GNSS : Galiléo ?

[Pijos]

The GNSS module L76-L is compatible with GPS, GLONASS, Galileo and Q-SS. But I only see GPS and Glonass satellites on my receiver?

[marcelrv]

I have the same experience.
On my phone i can see many Galileo satellites, do they are in the visible area.

Does Galileo require different antenna?

[marcelrv]

Though the spec of GNSS L76-L indicates Galileo in the nmea spec L76-LB/L26-LB/LC86L is capable of accessing GPS, BeiDou and GLONASS systems.

The nmea manual has

Either of the 
following three options are supported: 
 GPS only 
 GPS + GLONASS
 GPS + BeiDou

No mention of Galileo.
Confusing....

[peterantypas]

I think I’m going to start looking for a new module in this form factor. Any suggestions?Sent from my iPhoneOn Jul 23, 2024, at 5:59 AM, Marcel ***@***.***> wrote: Though the spec of GNSS L76-L indicates Galileo in the nmea spec L76-LB/L26-LB/LC86L is capable of accessing GPS, BeiDou and GLONASS systems. The nmea manual has Either of the following three options are supported:  GPS only  GPS + GLONASS  GPS + BeiDou No mention of Galileo. Confusing.... —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[hecko]

I think I’m going to start looking for a new module in this form factor. Any suggestions?Sent from my iPhoneOn Jul 23, 2024, at 5:59 AM, Marcel @.> wrote: Though the spec of GNSS L76-L indicates Galileo in the nmea spec L76-LB/L26-LB/LC86L is capable of accessing GPS, BeiDou and GLONASS systems. The nmea manual has Either of the following three options are supported:  GPS only  GPS + GLONASS  GPS + BeiDou No mention of Galileo. Confusing.... —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.>

uBlox has a very good reputation in EU.

[marcelrv]

I think I know the answer . But asking anyway...
Does the firmware allow to pass commands to the gnss module?

This link suggest gallieo is available.. maybe it not well documented. If somehow I can pass through commands I can give it a try.

https://forums.quectel.com/t/l76-backup-mode/16709/4

https://forums.quectel.com/t/l76-gnss-search-mode-problem/10126

[peterantypas]

No, it's not and there are no GPIOs left to wire it either. The design will have to change.

…

On Tue, Jul 23, 2024 at 7:49 AM Marcel ***@***.***> wrote: I think I know the answer . But asking anyway... Does the firmware allow to pass commands to the gnss module? This link suggest gallieo is available.. maybe it not well documented. If somehow I can pass through commands I can give it a try. https://forums.quectel.com/t/l76-gnss-search-mode-problem/10126 — Reply to this email directly, view it on GitHub <#130 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAL6J3KVF7CO5LBU6CNCDHDZNZUN5AVCNFSM6AAAAABLKG5E6GVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJSG43TOMA> . You are receiving this because you commented.Message ID: ***@***.***>