Clicking on the menu Stoppuhr leads to the function time measurement with start and stop signals.
Sensor 1 = Start signal
Sensor 2 = Stop signal
All measurements over middle range are marked blue.
The button Referenz saves the current measurement as a reference. It will show the diference for the following meassurements.
Needed adapter type A
Time measurements for slave cylinders (Absenkstationen)
All measurements over middle range are marked blue.
Needed adapter type A
Speed measurement for machines with internal tact sensors.
Needed adapter type ?
Speed measurment with light barrier on the outlet side of the sorter.
Only values with a minimum of 50% of the highest value are taken into consideration. All values under the median are marked red.
Light barrier type: [= o ] Light sensor with reflection [- o -] Light barrier
Needed adapter type B
Clicking on the menu Analoganzeige leads to the function "read analog input". Clicking the following options will show you the current measurement form 4-20mA.
| Option | Range | Adapter type |
|---|---|---|
| Pressure measurement | 10bar, 20bar, 40bar, 50bar, 100bar | Type C |
| Temperature measurement | 100°C, 150°C, 350°C | Type C |
| Flow measurement | 2500 Nl/min | Type F |
"Set 0" will set the current value back to 4mA.
The function Berechnung is used for calculating a flow measurement.
The function Graphik will draw a graph with the current selected sensor measurements. The time frame can be selected.
The function Export can be used after a completed measurement of a graph. It will export all measurements in to a text file on the SD card. The values get directly imported to an excel file with a graph. Pushing the button Export deletes the previous file and creates a new one.
Signal test of sensors.
Needed adapter type U
Displays the south pole / north pole of a magnet
The sensor is built-in to the side of the PAM3000. The magnet gets detected inside of the circle area.
Displays speed of the adapter.
- Press Start button
- Hold the speed sensor wheel on the surface you want to measure
- Speed is displayed in m/min
The function Referenz saves the current speed. The next meassurement at 50Hz displays the needed frequency adjustment.
Needed adapter type V
Adjustments to time/date, I2C-scanner and the buzzer volume
Measures the distance between 30-1000mm with an accuracy of 1mm.
Needed adapter type D
Shows current inclination of the Sensor.
Needed adapter type N
Counting function with master counter
Plays selected music playlist in the background.
Adapter type A: Adapter with two PE-converters for pneumatic measurements.
Adapter type B: Adapter for two matrix light barriers.
Adapter type C: Adapter for analog signal 0-20mA.
Adapter type D: Adapter for distance measurement 30-1000mm.
Adapter type F: Adapter for flow measurement with ifm SD9000 sensor.
Adapter type N: Adapter to align machines.
Adapter type U: Universal clamp adapter.
Adapter type V: Adapter to measure speed.
Adapter type Y: Adapter with the possibility to combine different adapters.
Adapter type I2C: Adapter to connect I2C sensors externaly.
Adapter type Klemmen: Universal terminal adapter
Messadapter: To measure the values on the adapters with an external meter
- Touch-Panel Gen-uLCD-50DCT-CLB-SB-AR from 4D Systems
- Arduino Board Due 32-Bit from Arduino CC
- Grove Base Shield V2.0 for Arduino from Seeed
-
Download and install the open-source Arduino Software (IDE) from arduino.cc in version
1.8.*. -
Clone this project with
git clone https://github.com/pamasol/PAM3000-Sensor-Visualizer.gitand open thePAM3000-Sensor-Visualizer.inofile with the Arduino IDE. -
Update Arduino IDE settings according to the Wiki page Arduino IDE Setup.
- Download and install the Windows software Workshop4 from 4dsystems.com.au/workshop4.
- Arduino language reference
- Arduino Adaptor Shield Datasheet
- 4D Systems 5" Display Datasheet
- DIABLO16 Embedded Graphics Processor Serial Command Reference
https://www.youtube.com/watch?time_continue=70&v=L1TPs6dI11k&feature=emb_title