Skip to content

25.12 Luci cant adjust now tx power on wifi for some unknown reason #8177

@tojestzart

Description

@tojestzart

Is there an existing issue for this?

  • I have searched among all existing issues (including closed issues)

screenshots or captures

I have very close laptop to router so i dont need any TX power. it worked on 23, 24 series now is broken.

Image
uci set wireless.radio1.txpower='0'

Actual behaviour

transmiting 23 dbm instead of 0

Expected behaviour

It should transmit minimal possible tx power which is builtin in chip

Steps to reproduce

install release candidate

Additional Information

GL.iNet GL-A1300

root@GL-A1300:~# cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='25.12.0-rc1'
DISTRIB_REVISION='r32353-9e9b05130c'
DISTRIB_TARGET='ipq40xx/generic'
DISTRIB_ARCH='arm_cortex-a7_neon-vfpv4'
DISTRIB_DESCRIPTION='OpenWrt 25.12.0-rc1 r32353-9e9b05130c'
DISTRIB_TAINTS=''
root@GL-A1300:~# 
root@GL-A1300:~#

What browsers do you see the problem on?

No response

Relevant log output

root@GL-A1300:~# iw dev phy1-ap0 info
Interface phy1-ap0
        ifindex 7
        wdev 0x100000001
        addr 94:83:c4:62:fb:b6
        ssid XXX_5G
        type AP
        wiphy 1
        channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz
        txpower 23.00 dBm
        multicast TXQ:
                qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes        tx-packets
                0       0       706     15      0       0       0       917411          1058
root@GL-A1300:~# 
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Set MLD config: [ ]
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Reload all interfaces
[26 gru 2025, 23:11:27 CET] daemon.notice: wpa_supplicant[1529]: Set MLD config: [ ]
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Reloaded settings for phy phy1
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Set MLD config: [ ]
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Reload all interfaces
[26 gru 2025, 23:11:27 CET] daemon.notice: wpa_supplicant[1529]: Set MLD config: [ ]
[26 gru 2025, 23:11:27 CET] daemon.notice: netifd: radio1 (4936): wifi-scripts: Starting
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Reloaded settings for phy phy1
[26 gru 2025, 23:11:27 CET] daemon.notice: netifd: radio1 (4936): command failed: Not supported (-95)
[26 gru 2025, 23:11:27 CET] daemon.notice: netifd: radio1 (4936): command failed: Not supported (-95)
[26 gru 2025, 23:11:27 CET] daemon.notice: wpa_supplicant[1529]: Set new config for phy phy1
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
[26 gru 2025, 23:11:27 CET] daemon.notice: hostapd: Reloaded settings for phy phy1
[26 gru 2025, 23:11:27 CET] daemon.notice: netifd: radio1 (4936): wifi-scripts: Configuring 'phy1' txantenna: 4294967295, rxantenna: 4294967295 distance: 0
[26 gru 2025, 23:11:27 CET] daemon.notice: netifd: radio1 (4936): wifi-scripts: Preparing interface: phy1-ap0 with MAC: 94:83:c4:62:fb:b6
[26 gru 2025, 23:11:27 CET] daemon.notice: wpa_supplicant[1529]: Start pending MLD interfaces
[26 gru 2025, 23:11:30 CET] daemon.info: dnsmasq[1]: read /etc/hosts - 12 names
[26 gru 2025, 23:11:30 CET] daemon.info: dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions