JLink IP address setting from platformio.ini

[OptifySudarshanPatil]

Hello All,
What is correct configuration for setting up JLink IP address to avoid manually entering in this box?
(command prompt methos is jlink IP 192.168.0.1)

[84ace]

wow man, this was a real PITA to figure out.

Here is what i did:

in platformio.ini

upload_protocol = custom
extra_scripts = extra_script.py

in extra_script.py:

from os import makedirs
from os.path import isdir, join
Import('env')

def _jlink_cmd_script(env, source):
    build_dir = env.subst("$BUILD_DIR")
    if not isdir(build_dir):
        makedirs(build_dir)
    script_path = join(build_dir, "upload.jlink")
    commands = ["h", "loadbin %s,0x0" % source, "r", "q"]
    with open(script_path, "w") as fp:
        fp.write("\n".join(commands))
    return script_path

env.Replace(
    __jlink_cmd_script=_jlink_cmd_script,
    UPLOADER="/Applications/SEGGER/JLink_V766a/JLinkExe",
    UPLOADERFLAGS=[
        "ip", "192.168.68.102",
        "-device", "NRF52840_XXAA",
        "-speed", "auto",
        "-if", "swd",
        "-autoconnect", "1"
    ],
    UPLOADCMD='"$UPLOADER" $UPLOADERFLAGS -CommanderScript ${__jlink_cmd_script(__env__, SOURCE)}'
)

I hope that helps!
-Acea

[OptifySudarshanPatil]

Hi @84ace
Thanks for your replay!
My intention was to change jlink from "USB" to local network PC ip address where Jlink is connected to device.
This extra_script.py have some strange error in my system 😅

debug_tool = custom
debug_port = 192.168.1.101
debug_server =
$PLATFORMIO_CORE_DIR/packages/tool-jlink/JLink.exe
-singlerun
-if
JTAG
-select
IP 192.168.1.101
-port
2331
-device
ATSAM3X8E

debug_init_cmds =
define pio_reset_halt_target
monitor reset
monitor halt
end
define pio_reset_run_target
monitor clrbp
monitor reset
monitor go
end
target extended-remote $DEBUG_PORT
monitor clrbp
monitor speed auto
pio_reset_halt_target
$LOAD_CMDS
$INIT_BREAK

[OptifySudarshanPatil]

Hi @ivankravets ,
Is is possible to connect local network PC ip address where jlink is connected to hardware with jlink remote server is running from devleopment system platformio.ini?
i dig a lot in platformio-core but no luck where to mention IP address to simulate command like
jlink IP 192.168.1.101
Referance link of segger Here