Stim v1.8 Gate Reference

Gates supported by Stim

Pauli Gates
- I
- X
- Y
- Z
Single Qubit Clifford Gates
- C_XYZ
- C_ZYX
- H
- H_XY
- H_XZ
- H_YZ
- S
- SQRT_X
- SQRT_X_DAG
- SQRT_Y
- SQRT_Y_DAG
- SQRT_Z
- SQRT_Z_DAG
- S_DAG
Two Qubit Clifford Gates
- CNOT
- CX
- CY
- CZ
- ISWAP
- ISWAP_DAG
- SQRT_XX
- SQRT_XX_DAG
- SQRT_YY
- SQRT_YY_DAG
- SQRT_ZZ
- SQRT_ZZ_DAG
- SWAP
- XCX
- XCY
- XCZ
- YCX
- YCY
- YCZ
- ZCX
- ZCY
- ZCZ
Noise Channels
Collapsing Gates
- M
- MPP
- MR
- MRX
- MRY
- MRZ
- MX
- MY
- MZ
- R
- RX
- RY
- RZ
Control Flow
- REPEAT
Annotations

Pauli Gates

I

Identity gate. Does nothing to the target qubits.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to do nothing to.
- Example:
```
I 5
I 42
I 5 42
```
- Stabilizer Generators:
```
X -> +X
Z -> +Z
```
- Bloch Rotation:
```
Axis: 
Angle: 0 degrees
```
- Unitary Matrix:
```
[+1  ,     ]
[    , +1  ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `I 0`
# (no operations)
```
X

Pauli X gate. The bit flip gate.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
X 5
X 42
X 5 42
```
- Stabilizer Generators:
```
X -> +X
Z -> -Z
```
- Bloch Rotation:
```
Axis: +X
Angle: 180 degrees
```
- Unitary Matrix:
```
[    , +1  ]
[+1  ,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `X 0`
H 0
S 0
S 0
H 0
```
Y

Pauli Y gate.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
Y 5
Y 42
Y 5 42
```
- Stabilizer Generators:
```
X -> -X
Z -> -Z
```
- Bloch Rotation:
```
Axis: +Y
Angle: 180 degrees
```
- Unitary Matrix:
```
[    ,   -i]
[  +i,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `Y 0`
S 0
S 0
H 0
S 0
S 0
H 0
```
Z

Pauli Z gate. The phase flip gate.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
Z 5
Z 42
Z 5 42
```
- Stabilizer Generators:
```
X -> -X
Z -> +Z
```
- Bloch Rotation:
```
Axis: +Z
Angle: 180 degrees
```
- Unitary Matrix:
```
[+1  ,     ]
[    , -1  ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `Z 0`
S 0
S 0
```

Single Qubit Clifford Gates

C_XYZ

Right handed period 3 axis cycling gate, sending X -> Y -> Z -> X.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
C_XYZ 5
C_XYZ 42
C_XYZ 5 42
```
- Stabilizer Generators:
```
X -> +Y
Z -> +X
```
- Bloch Rotation:
```
Axis: +X+Y+Z
Angle: 120 degrees
```
- Unitary Matrix:
```
[+1-i, -1-i]
[+1-i, +1+i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `C_XYZ 0`
S 0
S 0
S 0
H 0
```
C_ZYX

Left handed period 3 axis cycling gate, sending Z -> Y -> X -> Z.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
C_ZYX 5
C_ZYX 42
C_ZYX 5 42
```
- Stabilizer Generators:
```
X -> +Z
Z -> +Y
```
- Bloch Rotation:
```
Axis: +X+Y+Z
Angle: -120 degrees
```
- Unitary Matrix:
```
[+1+i, +1+i]
[-1+i, +1-i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `C_ZYX 0`
H 0
S 0
```

H

Alternate name: H_XZ

The Hadamard gate. Swaps the X and Z axes.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubits to operate on.
Example:
```
H 5
H 42
H 5 42
```
Stabilizer Generators:
```
X -> +Z
Z -> +X
```
Bloch Rotation:
```
Axis: +X+Z
Angle: 180 degrees
```
Unitary Matrix:
```
[+1  , +1  ]
[+1  , -1  ] / sqrt(2)
```

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `H 0`
H 0

# (The decomposition is trivial because this gate is in the target gate set.)

H_XY

A variant of the Hadamard gate that swaps the X and Y axes (instead of X and Z).
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
H_XY 5
H_XY 42
H_XY 5 42
```
- Stabilizer Generators:
```
X -> +Y
Z -> -Z
```
- Bloch Rotation:
```
Axis: +X+Y
Angle: 180 degrees
```
- Unitary Matrix:
```
[    , +1-i]
[+1+i,     ] / sqrt(2)
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `H_XY 0`
H 0
S 0
S 0
H 0
S 0
```
H_YZ

A variant of the Hadamard gate that swaps the Y and Z axes (instead of X and Z).
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
H_YZ 5
H_YZ 42
H_YZ 5 42
```
- Stabilizer Generators:
```
X -> -X
Z -> +Y
```
- Bloch Rotation:
```
Axis: +Y+Z
Angle: 180 degrees
```
- Unitary Matrix:
```
[+1  ,   -i]
[  +i, -1  ] / sqrt(2)
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `H_YZ 0`
H 0
S 0
H 0
S 0
S 0
```
S

Alternate name: SQRT_Z

Principal square root of Z gate. Phases the amplitude of |1> by i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
S 5
S 42
S 5 42
```
- Stabilizer Generators:
```
X -> +Y
Z -> +Z
```
- Bloch Rotation:
```
Axis: +Z
Angle: 90 degrees
```
- Unitary Matrix:
```
[+1  ,     ]
[    ,   +i]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `S 0`
S 0

# (The decomposition is trivial because this gate is in the target gate set.)
```
SQRT_X

Principal square root of X gate. Phases the amplitude of |-> by i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
SQRT_X 5
SQRT_X 42
SQRT_X 5 42
```
- Stabilizer Generators:
```
X -> +X
Z -> -Y
```
- Bloch Rotation:
```
Axis: +X
Angle: 90 degrees
```
- Unitary Matrix:
```
[+1+i, +1-i]
[+1-i, +1+i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `SQRT_X 0`
H 0
S 0
H 0
```
SQRT_X_DAG

Adjoint of the principal square root of X gate. Phases the amplitude of |-> by -i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
SQRT_X_DAG 5
SQRT_X_DAG 42
SQRT_X_DAG 5 42
```
- Stabilizer Generators:
```
X -> +X
Z -> +Y
```
- Bloch Rotation:
```
Axis: +X
Angle: -90 degrees
```
- Unitary Matrix:
```
[+1-i, +1+i]
[+1+i, +1-i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `SQRT_X_DAG 0`
S 0
H 0
S 0
```
SQRT_Y

Principal square root of Y gate. Phases the amplitude of |-i> by i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
SQRT_Y 5
SQRT_Y 42
SQRT_Y 5 42
```
- Stabilizer Generators:
```
X -> -Z
Z -> +X
```
- Bloch Rotation:
```
Axis: +Y
Angle: 90 degrees
```
- Unitary Matrix:
```
[+1+i, -1-i]
[+1+i, +1+i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `SQRT_Y 0`
S 0
S 0
H 0
```
SQRT_Y_DAG

Adjoint of the principal square root of Y gate. Phases the amplitude of |-i> by -i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
SQRT_Y_DAG 5
SQRT_Y_DAG 42
SQRT_Y_DAG 5 42
```
- Stabilizer Generators:
```
X -> +Z
Z -> -X
```
- Bloch Rotation:
```
Axis: +Y
Angle: -90 degrees
```
- Unitary Matrix:
```
[+1-i, +1-i]
[-1+i, +1-i] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `SQRT_Y_DAG 0`
H 0
S 0
S 0
```
S_DAG

Alternate name: SQRT_Z_DAG

Adjoint of the principal square root of Z gate. Phases the amplitude of |1> by -i.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubits to operate on.
- Example:
```
S_DAG 5
S_DAG 42
S_DAG 5 42
```
- Stabilizer Generators:
```
X -> -Y
Z -> +Z
```
- Bloch Rotation:
```
Axis: +Z
Angle: -90 degrees
```
- Unitary Matrix:
```
[+1  ,     ]
[    ,   -i]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `S_DAG 0`
S 0
S 0
S 0
```

Two Qubit Clifford Gates

CX

Alternate name: ZCX

Alternate name: CNOT

The Z-controlled X gate. First qubit is the control, second qubit is the target. The first qubit can be replaced by a measurement record.

Applies an X gate to the target if the control is in the |1> state.

Negates the amplitude of the |1>|-> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
CX 5 6
CX 42 43
CX 5 6 42 43
CX rec[-1] 111
```
- Stabilizer Generators:
```
X_ -> +XX
Z_ -> +Z_
_X -> +_X
_Z -> +ZZ
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    ,     ,     , +1  ]
[    ,     , +1  ,     ]
[    , +1  ,     ,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `CX 0 1`
CNOT 0 1

# (The decomposition is trivial because this gate is in the target gate set.)
```
CY

Alternate name: ZCY

The Z-controlled Y gate. First qubit is the control, second qubit is the target. The first qubit can be replaced by a measurement record.

Applies a Y gate to the target if the control is in the |1> state.

Negates the amplitude of the |1>|-i> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
CY 5 6
CY 42 43
CY 5 6 42 43
CY rec[-1] 111
```
- Stabilizer Generators:
```
X_ -> +XY
Z_ -> +Z_
_X -> +ZX
_Z -> +ZZ
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    ,     ,     ,   -i]
[    ,     , +1  ,     ]
[    ,   +i,     ,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `CY 0 1`
S 1
S 1
S 1
CNOT 0 1
S 1
```
CZ

Alternate name: ZCZ

The Z-controlled Z gate. First qubit is the control, second qubit is the target. Either qubit can be replaced by a measurement record.

Applies a Z gate to the target if the control is in the |1> state.

Negates the amplitude of the |1>|1> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
CZ 5 6
CZ 42 43
CZ 5 6 42 43
CZ rec[-1] 111
CZ 111 rec[-1]
```
- Stabilizer Generators:
```
X_ -> +XZ
Z_ -> +Z_
_X -> +ZX
_Z -> +_Z
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    , +1  ,     ,     ]
[    ,     , +1  ,     ]
[    ,     ,     , -1  ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `CZ 0 1`
H 1
CNOT 0 1
H 1
```
ISWAP

Swaps two qubits and phases the -1 eigenspace of the ZZ observable by i. Equivalent to SWAP then CZ then S on both targets.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
ISWAP 5 6
ISWAP 42 43
ISWAP 5 6 42 43
```
- Stabilizer Generators:
```
X_ -> +ZY
Z_ -> +_Z
_X -> +YZ
_Z -> +Z_
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    ,     ,   +i,     ]
[    ,   +i,     ,     ]
[    ,     ,     , +1  ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `ISWAP 0 1`
CNOT 0 1
S 1
CNOT 1 0
CNOT 0 1
```

ISWAP_DAG

Swaps two qubits and phases the -1 eigenspace of the ZZ observable by -i. Equivalent to SWAP then CZ then S_DAG on both targets.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

ISWAP_DAG 5 6
ISWAP_DAG 42 43
ISWAP_DAG 5 6 42 43

Stabilizer Generators:

X_ -> -ZY
Z_ -> +_Z
_X -> -YZ
_Z -> +Z_

Unitary Matrix:

[+1  ,     ,     ,     ]
[    ,     ,   -i,     ]
[    ,   -i,     ,     ]
[    ,     ,     , +1  ]

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `ISWAP_DAG 0 1`
CNOT 0 1
S 1
S 1
S 1
CNOT 1 0
CNOT 0 1

SQRT_XX

Phases the -1 eigenspace of the XX observable by i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_XX 5 6
SQRT_XX 42 43
SQRT_XX 5 6 42 43

Stabilizer Generators:

X_ -> +X_
Z_ -> -YX
_X -> +_X
_Z -> -XY

Unitary Matrix:

[+1+i,     ,     , +1-i]
[    , +1+i, +1-i,     ]
[    , +1-i, +1+i,     ]
[+1-i,     ,     , +1+i] / 2

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_XX 0 1`
CNOT 0 1
H 0
S 0
H 0
CNOT 0 1

SQRT_XX_DAG

Phases the -1 eigenspace of the XX observable by -i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_XX_DAG 5 6
SQRT_XX_DAG 42 43
SQRT_XX_DAG 5 6 42 43

Stabilizer Generators:

X_ -> +X_
Z_ -> +YX
_X -> +_X
_Z -> +XY

Unitary Matrix:

[+1-i,     ,     , +1+i]
[    , +1-i, +1+i,     ]
[    , +1+i, +1-i,     ]
[+1+i,     ,     , +1-i] / 2

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_XX_DAG 0 1`
S 0
CNOT 0 1
H 0
S 0
CNOT 0 1

SQRT_YY

Phases the -1 eigenspace of the YY observable by i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_YY 5 6
SQRT_YY 42 43
SQRT_YY 5 6 42 43

Stabilizer Generators:

X_ -> -ZY
Z_ -> +XY
_X -> -YZ
_Z -> +YX

Unitary Matrix:

[+1+i,     ,     , -1+i]
[    , +1+i, +1-i,     ]
[    , +1-i, +1+i,     ]
[-1+i,     ,     , +1+i] / 2

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_YY 0 1`
S 0
CNOT 1 0
S 0
S 0
H 1
CNOT 1 0
S 0

SQRT_YY_DAG

Phases the -1 eigenspace of the YY observable by -i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_YY_DAG 5 6
SQRT_YY_DAG 42 43
SQRT_YY_DAG 5 6 42 43

Stabilizer Generators:

X_ -> +ZY
Z_ -> -XY
_X -> +YZ
_Z -> -YX

Unitary Matrix:

[+1-i,     ,     , -1-i]
[    , +1-i, +1+i,     ]
[    , +1+i, +1-i,     ]
[-1-i,     ,     , +1-i] / 2

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_YY_DAG 0 1`
CNOT 0 1
S 1
H 0
S 0
H 0
CNOT 1 0
CNOT 0 1

SQRT_ZZ

Phases the -1 eigenspace of the ZZ observable by i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_ZZ 5 6
SQRT_ZZ 42 43
SQRT_ZZ 5 6 42 43

Stabilizer Generators:

X_ -> +YZ
Z_ -> +Z_
_X -> +ZY
_Z -> +_Z

Unitary Matrix:

[+1  ,     ,     ,     ]
[    ,   +i,     ,     ]
[    ,     ,   +i,     ]
[    ,     ,     , +1  ]

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_ZZ 0 1`
CNOT 0 1
S 1
CNOT 0 1

SQRT_ZZ_DAG

Phases the -1 eigenspace of the ZZ observable by -i.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.

Example:

SQRT_ZZ_DAG 5 6
SQRT_ZZ_DAG 42 43
SQRT_ZZ_DAG 5 6 42 43

Stabilizer Generators:

X_ -> -YZ
Z_ -> +Z_
_X -> -ZY
_Z -> +_Z

Unitary Matrix:

[+1  ,     ,     ,     ]
[    ,   -i,     ,     ]
[    ,     ,   -i,     ]
[    ,     ,     , +1  ]

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SQRT_ZZ_DAG 0 1`
H 1
CNOT 0 1
H 1
S 0
S 0
S 0
S 1
S 1
S 1

SWAP

Swaps two qubits.

Parens Arguments:

This instruction takes no parens arguments.
Targets:

Qubit pairs to operate on.
Example:
```
SWAP 5 6
SWAP 42 43
SWAP 5 6 42 43
```

Stabilizer Generators:

X_ -> +_X
Z_ -> +_Z
_X -> +X_
_Z -> +Z_

Unitary Matrix:

[+1  ,     ,     ,     ]
[    ,     , +1  ,     ]
[    , +1  ,     ,     ]
[    ,     ,     , +1  ]

Decomposition (into H, S, CX, M, R):

# The following circuit is equivalent (up to global phase) to `SWAP 0 1`
CNOT 0 1
CNOT 1 0
CNOT 0 1

XCX

The X-controlled X gate. First qubit is the control, second qubit is the target.

Applies an X gate to the target if the control is in the |-> state.

Negates the amplitude of the |->|-> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
XCX 5 6
XCX 42 43
XCX 5 6 42 43
```
- Stabilizer Generators:
```
X_ -> +X_
Z_ -> +ZX
_X -> +_X
_Z -> +XZ
```
- Unitary Matrix:
```
[+1  , +1  , +1  , -1  ]
[+1  , +1  , -1  , +1  ]
[+1  , -1  , +1  , +1  ]
[-1  , +1  , +1  , +1  ] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `XCX 0 1`
H 0
CNOT 0 1
H 0
```
XCY

The X-controlled Y gate. First qubit is the control, second qubit is the target.

Applies a Y gate to the target if the control is in the |-> state.

Negates the amplitude of the |->|-i> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
XCY 5 6
XCY 42 43
XCY 5 6 42 43
```
- Stabilizer Generators:
```
X_ -> +X_
Z_ -> +ZY
_X -> +XX
_Z -> +XZ
```
- Unitary Matrix:
```
[+1  , +1  ,   -i,   +i]
[+1  , +1  ,   +i,   -i]
[  +i,   -i, +1  , +1  ]
[  -i,   +i, +1  , +1  ] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `XCY 0 1`
CNOT 1 0
H 0
S 0
CNOT 0 1
H 0
```
XCZ

The X-controlled Z gate. First qubit is the control, second qubit is the target. The second qubit can be replaced by a measurement record.

Applies a Z gate to the target if the control is in the |-> state.

Negates the amplitude of the |->|1> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
XCZ 5 6
XCZ 42 43
XCZ 5 6 42 43
XCZ 111 rec[-1]
```
- Stabilizer Generators:
```
X_ -> +X_
Z_ -> +ZZ
_X -> +XX
_Z -> +_Z
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    , +1  ,     ,     ]
[    ,     ,     , +1  ]
[    ,     , +1  ,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `XCZ 0 1`
CNOT 1 0
```
YCX

The Y-controlled X gate. First qubit is the control, second qubit is the target.

Applies an X gate to the target if the control is in the |-i> state.

Negates the amplitude of the |-i>|-> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
YCX 5 6
YCX 42 43
YCX 5 6 42 43
```
- Stabilizer Generators:
```
X_ -> +XX
Z_ -> +ZX
_X -> +_X
_Z -> +YZ
```
- Unitary Matrix:
```
[+1  ,   -i, +1  ,   +i]
[  +i, +1  ,   -i, +1  ]
[+1  ,   +i, +1  ,   -i]
[  -i, +1  ,   +i, +1  ] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `YCX 0 1`
CX 0 1
H 1
S 1
CX 1 0
H 1
```
YCY

The Y-controlled Y gate. First qubit is the control, second qubit is the target.

Applies a Y gate to the target if the control is in the |-i> state.

Negates the amplitude of the |-i>|-i> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
YCY 5 6
YCY 42 43
YCY 5 6 42 43
```
- Stabilizer Generators:
```
X_ -> +XY
Z_ -> +ZY
_X -> +YX
_Z -> +YZ
```
- Unitary Matrix:
```
[+1  ,   -i,   -i, +1  ]
[  +i, +1  , -1  ,   -i]
[  +i, -1  , +1  ,   -i]
[+1  ,   +i,   +i, +1  ] / 2
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `YCY 0 1`
H 0
S 0
H 0
CX 0 1
H 0
CX 1 0
S 0
```
YCZ

The Y-controlled Z gate. First qubit is the control, second qubit is the target. The second qubit can be replaced by a measurement record.

Applies a Z gate to the target if the control is in the |-i> state.

Negates the amplitude of the |-i>|1> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  Qubit pairs to operate on.
- Example:
```
YCZ 5 6
YCZ 42 43
YCZ 5 6 42 43
YCZ 111 rec[-1]
```
- Stabilizer Generators:
```
X_ -> +XZ
Z_ -> +ZZ
_X -> +YX
_Z -> +_Z
```
- Unitary Matrix:
```
[+1  ,     ,     ,     ]
[    , +1  ,     ,     ]
[    ,     ,     ,   -i]
[    ,     ,   +i,     ]
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `YCZ 0 1`
S 0
S 0
S 0
CNOT 1 0
S 0
```

Noise Channels

DEPOLARIZE1

The single qubit depolarizing channel.

Applies a randomly chosen Pauli with a given probability.
- Parens Arguments:
  
  A single float specifying the depolarization strength.
- Targets:
  
  Qubits to apply single-qubit depolarizing noise to.
- Pauli Mixture:
```
1-p: I
p/3: X
p/3: Y
p/3: Z
```
- Example:
```
DEPOLARIZE1(0.001) 5
DEPOLARIZE1(0.001) 42
DEPOLARIZE1(0.001) 5 42
```
DEPOLARIZE2

The two qubit depolarizing channel.

Applies a randomly chosen two-qubit Pauli product with a given probability.
- Parens Arguments:
  
  A single float specifying the depolarization strength.
- Targets:
  
  Qubit pairs to apply two-qubit depolarizing noise to.
- Pauli Mixture:
```
 1-p: II
p/15: IX
p/15: IY
p/15: IZ
p/15: XI
p/15: XX
p/15: XY
p/15: XZ
p/15: YI
p/15: YX
p/15: YY
p/15: YZ
p/15: ZI
p/15: ZX
p/15: ZY
p/15: ZZ
```
- Example:
```
DEPOLARIZE2(0.001) 5 6
DEPOLARIZE2(0.001) 42 43
DEPOLARIZE2(0.001) 5 6 42 43
```
E

Alternate name: CORRELATED_ERROR

Probabilistically applies a Pauli product error with a given probability. Sets the "correlated error occurred flag" to true if the error occurred. Otherwise sets the flag to false.

See also: ELSE_CORRELATED_ERROR.
- Parens Arguments:
  
  A single float specifying the probability of applying the Paulis making up the error.
- Targets:
  
  Pauli targets specifying the Paulis to apply when the error occurs. Note that, for backwards compatibility reasons, the targets are not combined using combiners (*). They are implicitly all combined.
- Example:
```
# With 60% probability, uniformly pick X1*Y2 or Z2*Z3 or X1*Y2*Z3.
CORRELATED_ERROR(0.2) X1 Y2
ELSE_CORRELATED_ERROR(0.25) Z2 Z3
ELSE_CORRELATED_ERROR(0.33333333333) X1 Y2 Z3
```
ELSE_CORRELATED_ERROR

Probabilistically applies a Pauli product error with a given probability, unless the "correlated error occurred flag" is set. If the error occurs, sets the "correlated error occurred flag" to true. Otherwise leaves the flag alone.

See also: CORRELATED_ERROR.
- Parens Arguments:
  
  A single float specifying the probability of applying the Paulis making up the error, conditioned on the "correlated error occurred flag" being False.
- Targets:
  
  Pauli targets specifying the Paulis to apply when the error occurs. Note that, for backwards compatibility reasons, the targets are not combined using combiners (*). They are implicitly all combined.
- Example:
```
# With 60% probability, uniformly pick X1*Y2 or Z2*Z3 or X1*Y2*Z3.
CORRELATED_ERROR(0.2) X1 Y2
ELSE_CORRELATED_ERROR(0.25) Z2 Z3
ELSE_CORRELATED_ERROR(0.33333333333) X1 Y2 Z3
```
PAULI_CHANNEL_1

A single qubit Pauli error channel with explicitly specified probabilities for each case.
- Parens Arguments:
  
  Three floats specifying disjoint Pauli case probabilities. px: Probability of applying an X operation. py: Probability of applying a Y operation. pz: Probability of applying a Z operation.
- Targets:
  
  Qubits to apply the custom noise channel to.
- Example:
```
# Sample errors from the distribution 10% X, 15% Y, 20% Z, 55% I.
# Apply independently to qubits 1, 2, 4.
PAULI_CHANNEL_1(0.1, 0.15, 0.2) 1 2 4
```
- Pauli Mixture:
```
1-px-py-pz: I
px: X
py: Y
pz: Z
```
PAULI_CHANNEL_2

A two qubit Pauli error channel with explicitly specified probabilities for each case.
- Parens Arguments:
  
  Fifteen floats specifying the disjoint probabilities of each possible Pauli pair that can occur (except for the non-error double identity case). The disjoint probability arguments are (in order):
  1. pix: Probability of applying an IX operation.
  2. piy: Probability of applying an IY operation.
  3. piz: Probability of applying an IZ operation.
  4. pxi: Probability of applying an XI operation.
  5. pxx: Probability of applying an XX operation.
  6. pxy: Probability of applying an XY operation.
  7. pxz: Probability of applying an XZ operation.
  8. pyi: Probability of applying a YI operation.
  9. pyx: Probability of applying a YX operation.
  10. pyy: Probability of applying a YY operation.
  11. pyz: Probability of applying a YZ operation.
  12. pzi: Probability of applying a ZI operation.
  13. pzx: Probability of applying a ZX operation.
  14. pzy: Probability of applying a ZY operation.
  15. pzz: Probability of applying a ZZ operation.
- Targets:
  
  Pairs of qubits to apply the custom noise channel to. There must be an even number of targets.
- Example:
```
# Sample errors from the distribution 10% XX, 20% YZ, 70% II.
# Apply independently to qubit pairs (1,2), (5,6), and (8,3)
PAULI_CHANNEL_2(0,0,0, 0.1,0,0,0, 0,0,0,0.2, 0,0,0,0) 1 2 5 6 8 3
```
- Pauli Mixture:
```
1-pix-piy-piz-pxi-pxx-pxy-pxz-pyi-pyx-pyy-pyz-pzi-pzx-pzy-pzz: II
pix: IX
piy: IY
piz: IZ
pxi: XI
pxx: XX
pxy: XY
pxz: XZ
pyi: YI
pyx: YX
pyy: YY
pyz: YZ
pzi: ZI
pzx: ZX
pzy: ZY
pzz: ZZ
```
X_ERROR

Applies a Pauli X with a given probability.
- Parens Arguments:
  
  A single float specifying the probability of applying an X operation.
- Targets:
  
  Qubits to apply bit flip noise to.
- Pauli Mixture:
```
1-p: I
 p : X
```
- Example:
```
X_ERROR(0.001) 5
X_ERROR(0.001) 42
X_ERROR(0.001) 5 42
```
Y_ERROR

Applies a Pauli Y with a given probability.
- Parens Arguments:
  
  A single float specifying the probability of applying a Y operation.
- Targets:
  
  Qubits to apply Y flip noise to.
- Pauli Mixture:
```
1-p: I
 p : Y
```
- Example:
```
Y_ERROR(0.001) 5
Y_ERROR(0.001) 42
Y_ERROR(0.001) 5 42
```
Z_ERROR

Applies a Pauli Z with a given probability.
- Parens Arguments:
  
  A single float specifying the probability of applying a Z operation.
- Targets:
  
  Qubits to apply phase flip noise to.
- Pauli Mixture:
```
1-p: I
 p : Z
```
- Example:
```
Z_ERROR(0.001) 5
Z_ERROR(0.001) 42
Z_ERROR(0.001) 5 42
```

Collapsing Gates

M

Alternate name: MZ

Z-basis measurement (optionally noisy). Projects each target qubit into |0> or |1> and reports its value (false=|0>, true=|1>).
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure in the Z basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
M 5
M !42
M(0.001) 5 !42
```
- Stabilizer Generators:
```
Z -> m xor chance(p)
Z -> +Z
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `M 0`
M 0

# (The decomposition is trivial because this gate is in the target gate set.)
```
MPP

Measure Pauli products.
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  A series of Pauli products to measure.
  
  Each Pauli product is a series of Pauli targets ([XYZ]#) separated by combiners (*). Products can be negated by prefixing a Pauli target in the product with an inverter (!)
- Example:
```
# Measure the two-body +X1*Y2 observable.
MPP X1*Y2

# Measure the one-body -Z5 observable.
MPP !Z5

# Measure the two-body +X1*Y2 observable and also the three-body -Z3*Z4*Z5 observable.
MPP X1*Y2 !Z3*Z4*Z5

# Noisily measure +Z1+Z2 and +X1*X2 (independently flip each reported result 0.1% of the time).
MPP(0.001) Z1*Z2 X1*X2
```
If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.

Prefixing a target with ! inverts its recorded measurement result.
- Stabilizer Generators:
```
P -> m xor chance(p)
P -> P
```
MR

Alternate name: MRZ

Z-basis demolition measurement (optionally noisy). Projects each target qubit into |0> or |1>, reports its value (false=|0>, true=|1>), then resets to |0>.
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure and reset in the Z basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
MR 5
MR !42
MR(0.001) 5 !42
```
- Stabilizer Generators:
```
Z -> m xor chance(p)
1 -> +Z
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `MR 0`
M 0
R 0
```
MRX

X-basis demolition measurement (optionally noisy). Projects each target qubit into |+> or |->, reports its value (false=|+>, true=|->), then resets to |+>.
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure and reset in the X basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
MRX 5
MRX !42
MRX(0.001) 5 !42
```
- Stabilizer Generators:
```
X -> m xor chance(p)
1 -> +X
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `MRX 0`
H 0
M 0
R 0
H 0
```
MRY

Y-basis demolition measurement (optionally noisy). Projects each target qubit into |i> or |-i>, reports its value (false=|i>, true=|-i>), then resets to |i>.
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure and reset in the Y basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
MRY 5
MRY !42
MRY(0.001) 5 !42
```
- Stabilizer Generators:
```
Y -> m xor chance(p)
1 -> +Y
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `MRY 0`
S 0
S 0
S 0
H 0
R 0
M 0
H 0
S 0
```
MX

X-basis measurement (optionally noisy). Projects each target qubit into |+> or |-> and reports its value (false=|+>, true=|->).
- Parens Arguments:
  
  Optional. A single float specifying A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure in the X basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
MX 5
MX !42
MX(0.001) 5 !42
```
- Stabilizer Generators:
```
X -> +m xor chance(p)
X -> +X
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `MX 0`
H 0
M 0
H 0
```
MY

Y-basis measurement (optionally noisy). Projects each target qubit into |i> or |-i> and reports its value (false=|i>, true=|-i>).
- Parens Arguments:
  
  Optional. A single float specifying the probability of flipping each reported measurement result.
- Targets:
  
  The qubits to measure in the Y basis. Prefixing a qubit target with ! flips its reported measurement result. If this gate is parameterized by a probability argument, the recorded result will be flipped with that probability. If not, the recorded result is noiseless. Note that the noise only affects the recorded result, not the target qubit's state.
Prefixing a target with ! inverts its recorded measurement result.
- Example:
```
MY 5
MY !42
MY(0.001) 5 !42
```
- Stabilizer Generators:
```
Y -> m xor chance(p)
Y -> +Y
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `MY 0`
S 0
S 0
S 0
H 0
M 0
H 0
S 0
```
R

Alternate name: RZ

Z-basis reset. Forces each target qubit into the |0> state by silently measuring it in the Z basis and applying an X gate if it ended up in the |1> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  The qubits to reset in the Z basis.
- Example:
```
R 5
R 42
R 5 42
```
- Stabilizer Generators:
```
1 -> +Z
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `R 0`
R 0

# (The decomposition is trivial because this gate is in the target gate set.)
```
RX

X-basis reset. Forces each target qubit into the |+> state by silently measuring it in the X basis and applying a Z gate if it ended up in the |-> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  The qubits to reset in the X basis.
- Example:
```
RX 5
RX 42
RX 5 42
```
- Stabilizer Generators:
```
1 -> +X
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `RX 0`
H 0
R 0
H 0
```
RY

Y-basis reset. Forces each target qubit into the |i> state by silently measuring it in the Y basis and applying an X gate if it ended up in the |-i> state.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  The qubits to reset in the Y basis.
- Example:
```
RY 5
RY 42
RY 5 42
```
- Stabilizer Generators:
```
1 -> +Y
```
- Decomposition (into H, S, CX, M, R):
```
# The following circuit is equivalent (up to global phase) to `RY 0`
S 0
S 0
S 0
H 0
R 0
H 0
S 0
```

Control Flow

REPEAT

Repeats the instructions in its body N times.

Currently, repetition counts of 0 are not allowed because they create corner cases with ambiguous resolutions. For example, if a logical observable is only given measurements inside a repeat block with a repetition count of 0, it's ambiguous whether the output of sampling the logical observables includes a bit for that logical observable.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  A positive integer in [1, 10^18] specifying the number of repetitions.
- Example:
```
REPEAT 2 {
    CNOT 0 1
    CNOT 2 1
    M 1
}
REPEAT 10000000 {
    CNOT 0 1
    CNOT 2 1
    M 1
    DETECTOR rec[-1] rec[-3]
}
```

Annotations

DETECTOR

Annotates that a set of measurements can be used to detect errors, because the set's parity should be deterministic.

Note that it is not necessary to say whether the measurement set's parity is even or odd; all that matters is that the parity should be consistent when running the circuit and omitting all noisy operations. Note that, for example, this means that even though X and X_ERROR(1) have equivalent effects on the measurements making up a detector, they have differing effects on the detector (because X is intended, determining the expected value, and X_ERROR is noise, causing deviations from the expected value).

Detectors are ignored when sampling measurements, but produce results when sampling detection events. In detector sampling mode, each detector produces a result bit (where 0 means "measurement set had expected parity" and 1 means "measurement set had incorrect parity"). When converting a circuit into a detector error model, errors are grouped based on the detectors they flip (the "symptoms" of the error) and the observables they flip (the "frame changes" of the error).

It is permitted, though not recommended, for the measurement set given to a DETECTOR instruction to have inconsistent parity. When a detector's measurement set is inconsistent, the detector is called a "gauge detector" and the expected parity of the measurement set is chosen arbitrarily (in an implementation-defined way). Some circuit analysis tools (such as the circuit-to-detector-error-model conversion) will by default refuse to process circuits containing gauge detectors. Gauge detectors produce random results when sampling detection events, though these results will be appropriately correlated with other gauge detectors. For example, if DETECTOR rec[-1] and DETECTOR rec[-2] are gauge detectors but DETECTOR rec[-1] rec[-2] is not, then under noiseless execution the two gauge detectors would either always produce the same result or always produce opposite results.

Detectors can specify coordinates using their parens arguments. Coordinates have no effect on simulations, but can be useful to tools consuming the circuit. For example, a tool drawing how the detectors in a circuit relate to each other can use the coordinates as hints for where to place the detectors in the drawing.
- Parens Arguments:
  
  Optional. Coordinate metadata, relative to the current coordinate offset accumulated from SHIFT_COORDS instructions. Can be any number of coordinates from 1 to 16. There is no required convention for which coordinate is which.
- Targets:
  
  The measurement records to XOR together to get the deterministic-under-noiseless-execution parity.
- Example:
```
R 0
X_ERROR(0.1) 0
M 0  # This measurement is always False under noiseless execution.
# Annotate that most recent measurement should be deterministic.
DETECTOR rec[-1]

R 0
X 0
X_ERROR(0.1) 0
M 0  # This measurement is always True under noiseless execution.
# Annotate that most recent measurement should be deterministic.
DETECTOR rec[-1]

R 0 1
H 0
CNOT 0 1
DEPOLARIZE2(0.001) 0 1
M 0 1  # These two measurements are always equal under noiseless execution.
# Annotate that the parity of the previous two measurements should be consistent.
DETECTOR rec[-1] rec[-2]

# A series of trivial detectors with hinted coordinates along the diagonal line Y = 2X + 3.
REPEAT 100 {
    R 0
    M 0
    SHIFT_COORDS(1, 2)
    DETECTOR(0, 3) rec[-1]
}
```
OBSERVABLE_INCLUDE

Adds measurement records to a specified logical observable.

A potential point of confusion here is that Stim's notion of a logical observable is nothing more than a set of measurements, potentially spanning across the entire circuit, that together produce a deterministic result. It's more akin to the "boundary of a parity sheet" in a topological spacetime diagram than it is to the notion of a qubit observable. For example, consider a surface code memory experiment that initializes a logical |0>, preserves the state noise, and eventually performs a logical Z basis measurement. The circuit representing this experiment would use OBSERVABLE_INCLUDE instructions to specifying which physical measurements within the logical Z basis measurement should be XOR'd together to get the logical measurement result. This effectively identifies the logical Z observable. But the circuit would not declare an X observable, because the X observable is not deterministic in a Z basis memory experiment; it has no corresponding deterministic measurement set.

Logical observables are ignored when sampling measurements, but can produce results (if requested) when sampling detection events. In detector sampling mode, each observable can produce a result bit (where 0 means "measurement set had expected parity" and 1 means "measurement set had incorrect parity"). When converting a circuit into a detector error model, errors are grouped based on the detectors they flip (the "symptoms" of the error) and the observables they flip (the "frame changes" of the error).

Another potential point of confusion is that when sampling logical measurement results, as part of sampling detection events in the circuit, the reported results are not measurements of the logical observable but rather whether those measurement results were flipped. This has significant simulation speed benefits, and also makes it so that it is not necessary to say whether the logical measurement result is supposed to be False or True. Note that, for example, this means that even though X and X_ERROR(1) have equivalent effects on the measurements making up an observable, they have differing effects on the reported value of an observable when sampling detection events (because X is intended, determining the expected value, and X_ERROR is noise, causing deviations from the expected value).

It is not recommended for the measurement set of an observable to have inconsistent parity. For example, the circuit-to-detector-error-model conversion will refuse to operate on circuits containing such observables.
- Parens Arguments:
  
  A non-negative integer specifying the index of the logical observable to add the measurement records to.
- Targets:
  
  The measurement records to add to the specified observable.
- Example:
```
R 0 1
H 0
CNOT 0 1
M 0 1
# Observable 0 is the parity of the previous two measurements.
OBSERVABLE_INCLUDE(0) rec[-1] rec[-2]

R 0 1
H 0
CNOT 0 1
M 0 1
# Observable 1 is the parity of the previous measurement...
OBSERVABLE_INCLUDE(1) rec[-1]
# ...and the one before that.
OBSERVABLE_INCLUDE(1) rec[-2]
```
QUBIT_COORDS

Annotates the location of a qubit.

Coordinates are not required and have no effect on simulations, but can be useful to tools consuming the circuit. For example, a tool drawing the circuit can use the coordinates as hints for where to place the qubits in the drawing. stimcirq uses QUBIT_COORDS instructions to preserve cirq.LineQubit and cirq.GridQubit coordinates when converting between stim circuits and cirq circuits

A qubit's coordinates can be specified multiple times, with the intended interpretation being that the qubit is at the location of the most recent assignment. For example, this could be used to indicate a simulated qubit is iteratively playing the role of many physical qubits.
- Parens Arguments:
  
  Optional. The latest coordinates of the qubit, relative to accumulated offsets from SHIFT_COORDS instructions. Can be any number of coordinates from 1 to 16. There is no required convention for which coordinate is which.
- Targets:
  
  The qubit or qubits the coordinates apply to.
- Example:
```
# Annotate that qubits 0 to 3 are at the corners of a square.
QUBIT_COORDS(0, 0) 0
QUBIT_COORDS(0, 1) 1
QUBIT_COORDS(1, 0) 2
QUBIT_COORDS(1, 1) 3
```
SHIFT_COORDS

Accumulates offsets that affect qubit coordinates and detector coordinates.

Note: when qubit/detector coordinates use fewer dimensions than SHIFT_COORDS, the offsets from the additional dimensions are ignored (i.e. not specifying a dimension is different from specifying it to be 0).

See also: QUBIT_COORDS, DETECTOR.
- Parens Arguments:
  
  Offsets to add into the current coordinate offset. Can be any number of coordinate offsets from 1 to 16. There is no required convention for which coordinate is which.
- Targets:
  
  This instruction takes no targets.
- Example:
```
SHIFT_COORDS(500.5)
QUBIT_COORDS(1510) 0  # Actually at 2010.5
SHIFT_COORDS(1500)
QUBIT_COORDS(11) 1    # Actually at 2011.5
QUBIT_COORDS(10.5) 2  # Actually at 2011.0

# Declare some detectors with coordinates along a diagonal line.
REPEAT 1000 {
    CNOT 0 2
    CNOT 1 2
    MR 2
    DETECTOR(10.5, 0) rec[-1] rec[-2]  # Actually at (2011.0, iteration_count).
    SHIFT_COORDS(0, 1)  # Advance 2nd coordinate to track loop iterations.
}
```
TICK

Annotates the end of a layer of gates, or that time is advancing.

This instruction is not necessary, it has no effect on simulations, but it can be used by tools that are transforming or visualizing the circuit. For example, a tool that adds noise to a circuit may include cross-talk terms that require knowing whether or not operations are happening in the same time step or not.

TICK instructions are added, and checked for, by stimcirq in order to preserve the moment structure of cirq circuits converted between stim circuits and cirq circuits.
- Parens Arguments:
  
  This instruction takes no parens arguments.
- Targets:
  
  This instruction takes no targets.
- Example:
```
# First time step.
H 0
CZ 1 2
TICK

# Second time step.
H 1
TICK

# Empty time step.
TICK
```

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Stim v1.8 Gate Reference

Gates supported by Stim

Pauli Gates

Single Qubit Clifford Gates

Two Qubit Clifford Gates

Noise Channels

Collapsing Gates

Control Flow

Annotations

Clone this wiki locally