[Telink] Flash various sizes support

.github/workflows/examples-telink.yaml

@@ -124,25 +124,25 @@ jobs:
             - name: clean out build output (keep tools)
               run: rm -rf ./out/telink*
 
-            - name: Build example Telink (B91) Lighting App with RPC, Shell and Factory Data
+            - name: Build example Telink (B91) Lighting App with OTA, RPC, Factory Data and 4Mb flash
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-light-rpc-shell-factory-data' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-light-ota-rpc-factory-data-4mb' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9518adk80d lighting-app-rpc-shell-factory-data \
-                    out/telink-tlsr9518adk80d-light-rpc-shell-factory-data/zephyr/zephyr.elf \
+                    telink tlsr9518adk80d lighting-app-ota-rpc-factory-data-4mb \
+                    out/telink-tlsr9518adk80d-light-ota-rpc-factory-data-4mb/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output (keep tools)
               run: rm -rf ./out/telink*
 
-            - name: Build example Telink (B92) Light Switch App with RPC, Shell and Factory Data
+            - name: Build example Telink (B92) Light Switch App with OTA, Shell, Factory Data
               run: |
                   ./scripts/run_in_build_env.sh \
-                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-light-switch-rpc-shell-factory-data' build"
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9528a-light-switch-ota-shell-factory-data' build"
                   .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
-                    telink tlsr9528a light-switch-app-rpc-shell-factory-data \
-                    out/telink-tlsr9528a-light-switch-rpc-shell-factory-data/zephyr/zephyr.elf \
+                    telink tlsr9528a light-switch-app-ota-shell-factory-data \
+                    out/telink-tlsr9528a-light-switch-ota-shell-factory-data/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
             - name: clean out build output

config/telink/chip-module/CMakeLists.txt

@@ -165,6 +165,13 @@ else()
     unset(GLOBAL_BOOTLOADER_CONF_OVERLAY_FILE)
 endif()
 
+set(BLOCK_SIZE "1024")
+
+# get code-partition mcuboot_partition size
+dt_nodelabel(dts_partition_path NODELABEL "boot_partition")
+dt_reg_size(mcuboot_size PATH ${dts_partition_path})
+math(EXPR boot_blocks "${mcuboot_size} / ${BLOCK_SIZE}" OUTPUT_FORMAT DECIMAL)
+
 if (CONFIG_CHIP_OTA_IMAGE_BUILD)
     add_custom_target(build_mcuboot ALL
         COMMAND
@@ -176,7 +183,7 @@ if (CONFIG_CHIP_OTA_IMAGE_BUILD)
         COMMAND
         dd if=${PROJECT_BINARY_DIR}/../modules/chip-module/build_mcuboot/zephyr/zephyr.bin of=${PROJECT_BINARY_DIR}/zephyr.bin
         COMMAND
-        dd if=${PROJECT_BINARY_DIR}/zephyr.signed.bin of=${PROJECT_BINARY_DIR}/zephyr.bin bs=1024 seek=100
+        dd if=${PROJECT_BINARY_DIR}/zephyr.signed.bin of=${PROJECT_BINARY_DIR}/zephyr.bin bs=${BLOCK_SIZE} seek=${boot_blocks}
     )
 
     chip_ota_image(chip-ota-image
@@ -188,16 +195,21 @@ if (CONFIG_CHIP_OTA_IMAGE_BUILD)
     add_dependencies(chip-ota-image ${ZEPHYR_FINAL_EXECUTABLE})
 endif()
 
+# get code-partition factory_partition address
+dt_nodelabel(dts_partition_path NODELABEL "factory_partition")
+dt_reg_addr(factory_size PATH ${dts_partition_path})
+math(EXPR factory_blocks "${factory_size} / ${BLOCK_SIZE}" OUTPUT_FORMAT DECIMAL)
+
 if (CONFIG_CHIP_FACTORY_DATA_MERGE_WITH_FIRMWARE)
-    add_custom_target(merge_factory_data ALL
-        COMMAND
-        dd if=${PROJECT_BINARY_DIR}/factory/factory_data.bin of=${PROJECT_BINARY_DIR}/zephyr.bin bs=1024 seek=1052
-    )
-if (CONFIG_CHIP_OTA_IMAGE_BUILD)
+  add_custom_target(merge_factory_data ALL
+    COMMAND
+    dd if=${PROJECT_BINARY_DIR}/factory/factory_data.bin of=${PROJECT_BINARY_DIR}/zephyr.bin bs=${BLOCK_SIZE} seek=${factory_blocks}
+  )
+  if (CONFIG_CHIP_OTA_IMAGE_BUILD)
     add_dependencies(merge_factory_data merge_mcuboot)
-else()
+  else()
     add_dependencies(merge_factory_data ${ZEPHYR_FINAL_EXECUTABLE})
-endif()
+  endif()
 endif()
 
 # ==============================================================================

config/telink/chip-module/generate_factory_data.cmake

@@ -116,6 +116,17 @@ if(CONFIG_CHIP_DEVICE_ENABLE_KEY)
 string(APPEND script_args "--enable-key \"${CONFIG_CHIP_DEVICE_ENABLE_KEY}\"\n")
 endif()
 
+# get code-partition factory_partition address
+dt_nodelabel(dts_partition_path NODELABEL "factory_partition")
+dt_reg_addr(factory_off PATH ${dts_partition_path})
+
+# get code-partition factory_partition size
+dt_nodelabel(dts_partition_path NODELABEL "factory_partition")
+dt_reg_size(factory_size PATH ${dts_partition_path})
+
+string(APPEND script_args "--offset ${factory_off}\n")
+string(APPEND script_args "--size ${factory_size}\n")
+
 string(APPEND script_args "--output \"${output_path}\"/factory\n")
 
 set(factory_data_bin ${output_path}/factory/factory_data.bin)

examples/air-quality-sensor-app/telink/CMakeLists.txt

@@ -31,13 +31,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/air-quality-sensor-app/telink/README.md

@@ -31,6 +31,13 @@ You can use this example as a reference for creating your own application.
     $ west build -b <build_target>
     ```
 
+    Also use key `-DFLASH_SIZE`, if your board has memory size different from 2
+    MB, for example, `-DFLASH_SIZE=1m` or `-DFLASH_SIZE=1m`:
+
+    ```bash
+    $ west build -b tlsr9518adk80d -- -DFLASH_SIZE=4m
+    ```
+
 4. Flash binary:
 
     ```
@@ -115,7 +122,7 @@ feature for another Telink example:
 
 After build application with enabled OTA feature, use next binary files:
 
--   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr.bin - main binary to flash PCB (Use at least 2MB PCB).
 -   zephyr-ota.bin - binary for OTA Provider
 
 All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have

examples/all-clusters-app/telink/CMakeLists.txt

@@ -32,13 +32,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/all-clusters-app/telink/Readme.md

@@ -33,6 +33,13 @@ creating your own application.
     $ west build -b <build_target>
     ```
 
+    Also use key `-DFLASH_SIZE`, if your board has memory size different from 2
+    MB, for example, `-DFLASH_SIZE=1m` or `-DFLASH_SIZE=1m`:
+
+    ```bash
+    $ west build -b tlsr9518adk80d -- -DFLASH_SIZE=4m
+    ```
+
 4. Flash binary:
 
     ```
@@ -117,7 +124,7 @@ feature for another Telink example:
 
 After build application with enabled OTA feature, use next binary files:
 
--   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr.bin - main binary to flash PCB (Use at least 2MB PCB).
 -   zephyr-ota.bin - binary for OTA Provider
 
 All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have

examples/all-clusters-minimal-app/telink/CMakeLists.txt

@@ -32,13 +32,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/all-clusters-minimal-app/telink/Readme.md

@@ -33,6 +33,13 @@ for creating your own application.
     $ west build -b <build_target>
     ```
 
+    Also use key `-DFLASH_SIZE`, if your board has memory size different from 2
+    MB, for example, `-DFLASH_SIZE=1m` or `-DFLASH_SIZE=1m`:
+
+    ```bash
+    $ west build -b tlsr9518adk80d -- -DFLASH_SIZE=4m
+    ```
+
 4. Flash binary:
 
     ```
@@ -100,7 +107,7 @@ feature for another Telink example:
 
 After build application with enabled OTA feature, use next binary files:
 
--   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr.bin - main binary to flash PCB (Use at least 2MB PCB).
 -   zephyr-ota.bin - binary for OTA Provider
 
 All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have

examples/bridge-app/telink/CMakeLists.txt

@@ -31,13 +31,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/bridge-app/telink/README.md

@@ -110,6 +110,13 @@ defined:
     $ west build -b <build_target>
     ```
 
+    Also use key `-DFLASH_SIZE`, if your board has memory size different from 2
+    MB, for example, `-DFLASH_SIZE=1m` or `-DFLASH_SIZE=1m`:
+
+    ```bash
+    $ west build -b tlsr9518adk80d -- -DFLASH_SIZE=4m
+    ```
+
 4. Flash binary:
 
     ```
@@ -262,7 +269,7 @@ feature for another Telink example:
 
 After build application with enabled OTA feature, use next binary files:
 
--   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr.bin - main binary to flash PCB (Use at least 2MB PCB).
 -   zephyr-ota.bin - binary for OTA Provider
 
 All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have

examples/chef/telink/CMakeLists.txt

@@ -38,13 +38,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/contact-sensor-app/telink/CMakeLists.txt

@@ -31,13 +31,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)

examples/contact-sensor-app/telink/README.md

@@ -31,6 +31,13 @@ You can use this example as a reference for creating your own application.
     $ west build -b <build_target>
     ```
 
+    Also use key `-DFLASH_SIZE`, if your board has memory size different from 2
+    MB, for example, `-DFLASH_SIZE=1m` or `-DFLASH_SIZE=1m`:
+
+    ```bash
+    $ west build -b tlsr9518adk80d -- -DFLASH_SIZE=4m
+    ```
+
 4. Flash binary:
 
     ```
@@ -119,7 +126,7 @@ feature for another Telink example:
 
 After build application with enabled OTA feature, use next binary files:
 
--   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr.bin - main binary to flash PCB (Use at least 2MB PCB).
 -   zephyr-ota.bin - binary for OTA Provider
 
 All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have

examples/light-switch-app/telink/CMakeLists.txt

@@ -31,13 +31,21 @@ else()
   unset(GLOBAL_DTC_OVERLAY_FILE)
 endif()
 
+if(EXISTS "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/${FLASH_SIZE}_flash.overlay")
+  message(STATUS "Flash memory size is set to: " ${FLASH_SIZE} "b")
+else()
+  set(FLASH_DTC_OVERLAY_FILE "${CHIP_ROOT}/src/platform/telink/2m_flash.overlay")
+  message(STATUS "Flash memory size is set to: 2mb")
+endif()
+
 if(DTC_OVERLAY_FILE)
   set(DTC_OVERLAY_FILE
-    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
+    "${DTC_OVERLAY_FILE} ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE}"
     CACHE STRING "" FORCE
   )
 else()
-  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
+  set(DTC_OVERLAY_FILE ${GLOBAL_DTC_OVERLAY_FILE} ${FLASH_DTC_OVERLAY_FILE} ${LOCAL_DTC_OVERLAY_FILE})
 endif()
 
 set(CONF_FILE prj.conf)