Fix PRdoc that have been previously drafted with older schema

prdoc/pr_1178.prdoc

@@ -6,9 +6,9 @@ doc:
       Changed approval-voting, approval-distribution to send all messages tranche0 assignments in one message.
       This required:
       * A new parachains_db version.
-      * A new validation protocol to support the new message types. 
+      * A new validation protocol to support the new message types.
       The new logic will be disabled and will be enabled at a later date after all validators have upgraded.
-   
+
 migrations:
   db:
     - name: Parachains database change from v3 to v4.
@@ -18,6 +18,5 @@ migrations:
 
 crates:
   - name: "polkadot"
-    semver: patch
 
 host_functions: []

prdoc/pr_1246.prdoc

@@ -1,17 +1,17 @@
 title: Use the `Message Queue` Pallet for DMP and XCMP dispatch queueing
 
 doc:
-  - audience: Parachain Dev
+  - audience: Runtime Dev
     description: Replaces the queueing capabilities of the `DMP and `XCMP-Queue` pallet for incoming messages with the `MessageQueue` pallet. This simplifies the code and improves security.
 
 migrations:
   runtime:
     -
-      pallet: "cumulus_pallet_dmp_queue"
+      reference: cumulus_pallet_dmp_queue
       description: "Messages from the DMP dispatch queue will be moved over to the MQ pallet via `on_initialize`. This happens over multiple blocks and emits a `Completed` event at the end. The pallet can be un-deployed and deleted afterwards. Note that the migration reverses the order of messages, which should be acceptable as a one-off."
 
 crates:
-  - name: "cumulus_pallet_xcmp_queue"
+  - name: cumulus_pallet_xcmp_queue
     note: Pallet config must be altered according to the MR description.
 
 host_functions: []

prdoc/pr_1289.prdoc

@@ -4,25 +4,26 @@
 title: Supporting paged rewards allowing all nominators to be rewarded
 
 doc:
-  - audience: Validator
+  - audience: Node Operator
     description: |
       We used to clip top `MaxNominatorRewardedPerValidator` nominators by stake that are eligible for staking reward.
       This was done to limit computation cost of paying out rewards. This PR introduces paging to reward payouts,
       meaning we still clip nominators upto MaxExposurePageSize per page and there could be multiple pages of rewards to
       be paid out. Validators get commission pro-rata to the amount of reward that is paid out for the page.
 
-    notes:
-      - payout_stakers should be called multiple times, once for each page of nominators.
-      - payout_stakers_by_page can be used to pay out rewards for a specific page.
-      - Some old non-paged era storage items are deprecated, and can be removed in a future upgrade.
+      notes:
+        - payout_stakers should be called multiple times, once for each page of nominators.
+        - payout_stakers_by_page can be used to pay out rewards for a specific page.
+        - Some old non-paged era storage items are deprecated, and can be removed in a future upgrade.
 
 migrations:
   db: []
 
   runtime:
-    - { pallet: "pallet-staking", description: "v14: Migration of era exposure storage items to paged exposures."}
+    - reference: pallet-staking
+      description: "v14: Migration of era exposure storage items to paged exposures."
 
 crates:
   - name: pallet-staking
 
-host_functions: []
+host_functions: []

prdoc/pr_1805.prdoc

@@ -1,7 +1,7 @@
 title: Introduce state decoding check after runtime upgrades.
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime Dev
     description: |
       Adds a check to the try-runtime logic that will verify that all pallet on-chain storage still decodes. This can help to spot missing migrations before they become a problem. The check is enabled as soon as the `--checks` option of the `try-runtime` CLI is not `None`.
 
@@ -10,10 +10,8 @@ migrations:
 
   runtime: []
 
-crates: 
+crates:
   - name: frame-support
-    semver: minor
   - name: frame-support-procedural
-    semver: minor
 
 host_functions: []

prdoc/pr_1926.prdoc

@@ -1,10 +1,10 @@
 title: Adds syntax for marking calls feeless
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime Dev
     description: |
       1. Adds an attribute `#[pallet::feeless_if]` that can be optionally attached to a `pallet::call`.
-      2. Adds a signed extension SkipCheckIfFeeless<T: SignedExtension> that wraps a transaction 
+      2. Adds a signed extension SkipCheckIfFeeless<T: SignedExtension> that wraps a transaction
       payment processor to potentially skip payment fees for such calls.
       Note that both the attribute and the signed extension are needed to make the call feeless.
 
@@ -14,17 +14,11 @@ migrations:
   runtime: []
 
 crates:
-  - name: "frame-support-procedural"
-    semver: minor
-  - name: "pallet-skip-feeless-payment"
-    semver: major
-  - pallet-example-kitchensink
-    semver: patch
-  - kitchensink-runtime
-    semver: major
-  - node-testing
-    semver: patch
-  - node-cli
-    semver: patch
+  - name: frame-support-procedural
+  - name: pallet-skip-feeless-payment
+  - name: pallet-example-kitchensink
+  - name: kitchensink-runtime
+  - name: node-testing
+  - name: node-cli
 
 host_functions: []

prdoc/pr_2086.prdoc

@@ -1,15 +1,12 @@
 title: "Contracts: Add XCM traits to interface with contracts"
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime Dev
     description: |
       We are introducing a new set of `XcmController` traits in `pallet-xcm`.
-      These traits extract functionality from `pallet-xcm` and provide high-level interaction with XCM. 
+      These traits extract functionality from `pallet-xcm` and provide high-level interaction with XCM.
       They enable other pallets, like `pallet_contracts`, to rely on these traits instead of tight coupling to `pallet-xcm` itself.
 
 crates:
-    - name: "pallet-xcm"
-      semver: patch
-    - name: "xcm-executor"
-      semver: patch
-
+  - name: pallet-xcm
+  - name: xcm-executor

prdoc/pr_2107.prdoc

@@ -4,14 +4,16 @@
 title: Add a builder pattern to create XCM programs
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime Dev
     description: |
       XCMs can now be built using a builder pattern like so:
+      ```
       Xcm::builder()
         .withdraw_asset(assets)
         .buy_execution(fees, weight_limit)
         .deposit_asset(assets, beneficiary)
         .build();
+      ```
 
 migrations:
   db: []

prdoc/pr_2142.prdoc

@@ -1,12 +1,12 @@
 title: Cleanup XCMP `QueueConfigData`
 
 doc:
-  - audience: Parachain Dev
+  - audience: Runtime Dev
     description: Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults.
 
 migrations:
   runtime:
-    - pallet: "cumulus_pallet_xcmp_queue"
+    - reference: cumulus_pallet_xcmp_queue
       description: "v4: Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults."
 
 crates: []

prdoc/pr_2165.prdoc

@@ -1,7 +1,7 @@
-title: Add sudo::remove_key
+title: Add `sudo::remove_key`
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime User
     description: |
       Pallet `Sudo` now has the ability to remove the sudo key via `remove_key`. This is a less-invasive way of rendering the sudo pallet useless without needing a code upgrade.
 
@@ -12,6 +12,5 @@ migrations:
 
 crates:
   - name: pallet-sudo
-    semver: minor
 
 host_functions: []

prdoc/pr_2253.prdoc

@@ -4,7 +4,7 @@
 title: Different builder pattern constructors for XCM
 
 doc:
-  - audience: Core Dev
+  - audience: Runtime Dev
     description: |
       The `builder()` constructor for XCM programs now only allows building messages that pay for fees,
       i.e. messages that would pass the `AllowTopLevelPaidExecutionFrom` barrier.

substrate/client/authority-discovery/Cargo.toml

@@ -23,8 +23,8 @@ futures-timer = "3.0.1"
 ip_network = "0.4.1"
 libp2p = { version = "0.51.3", features = ["ed25519", "kad"] }
 multihash = { version = "0.18.1", default-features = false, features = [
-  "sha2",
-  "std",
+	"sha2",
+	"std",
 ] }
 log = "0.4.17"
 prost = "0.11"
@@ -41,9 +41,9 @@ sp-keystore = { path = "../../primitives/keystore" }
 sp-runtime = { path = "../../primitives/runtime" }
 async-trait = "0.1.56"
 multihash-codetable = { version = "0.1.1", features = [
-  "serde",
-  "sha2",
-  "digest",
+	"digest",
+	"serde",
+	"sha2",
 ] }
 
 [dev-dependencies]