Skip to content

openss7/pbbr

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

82 Commits
 
 
 
 
 
 

Repository files navigation

PBBR (Provider Backbone Bridge)

This package is an implementation of Provider Backbone Bridging (PBB) as specified in IEEE 802.1ah and IEEE 802.1Q (2011) (both now part of IEEE 802.1Q-2018). It provides a separate 'bridge' device for the Linux Kernel that can act as a PBB-BEB and/or PBB-TE backbone bridge. It also implements IEEE 802.1aq-2012 (SPB) and IEEE 802.1Qbp-2014 (ECMP) (both now part of IEEE 802.1Q-2018).

Objectives

The objective of PBBR is to create a bridge device for Linux that provides an SPBM ECMP Level-1/Level-2 bridge for the Linux kernel. The primary uses are as follows:

  1. Using the Linux Kernel as a PBB-TE provider-bridge (Level-2 Intermediate System).

In the provider-bridge role, the bridge acts as a PBB-TE bridge for adding PBB participating nodes into the backbone network, or to interconnect clouds using WAN interfaces as PBB provider ports.

  1. Using QEMU/KVM for virtualization of network interface devices.

In the virtualization role, the bridge acts as a PBB-BEB bridge that enslaves host network interfaces as provider ports and TAP devices for virtio as customer ports. This enables automatic full-mesh resilient network connections for virtualized networks in the cloud. My primary purpose is for enabling resilient networking for NFVI.

PBBR is intended to replace Open vSwitch for full-mesh networking between VNF instances in NFVI.

Advantages

The advantages of the PBB approach are as follows:

  • Resilience
  • Security
  • Migration
  • Virtual Instance Identification
  • Performance
  • Management
  • Service Assurance

These advantages are detailed in the sections that follow:

Resilience

All other existing approaches in the Linux kernel utilize STP for bridging. Various forms of STP have resilience issues and provide for the possibility of back holes or significant network degradation dues to broadcast/multicast loops.

SPB (Shortest Path Bridging) using the IS-IS link-state protocol is far more resilient to network component and path outages than is STP and MSTP, and exhibits faster convergence than STP. ECMP (Equal Cost Multiple Path) and flow filtering (F-TAG) can also be optionally activated for efficient load-sharing. When tun/tap ports are utilized on a BEB bridge in the host system, there is no longer a need for "learning" customer MACs on these virtio ports. This means that network convergence is faster, for both startup and shutdown of virtio NIC instances.

Security

Other approaches are normal br and tap, macvtap, gretap, and vxlan. (The macvtap in bridge mode is similar to the br and tap approach, however, setup is easier.) The problem with bridge- or vepa-mode approaches is that any virtual mac interface can send packets to any other mac in the cloud, with the attendant security ramifications. gre and vxlan tunnels achieve the separation between clients necessary for security, but are quite complex in implementation which leads to other possible security exposure.

On the other hand, PBB approaches achieve fully transparent separation between clients (using service identifier) without complex configuration.

Migration

Some approaches using Open vSwitch allow for migration of VM images between hosts. However, they require complex coordination between vSwitch instances and do not exhibit fast convergence.

Utilizing the IS-IS SPBM protocol and short-circuiting "learning" at the customer port, it is possible to achieve migration change-over times consistent with the underlying convergence of the SPB protocol. This can easily achieve migration times of less than 100 milliseconds at scale, or faster on high performance hosts. It is also possible to have VNFs able to perform C-MAC take-over that will also converge in the same interval and with minimal disruption of layer-3 traffic.

Utilizing a tun/tap virtio interface to a PBB backbone edge bridge internal to the Linux kernel precludes the need for "learning" of customer MACs. IS-IS (SPBM) ES updates can be performed as soon as the customer tun/tap interface is brought up or when it is closed. Migration of customer MACs to another host is handled quickly and automatically. Because each BEB has a full network view of the entire customer networks, it is also possible to detect customer MAC conflicts at the time that the tun/tap interface is configured.

Allowing a VM guest to add or remove MACs from the virtio interface can permit for MAC take-over to enable fault-tolerance of VNFs.

Virtual Instance Identification

Utilizing Open vSwitch and similar approaches, it is difficult to identify VM guest instances. Utilizing PBB, VM guest instances can be identified by a primary SID (service identifier) and C-MAC (customer MAC) combination. It is possible to identify the location of particular VM guest instance by hooking into the IS-IS SPBM protocol or by utilizing C-LAN approaches such as LLDP.

Port Aggregation

Port aggregation utilizing the macvtap approach relies on coordination between the host and external bridges. Port aggregation with GRE and VxLAN approaches is complex and inefficient.

Utilizing SPBM, ECF and ECMP at the BEB in the host achieves port aggregation and load balancing that is completely transparent to non-participating backbone bridges.

Full Mesh

Full mesh networking can be achieved using macvtap approaches; however, it comes with attendant security issues. Full mesh can be achieved utilizing GRE or VxLAN tunnels without the attendant security risks of bridge-mode approaches; however, there are attendant performance, resilience and management complexity associated with these approaches.

PBB achieves full mesh networking with resilience, performance and security, and provides single-point provisioning for greatly reduced complexity.

Traffic Engineering

Traffic engineering with PBB utilizes traditional models, both at the backbone level and at the service instance level. Standard link traffic control can be managed both for backbone traffic as well as for service instance traffic.

Traffic control utilizing standard Linux host approaches is difficult when using GRE or VxLAN tunnels.

Monitoring

Monitoring of failures with PBB utilizes traditional and standard approaches. On the other hand, GRE tunnels, VxLAN and Open vSwitch approaches make failure monitoring difficult.

Furthermore, as IS-IS is a link-state protocol that provides an entire network view at each IS-IS node, it is possible to determine the total state of the network by simply having a management station participate in the IS-IS protocol.

Data Path Performance

Bridge-mode approaches have good data path performance (as good as a Linux kernel bridge). GRE and VxLAN approaches have the data path performance hit of additional encapsulation and the use of the Layer-3 or 4 stack, as well as the performance hit of an internal socket interface to the Layer-3 or 4 stack.

PBB-BEB is a bridge and can achieve the same data path performance as any other Linux kernel bridge. STREAMS implementation can achieve performance gains above and beyond that of the native Linux kernel bridges due to instruction cache bursting.

Implementation

The Linux kernel native implementation consists of the following elements:

  1. An implementation of a customer port.

A customer port (C-VLAN) is similar to a VLAN virtual port (in fact is more similar to a VLAN in VLAN virtual port), except that, instead of being instantiated based on VID, it is based on SID. The SID is a 24-bit service instance identifier, that identifies the customer network associated with the customer port. The lower interface acts as a provider port; the upper interface, a customer port. The basic kernel VLAN implementation is extended to add a new virtual interface type for the customer port. Just as with VLAN virtual interfaces, the MAC address is shared with the provider port.

  1. An implementation of the SPBM (IS-IS).

For a customer port, the SPBM protocol is associated with the lower provider port under the customer port. The MAC address of the provider port acts as a NET (Network Entity Title) for a Level-1/2 intermediate system in the IS-IS SPBM protocol. This network entity acts as a BEB (backbone edge bridge). All BEBs participate in the IS-IS SPBM protocol.

The upper customer port acts as a normal Ethernet link and participates in the STP protocol when combined with a normal customer bridge (a normal br bridge in the Linux kernel).

  1. An implementation of a pbbclan driver.

The pbbclan driver is similar to the macvlan driver in that it combines a virtual interface with a bridge over a customer port lower device. In fact, it may be possible to simply modify the macvlan driver for direct use over C-VLAN ports. The initial implementation of the pbbclan driver will be modelled after the macvlan driver in an attempt to integrate the two in the end.

  1. An implementation of a pbbctap driver.

The pcbctap driver is similar to the macvtap driver in that it combines a tun/tap interface with a bridge over a customer port lower device. In fact, it may be possible to simply modify the macvtap driver for direct use of C-VLAN ports. The initial implementation of the pbbctap driver will be modelled after the macvtap driver in an attempt to integrate to two in the end.

  1. An implementation of a beb bridge driver.

The beb driver is similar to a br driver. The major difference in setting up a beb bridge, is that the provider and customer ports must be distinguished when enslaving them.

  1. Possibly an implementation of a pbb-te bridge.

The major difference between a beb bridge and a pbb-te bridge is the later provides S-TAG aware bridging between separate provider backbone networks. Because a pbb-te bridge is not really necessary to achieve virtualization, it will likely be skipped for now.

About

Provider Backbone Bridging for Linux

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages