Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

Documentation/ABI/testing/sysfs-driver-ufs

@@ -995,6 +995,132 @@ Description:	This entry shows the target state of an UFS UIC link
 
 		The file is read only.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the status of performance monitor enablement
+		and it can be used to start/stop the monitor. When the monitor
+		is stopped, the performance data collected is also cleared.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file tells the monitor to focus on requests transferring
+		data of specific chunk size (in Bytes). 0 means any chunk size.
+		It can only be changed when monitor is disabled.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many sectors (in 512 Bytes) have been
+		sent from device to host after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how long (in micro seconds) has been spent
+		sending data from device to host after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many read requests have been sent after
+		monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the maximum latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the minimum latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the average latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the total latency (in micro seconds) of
+		read requests sent after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many sectors (in 512 Bytes) have been sent
+		from host to device after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how long (in micro seconds) has been spent
+		sending data from host to device after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many write requests have been sent after
+		monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the maximum latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the minimum latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the average latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the total latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>

Documentation/scsi/scsi_mid_low_api.rst

@@ -1172,10 +1172,9 @@ Members of interest:
                    of 0 implies a successfully completed command (and all
                    data (if any) has been transferred to or from the SCSI
                    target device). 'result' is a 32 bit unsigned integer that
-                   can be viewed as 4 related bytes. The SCSI status value is
-                   in the LSB. See include/scsi/scsi.h status_byte(),
-                   msg_byte(), host_byte() and driver_byte() macros and
-                   related constants.
+                   can be viewed as 2 related bytes. The SCSI status value is
+                   in the LSB. See include/scsi/scsi.h status_byte() and
+                   host_byte() macros and related constants.
     sense_buffer
 		 - an array (maximum size: SCSI_SENSE_BUFFERSIZE bytes) that
                    should be written when the SCSI status (LSB of 'result')

MAINTAINERS

@@ -6800,6 +6800,15 @@ S:	Supported
 W:	http://www.broadcom.com
 F:	drivers/scsi/lpfc/
 
+EMULEX/BROADCOM EFCT FC/FCOE SCSI TARGET DRIVER
+M:	James Smart <james.smart@broadcom.com>
+M:	Ram Vegesna <ram.vegesna@broadcom.com>
+L:	linux-scsi@vger.kernel.org
+L:	target-devel@vger.kernel.org
+S:	Supported
+W:	http://www.broadcom.com
+F:	drivers/scsi/elx/
+
 ENE CB710 FLASH CARD READER DRIVER
 M:	Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:	Maintained

block/Kconfig

@@ -151,6 +151,15 @@ config BLK_CGROUP_IOLATENCY
 
 	Note, this is an experimental interface and could be changed someday.
 
+config BLK_CGROUP_FC_APPID
+	bool "Enable support to track FC I/O Traffic across cgroup applications"
+	depends on BLK_CGROUP=y
+	help
+	  Enabling this option enables the support to track FC I/O traffic across
+	  cgroup applications. It enables the Fabric and the storage targets to
+	  identify, monitor, and handle FC traffic based on VM tags by inserting
+	  application specific identification into the FC frame.
+
 config BLK_CGROUP_IOCOST
 	bool "Enable support for cost model based cgroup IO controller"
 	depends on BLK_CGROUP=y

block/bsg-lib.c

@@ -84,7 +84,7 @@ static int bsg_transport_complete_rq(struct request *rq, struct sg_io_v4 *hdr)
 	 */
 	hdr->device_status = job->result & 0xff;
 	hdr->transport_status = host_byte(job->result);
-	hdr->driver_status = driver_byte(job->result);
+	hdr->driver_status = 0;
 	hdr->info = 0;
 	if (hdr->device_status || hdr->transport_status || hdr->driver_status)
 		hdr->info |= SG_INFO_CHECK;

block/bsg.c

@@ -96,7 +96,9 @@ static int bsg_scsi_complete_rq(struct request *rq, struct sg_io_v4 *hdr)
 	 */
 	hdr->device_status = sreq->result & 0xff;
 	hdr->transport_status = host_byte(sreq->result);
-	hdr->driver_status = driver_byte(sreq->result);
+	hdr->driver_status = 0;
+	if (scsi_status_is_check_condition(sreq->result))
+		hdr->driver_status = DRIVER_SENSE;
 	hdr->info = 0;
 	if (hdr->device_status || hdr->transport_status || hdr->driver_status)
 		hdr->info |= SG_INFO_CHECK;

block/scsi_ioctl.c

@@ -254,9 +254,11 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
 	 */
 	hdr->status = req->result & 0xff;
 	hdr->masked_status = status_byte(req->result);
-	hdr->msg_status = msg_byte(req->result);
+	hdr->msg_status = COMMAND_COMPLETE;
 	hdr->host_status = host_byte(req->result);
-	hdr->driver_status = driver_byte(req->result);
+	hdr->driver_status = 0;
+	if (scsi_status_is_check_condition(hdr->status))
+		hdr->driver_status = DRIVER_SENSE;
 	hdr->info = 0;
 	if (hdr->masked_status || hdr->host_status || hdr->driver_status)
 		hdr->info |= SG_INFO_CHECK;
@@ -484,9 +486,10 @@ int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
 		break;
 	}
 
-	if (bytes && blk_rq_map_kern(q, rq, buffer, bytes, GFP_NOIO)) {
-		err = DRIVER_ERROR << 24;
-		goto error;
+	if (bytes) {
+		err = blk_rq_map_kern(q, rq, buffer, bytes, GFP_NOIO);
+		if (err)
+			goto error;
 	}
 
 	blk_execute_rq(disk, rq, 0);

drivers/ata/libata-scsi.c

@@ -196,9 +196,7 @@ void ata_scsi_set_sense(struct ata_device *dev, struct scsi_cmnd *cmd,
 	if (!cmd)
 		return;
 
-	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
-
-	scsi_build_sense_buffer(d_sense, cmd->sense_buffer, sk, asc, ascq);
+	scsi_build_sense(cmd, d_sense, sk, asc, ascq);
 }
 
 void ata_scsi_set_sense_information(struct ata_device *dev,
@@ -409,13 +407,16 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 	cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
 				  sensebuf, &sshdr, (10*HZ), 5, 0, 0, NULL);
 
-	if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+	if (cmd_result < 0) {
+		rc = cmd_result;
+		goto error;
+	}
+	if (scsi_sense_valid(&sshdr)) {/* sense data available */
 		u8 *desc = sensebuf + 8;
-		cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
 
 		/* If we set cc then ATA pass-through will cause a
 		 * check condition even if no error. Filter that. */
-		if (cmd_result & SAM_STAT_CHECK_CONDITION) {
+		if (scsi_status_is_check_condition(cmd_result)) {
 			if (sshdr.sense_key == RECOVERED_ERROR &&
 			    sshdr.asc == 0 && sshdr.ascq == 0x1d)
 				cmd_result &= ~SAM_STAT_CHECK_CONDITION;
@@ -490,9 +491,12 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
 	cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
 				sensebuf, &sshdr, (10*HZ), 5, 0, 0, NULL);
 
-	if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
+	if (cmd_result < 0) {
+		rc = cmd_result;
+		goto error;
+	}
+	if (scsi_sense_valid(&sshdr)) {/* sense data available */
 		u8 *desc = sensebuf + 8;
-		cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
 
 		/* If we set cc then ATA pass-through will cause a
 		 * check condition even if no error. Filter that. */
@@ -638,7 +642,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
 		if (cmd->request->rq_flags & RQF_QUIET)
 			qc->flags |= ATA_QCFLAG_QUIET;
 	} else {
-		cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
+		cmd->result = (DID_OK << 16) | SAM_STAT_TASK_SET_FULL;
 		cmd->scsi_done(cmd);
 	}
 
@@ -858,8 +862,6 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 
 	memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
 
-	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
-
 	/*
 	 * Use ata_to_sense_error() to map status register bits
 	 * onto sense key, asc & ascq.
@@ -874,8 +876,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 		 * ATA PASS-THROUGH INFORMATION AVAILABLE
 		 * Always in descriptor format sense.
 		 */
-		scsi_build_sense_buffer(1, cmd->sense_buffer,
-					RECOVERED_ERROR, 0, 0x1D);
+		scsi_build_sense(cmd, 1, RECOVERED_ERROR, 0, 0x1D);
 	}
 
 	if ((cmd->sense_buffer[0] & 0x7f) >= 0x72) {
@@ -957,8 +958,6 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
 
 	memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
 
-	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
-
 	if (ata_dev_disabled(dev)) {
 		/* Device disabled after error recovery */
 		/* LOGICAL UNIT NOT READY, HARD RESET REQUIRED */
@@ -4196,7 +4195,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 
 	case REQUEST_SENSE:
 		ata_scsi_set_sense(dev, cmd, 0, 0, 0);
-		cmd->result = (DRIVER_SENSE << 24);
 		break;
 
 	/* if we reach this, then writeback caching is disabled,

drivers/infiniband/ulp/iser/iscsi_iser.c

@@ -506,6 +506,7 @@ iscsi_iser_conn_bind(struct iscsi_cls_session *cls_session,
 	iser_conn->iscsi_conn = conn;
 
 out:
+	iscsi_put_endpoint(ep);
 	mutex_unlock(&iser_conn->state_mutex);
 	return error;
 }
@@ -1002,6 +1003,7 @@ static struct iscsi_transport iscsi_iser_transport = {
 	/* connection management */
 	.create_conn            = iscsi_iser_conn_create,
 	.bind_conn              = iscsi_iser_conn_bind,
+	.unbind_conn		= iscsi_conn_unbind,
 	.destroy_conn           = iscsi_conn_teardown,
 	.attr_is_visible	= iser_attr_is_visible,
 	.set_param              = iscsi_iser_set_param,

drivers/infiniband/ulp/srp/ib_srp.c

@@ -2209,7 +2209,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 		 * to reduce queue depth temporarily.
 		 */
 		scmnd->result = len == -ENOMEM ?
-			DID_OK << 16 | QUEUE_FULL << 1 : DID_ERROR << 16;
+			DID_OK << 16 | SAM_STAT_TASK_SET_FULL : DID_ERROR << 16;
 		goto err_iu;
 	}
 

drivers/message/fusion/mptbase.c

@@ -6993,8 +6993,6 @@ mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	ioc->ioc_reset_in_progress = 1;
 	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-	rc = -1;
-
 	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
 		if (MptResetHandlers[cb_idx])
 			mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);