Clean up commented out debug print statements

Tests/make_hash.py

@@ -52,10 +52,5 @@ def check(size, i0):
 
 print()
 
-# print(check(min_size, min_start))
-
 print("#define ACCESS_TABLE_SIZE", min_size)
 print("#define ACCESS_TABLE_HASH", min_start)
-
-# for m in modes:
-#     print(m, "=>", hash(m, min_start) % min_size)

Tests/test_bmp_reference.py

@@ -22,7 +22,6 @@ def test_bad(self):
                 im.load()
             except Exception:  # as msg:
                 pass
-                # print("Bad Image %s: %s" %(f,msg))
 
     def test_questionable(self):
         """ These shouldn't crash/dos, but it's not well defined that these
@@ -47,7 +46,6 @@ def test_questionable(self):
             except Exception:  # as msg:
                 if os.path.basename(f) in supported:
                     raise
-                # print("Bad Image %s: %s" %(f,msg))
 
     def test_good(self):
         """ These should all work. There's a set of target files in the

Tests/test_format_hsv.py

@@ -47,10 +47,6 @@ def wedge(self):
 
         img = Image.merge('RGB', (r, g, b))
 
-        # print(("%d, %d -> "% (int(1.75*px),int(.25*px))) + \
-        #        "(%s, %s, %s)"%img.getpixel((1.75*px, .25*px)))
-        # print(("%d, %d -> "% (int(.75*px),int(.25*px))) + \
-        #        "(%s, %s, %s)"%img.getpixel((.75*px, .25*px)))
         return img
 
     def to_xxx_colorsys(self, im, func, mode):
@@ -95,32 +91,16 @@ def test_wedge(self):
         im = src.convert('HSV')
         comparable = self.to_hsv_colorsys(src)
 
-        # print(im.getpixel((448, 64)))
-        # print(comparable.getpixel((448, 64)))
-
-        # print(im.split()[0].histogram())
-        # print(comparable.split()[0].histogram())
-
-        # im.split()[0].show()
-        # comparable.split()[0].show()
-
         self.assert_image_similar(im.getchannel(0), comparable.getchannel(0),
                                   1, "Hue conversion is wrong")
         self.assert_image_similar(im.getchannel(1), comparable.getchannel(1),
                                   1, "Saturation conversion is wrong")
         self.assert_image_similar(im.getchannel(2), comparable.getchannel(2),
                                   1, "Value conversion is wrong")
 
-        # print(im.getpixel((192, 64)))
-
         comparable = src
         im = im.convert('RGB')
 
-        # im.split()[0].show()
-        # comparable.split()[0].show()
-        # print(im.getpixel((192, 64)))
-        # print(comparable.getpixel((192, 64)))
-
         self.assert_image_similar(im.getchannel(0), comparable.getchannel(0),
                                   3, "R conversion is wrong")
         self.assert_image_similar(im.getchannel(1), comparable.getchannel(1),
@@ -132,12 +112,6 @@ def test_convert(self):
         im = hopper('RGB').convert('HSV')
         comparable = self.to_hsv_colorsys(hopper('RGB'))
 
-#        print([ord(x) for x  in im.split()[0].tobytes()[:80]])
-#        print([ord(x) for x  in comparable.split()[0].tobytes()[:80]])
-
-#        print(im.split()[0].histogram())
-#        print(comparable.split()[0].histogram())
-
         self.assert_image_similar(im.getchannel(0), comparable.getchannel(0),
                                   1, "Hue conversion is wrong")
         self.assert_image_similar(im.getchannel(1), comparable.getchannel(1),
@@ -150,12 +124,6 @@ def test_hsv_to_rgb(self):
         converted = comparable.convert('RGB')
         comparable = self.to_rgb_colorsys(comparable)
 
-        # print(converted.split()[1].histogram())
-        # print(target.split()[1].histogram())
-
-        # print([ord(x) for x  in target.split()[1].tobytes()[:80]])
-        # print([ord(x) for x  in converted.split()[1].tobytes()[:80]])
-
         self.assert_image_similar(converted.getchannel(0),
                                   comparable.getchannel(0),
                                   3, "R conversion is wrong")

Tests/test_image_resample.py

@@ -352,18 +352,15 @@ def test_box_vertical(self):
 class CoreResampleCoefficientsTest(PillowTestCase):
     def test_reduce(self):
         test_color = 254
-        # print()
 
         for size in range(400000, 400010, 2):
-            # print(size)
             i = Image.new('L', (size, 1), 0)
             draw = ImageDraw.Draw(i)
             draw.rectangle((0, 0, i.size[0] // 2 - 1, 0), test_color)
 
             px = i.resize((5, i.size[1]), Image.BICUBIC).load()
             if px[2, 0] != test_color // 2:
                 self.assertEqual(test_color // 2, px[2, 0])
-                # print('>', size, test_color // 2, px[2, 0])
 
     def test_nonzero_coefficients(self):
         # regression test for the wrong coefficients calculation

Tests/test_imagewin_pointers.py

@@ -96,7 +96,6 @@ def test_pointer(self):
             hdr.biClrImportant = 0
 
             hdc = CreateCompatibleDC(None)
-            # print('hdc:',hex(hdc))
             pixels = ctypes.c_void_p()
             dib = CreateDIBSection(hdc, ctypes.byref(hdr), DIB_RGB_COLORS,
                                    ctypes.byref(pixels), None, 0)

Tests/test_numpy.py

@@ -34,7 +34,6 @@ def to_image(dtype, bands=1, boolean=0):
                 i = Image.fromarray(a)
                 if list(i.getchannel(0).getdata()) != list(range(100)):
                     print("data mismatch for", dtype)
-            # print(dtype, list(i.getdata()))
             return i
 
         # Check supported 1-bit integer formats

src/PIL/BdfFontFile.py

@@ -110,20 +110,6 @@ def __init__(self, fp):
                 if s.find(b"LogicalFontDescription") < 0:
                     comments.append(s[i+1:-1].decode('ascii'))
 
-        # font = props["FONT"].split("-")
-
-        # font[4] = bdf_slant[font[4].upper()]
-        # font[11] = bdf_spacing[font[11].upper()]
-
-        # ascent = int(props["FONT_ASCENT"])
-        # descent = int(props["FONT_DESCENT"])
-
-        # fontname = ";".join(font[1:])
-
-        # print("#", fontname)
-        # for i in comments:
-        #       print("#", i)
-
         while True:
             c = bdf_char(fp)
             if not c:

src/PIL/CurImagePlugin.py

@@ -56,14 +56,6 @@ def _open(self):
                 m = s
             elif i8(s[0]) > i8(m[0]) and i8(s[1]) > i8(m[1]):
                 m = s
-            # print("width", i8(s[0]))
-            # print("height", i8(s[1]))
-            # print("colors", i8(s[2]))
-            # print("reserved", i8(s[3]))
-            # print("hotspot x", i16(s[4:]))
-            # print("hotspot y", i16(s[6:]))
-            # print("bytes", i32(s[8:]))
-            # print("offset", i32(s[12:]))
         if not m:
             raise TypeError("No cursors were found")
 

src/PIL/EpsImagePlugin.py

@@ -82,7 +82,6 @@ def Ghostscript(tile, size, fp, scale=1):
     # resolution is dependent on bbox and size
     res = (float((72.0 * size[0]) / (bbox[2]-bbox[0])),
            float((72.0 * size[1]) / (bbox[3]-bbox[1])))
-    # print("Ghostscript", scale, size, orig_size, bbox, orig_bbox, res)
 
     import subprocess
     import tempfile

src/PIL/FontFile.py

@@ -90,7 +90,6 @@ def compile(self):
                     x = xx
                 s = src[0] + x0, src[1] + y0, src[2] + x0, src[3] + y0
                 self.bitmap.paste(im.crop(src), s)
-                # print(chr(i), dst, s)
                 self.metrics[i] = d, dst, s
 
     def save(self, filename):

src/PIL/FpxImagePlugin.py

@@ -114,8 +114,6 @@ def _open_index(self, index=1):
             if id in prop:
                 self.jpeg[i] = prop[id]
 
-        # print(len(self.jpeg), "tables loaded")
-
         self._open_subimage(1, self.maxid)
 
     def _open_subimage(self, index=1, subimage=0):
@@ -143,8 +141,6 @@ def _open_subimage(self, index=1, subimage=0):
         offset = i32(s, 28)
         length = i32(s, 32)
 
-        # print(size, self.mode, self.rawmode)
-
         if size != self.size:
             raise IOError("subimage mismatch")
 

src/PIL/Image.py

@@ -443,7 +443,6 @@ def _getdecoder(mode, decoder_name, args, extra=()):
     try:
         # get decoder
         decoder = getattr(core, decoder_name + "_decoder")
-        # print(decoder, mode, args + extra)
         return decoder(mode, *args + extra)
     except AttributeError:
         raise IOError("decoder %s not available" % decoder_name)
@@ -465,7 +464,6 @@ def _getencoder(mode, encoder_name, args, extra=()):
     try:
         # get encoder
         encoder = getattr(core, encoder_name + "_encoder")
-        # print(encoder, mode, args + extra)
         return encoder(mode, *args + extra)
     except AttributeError:
         raise IOError("encoder %s not available" % encoder_name)
@@ -2470,7 +2468,6 @@ def fromarray(obj, mode=None):
             typekey = (1, 1) + shape[2:], arr['typestr']
             mode, rawmode = _fromarray_typemap[typekey]
         except KeyError:
-            # print(typekey)
             raise TypeError("Cannot handle this data type")
     else:
         rawmode = mode

src/PIL/ImageMorph.py

@@ -151,11 +151,6 @@ def build_lut(self):
 
             patterns += self._pattern_permute(pattern, options, result)
 
-#        # Debugging
-#        for p, r in patterns:
-#            print(p, r)
-#        print('--')
-
         # compile the patterns into regular expressions for speed
         for i, pattern in enumerate(patterns):
             p = pattern[0].replace('.', 'X').replace('X', '[01]')

src/PIL/IptcImagePlugin.py

@@ -103,8 +103,6 @@ def _open(self):
             else:
                 self.info[tag] = tagdata
 
-            # print(tag, self.info[tag])
-
         # mode
         layers = i8(self.info[(3, 60)][0])
         component = i8(self.info[(3, 60)][1])

src/PIL/JpegImagePlugin.py

@@ -334,7 +334,6 @@ def _open(self):
 
             if i in MARKER:
                 name, description, handler = MARKER[i]
-                # print(hex(i), name, description)
                 if handler is not None:
                     handler(self, i)
                 if i == 0xFFDA:  # start of scan

src/PIL/SpiderImagePlugin.py

@@ -74,7 +74,6 @@ def isSpiderHeader(t):
     labrec = int(h[13])   # no. records in file header
     labbyt = int(h[22])   # total no. of bytes in header
     lenbyt = int(h[23])   # record length in bytes
-    # print("labrec = %d, labbyt = %d, lenbyt = %d" % (labrec,labbyt,lenbyt))
     if labbyt != (labrec * lenbyt):
         return 0
     # looks like a valid header

src/PIL/TiffImagePlugin.py

@@ -1254,9 +1254,6 @@ def _setup(self):
             h = self.tag_v2.get(ROWSPERSTRIP, ysize)
             w = self.size[0]
             if READ_LIBTIFF or self._compression != 'raw':
-                # if DEBUG:
-                #     print("Activating g4 compression for whole file")
-
                 # Decoder expects entire file as one tile.
                 # There's a buffer size limit in load (64k)
                 # so large g4 images will fail if we use that
@@ -1529,7 +1526,6 @@ def _save(im, fp, filename):
             rawmode = 'I;16N'
 
         a = (rawmode, compression, _fp, filename, atts)
-        # print(im.mode, compression, a, im.encoderconfig)
         e = Image._getencoder(im.mode, 'libtiff', a, im.encoderconfig)
         e.setimage(im.im, (0, 0)+im.size)
         while True:

src/PIL/WmfImagePlugin.py

@@ -109,8 +109,6 @@ def _open(self):
 
             self.info["dpi"] = 72
 
-            # print(self.mode, self.size, self.info)
-
             # sanity check (standard metafile header)
             if s[22:26] != b"\x01\x00\t\x00":
                 raise SyntaxError("Unsupported WMF file format")