[pull] master from tasmota:master

docs/Commands.md

@@ -151,6 +151,7 @@ LedState<a class="cmnd" id="ledstate"></a>|Manage LED state<BR> `0` = disable us
 NoDelay<a class="cmnd" id="nodelay"></a>|Delay defined by `SetOption34` is omitted for any command in a backlog sequence following immediately after `NoDelay`<BR>_This must be used with care, and only for simple commands._ [Example](https://github.com/arendst/Tasmota/pull/9544)
 Power0<a class="cmnd" id="power0"></a>|Control the power state simultaneously for all power outputs on the device<BR> `0` / `off` = turn OFF <BR> `1` / `on` = turn ON <BR> `2` / `toggle` = if relay is `ON` switch to `OFF` and vice versa
 Power<x\><a class="cmnd" id="power"></a>|Control the corresponding power state (also restarts PulseTime)<x\><BR> `0` / `off` / `false` = turn OFF <BR> `1` / `on` / `true` = turn ON <BR> `2` / `toggle` = if power state is `ON` switch to `OFF` and vice versa<BR> `3` / `blink` = toggle power for [BlinkCount](#blinkcount) times each [BlinkTime](#blinktime) duration (at the end of `blink`, power state is returned to pre-blink state)<BR> `4` / `blinkoff` = stop blink sequence and return power state to pre-blink state
+TimedPower<x\><a class="cmnd" id="timedpower"></a>|Executes `Power<x> [ON\|1\|OFF\|0\|TOGGLE\|2\|BLINK\|3]` and after `<value>` milliseconds executes inverted action `Power<x> [OFF\|ON\|TOGGLE\|BLINK_OFF]`<BR>`<value>` should stick to 50ms granularity<BR>`TimedPower` to show remaining timers<BR>`TimedPower<x>` to clear timer for corresponding `<x>` relay
 PowerLock<x\><a class="cmnd" id="powerlock"></a>|Control to lock the current power state of a device and prevent further changes. Only `PowerOnState` and `Interlock` may change a device in locked state. '0' = unlocked (default) <BR> '1' = locked. Setting 'PowerLock0' locks/unlocks ALL devices
 PowerOnState<a class="cmnd" id="poweronstate"></a>|Control power state when the device is _**powered up**_. [More information](PowerOnState)<BR> `0` / `OFF` = keep power(s) OFF after power up <BR> `1` / `ON` = turn power(s) ON after power up <BR> `2` / `TOGGLE` = toggle power(s) from last saved state <BR> `3` = switch power(s) to their last saved state *(default)* <BR> `4` = turn power(s) ON and disable further power control <BR> `5` = after a `PulseTime` period turn power(s) ON (acts as inverted [`PulseTime`](Commands.md#pulsetime) mode)
 PulseTime<x\><a class="cmnd" id="pulsetime"></a>|Display the amount of `PulseTime` remaining on the corresponding Relay<x\>(x = `1..32`)<BR>`<value>` Set the duration to keep Relay<x\> `ON` when `Power<x> ON` command is issued. After this amount of time, the power will be turned `OFF`.<BR>`0` / `OFF` = disable use of PulseTime for Relay<x\><BR>`1..111` = set PulseTime for Relay<x\> in 0.1 second increments<BR>`112..64900` = set PulseTime for Relay<x\>, offset by 100, in 1 second increments. Add 100 to desired interval in seconds, e.g., `PulseTime 113` = 13 seconds and `PulseTime 460` = 6 minutes (i.e., 360 seconds)