Ventilator mode/oxygen modality data on consultation page #8781
Conversation
- Added ventilator data as table on Ventilator tab - Added Marker Area to graphs under ventilator tab
- To do: cleanup (only keep whichever one is chosen, cleanup commented out code)
- Choosing markLine as that represents the data accurately (when switching to bar graph)
❌ Deploy Preview for care-ohc failed.
|
|
@Jacobjeevan is the PR ready for testing |
@nihal467 Yea, finalized on using the line graphs in the call yesterday. There maybe some changes with the label styling, but it's good to go for the most part. Edit: Apart from any code review updates ofc. |
Jacobjeevan
added
needs review
and removed
question
|
👋 Hi, @Jacobjeevan, This message is automatically generated by prince-chrismc/label-merge-conflicts-action so don't hesitate to report issues/improvements there. |
|
👋 Hi, @Jacobjeevan, This message is automatically generated by prince-chrismc/label-merge-conflicts-action so don't hesitate to report issues/improvements there. |
|
@aparnacoronasafe Do we need any additional changes here? As mentioned above, going with markLine graph as they are accurate when switching to bar graphs. Edit: Changes made as requested, ready for review 👍 |
|
👋 Hi, @Jacobjeevan, This message is automatically generated by prince-chrismc/label-merge-conflicts-action so don't hesitate to report issues/improvements there. |
|
tested,
note: oxygen support is not a Ventilator Interface
|
I believe I missed the changes when merging the translations; I'll get it fixed 👍 As far as this goes,
Is it acceptable to have "Respiratory support" as the caption for oxygen support as well as NIV/IV? @samholics |
yes we can do " Respiratory Support Type" |
👍 
|
|
@coderabbitai full review |
✅ Actions performedFull review triggered. |
WalkthroughThe changes involve significant updates to the Changes
Assessment against linked issues
Possibly related PRs
Suggested labels
Suggested reviewers
Poem
📜 Recent review detailsConfiguration used: CodeRabbit UI 📒 Files selected for processing (1)
🚧 Files skipped from review as they are similar to previous changes (1)
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
|
@coderabbitai full review |
✅ Actions performedFull review triggered. |
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 8
🧹 Outside diff range and nitpick comments (9)
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx (4)
3-9: Consider organizing imports by category.Group related imports together for better maintainability:
- External dependencies (React)
- Internal components
- API/Utils
- Common components
- Hooks
import { ConsultationTabProps } from "./index"; import { VentilatorPlot } from "../Consultations/VentilatorPlot"; import VentilatorTable from "../Consultations/VentilatorTable"; import routes from "../../../Redux/api"; import useQuery from "../../../Utils/request/useQuery"; import PageTitle from "@/components/Common/PageTitle"; import Loading from "@/components/Common/Loading"; import useFilters from "@/common/hooks/useFilters";
12-13: Consider documenting the pagination limit and adding type safety.The limit of 36 appears to be a magic number. Consider:
- Adding a constant with a meaningful name
- Adding a comment explaining why 36 was chosen
- Adding TypeScript types for the filter parameters
+// Number of records per page - optimized for 3 rows in the table view +const VENTILATOR_RECORDS_PER_PAGE = 36; export const ConsultationVentilatorTab = (props: ConsultationTabProps) => { const { consultationId } = props; - const { qParams, Pagination, resultsPerPage } = useFilters({ limit: 36 }); + const { qParams, Pagination, resultsPerPage } = useFilters({ limit: VENTILATOR_RECORDS_PER_PAGE });
23-25: Consider adding a context-specific loading message.The loading state could be more informative to users.
if (isLoading) { - return <Loading />; + return <Loading message="Loading respiratory support data..." />; }
1-43: Implementation aligns well with PR objectives.The component successfully addresses the requirements from issue #8264 by:
- Adding a table view for ventilation data
- Including a plot visualization
- Implementing proper pagination for large datasets
The structure is clean and maintainable, though some improvements for error handling and type safety would make it more robust.
Consider adding data caching using React Query or similar to improve performance and reduce API calls when switching between tabs.
src/components/Facility/Consultations/VentilatorTable.tsx (3)
9-17: Consider simplifying the sorting logic.The sorting logic could be more concise by removing the intermediate function.
- let sortedData: DailyRoundsModel[] = []; - - const sortData = (data: DailyRoundsModel[]) => { - return data.sort(compareByDateString("taken_at")); - }; + const sortedData = dailyRoundsList?.sort(compareByDateString("taken_at")) ?? [];
46-56: Simplify getModeOrModality function using switch statement.The function could be more readable with a switch statement.
const getModeOrModality = (round: DailyRoundsModel) => { const ventilatorInterface = round.ventilator_interface; if (!ventilatorInterface) return null; - const modeOrModality = - ventilatorInterface == "INVASIVE" || ventilatorInterface == "NON_INVASIVE" - ? round.ventilator_mode - : ventilatorInterface == "OXYGEN_SUPPORT" - ? round.ventilator_oxygen_modality - : null; - return modeOrModality; + switch(ventilatorInterface) { + case "INVASIVE": + case "NON_INVASIVE": + return round.ventilator_mode; + case "OXYGEN_SUPPORT": + return round.ventilator_oxygen_modality; + default: + return null; + } };
94-120: Make empty state handling more explicit.Consider returning null explicitly and moving the sorting closer to the render.
- if (!dailyRoundsList || dailyRoundsList.length == 0) { - return; - } else { - sortedData = sortData(dailyRoundsList); - } + if (!dailyRoundsList?.length) { + return null; + } + + const sortedData = dailyRoundsList.sort(compareByDateString("taken_at"));src/components/Facility/Consultations/components/LinePlot.tsx (1)
137-154: Consider making vertical marker styling configurable.The vertical marker implementation is good and aligns with the requirement to show ventilator mode changes. However, the styling is currently hardcoded.
Consider making the styling configurable through props:
markLine: { silent: true, data: verticalMarkerData, symbol: "none", lineStyle: { - color: "#000000", + color: props.markerColor || "#000000", + width: props.markerWidth || 1, + type: props.markerType || "solid" }, },src/components/Facility/Consultations/VentilatorPlot.tsx (1)
98-128: Use strict equality '===' for type-safe comparisonsIn TypeScript, using strict equality operators (
===and!==) is recommended to prevent unexpected type coercion during comparisons. This ensures that both the value and the type are considered, which can help avoid subtle bugs.Consider updating comparisons like:
- currentRound.ventilator_interface == "INVASIVE" + currentRound.ventilator_interface === "INVASIVE"Similarly, update other comparisons within this block to use
===instead of==.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (6)
src/Locale/en.json(5 hunks)src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx(1 hunks)src/components/Facility/ConsultationDetails/Events/EventsList.tsx(1 hunks)src/components/Facility/Consultations/VentilatorPlot.tsx(13 hunks)src/components/Facility/Consultations/VentilatorTable.tsx(1 hunks)src/components/Facility/Consultations/components/LinePlot.tsx(3 hunks)
🧰 Additional context used
🪛 Biome
src/components/Facility/Consultations/VentilatorPlot.tsx
[error] 48-48: Avoid the use of spread (...) syntax on accumulators.
Spread syntax should be avoided on accumulators (like those in .reduce) because it causes a time complexity of O(n^2).
Consider methods such as .splice or .push instead.
(lint/performance/noAccumulatingSpread)
🔇 Additional comments (8)
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx (1)
34-40: Verify data structure and add type safety for dailyRoundsList.
The component passes data?.results to child components, but we should verify:
- The type safety of the data structure
- That both VentilatorTable and VentilatorPlot handle undefined/empty results properly
✅ Verification successful
Let me gather more information about the DailyRoundsModel type and how it's used.
Based on the gathered information, I can now provide the final response:
Type safety is properly implemented for dailyRoundsList prop
The component's implementation is type-safe:
- Both VentilatorTable and VentilatorPlot components properly type their props with optional DailyRoundsModel[]
- DailyRoundsModel is well-defined with comprehensive typing for all ventilator-related fields
- The optional chaining on data?.results is appropriate since it comes from a query result
- Both child components handle undefined data gracefully through TypeScript's optional props
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Search for type definitions and prop interfaces
ast-grep --pattern 'interface $name {
$$$
dailyRoundsList: $_
$$$
}'
# Check how other components handle undefined results
rg -A 5 'dailyRoundsList.*\?'
Length of output: 2562
Script:
#!/bin/bash
# Search for DailyRoundsModel definition
ast-grep --pattern 'type DailyRoundsModel = {
$$$
}'
# Also check for interface definition
ast-grep --pattern 'interface DailyRoundsModel {
$$$
}'
# Check how data is handled in these components
rg -A 5 'const.*data.*=' src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx
Length of output: 7532
src/components/Facility/Consultations/VentilatorTable.tsx (1)
1-7: LGTM: Imports and type definitions are well-structured.
The component has appropriate imports and well-typed props definition.
src/components/Facility/Consultations/components/LinePlot.tsx (2)
12-12: LGTM: MarkLineComponent properly imported and registered.
The addition of MarkLineComponent is correctly implemented both in the imports and echarts registration, which is necessary for the vertical markers showing ventilator mode changes.
Also applies to: 30-30
137-154: Verify integration with ventilator mode data structure.
Please ensure that the verticalMarkerData format matches the expected structure from the ventilator mode changes API.
✅ Verification successful
Let me gather more information about the data structure and transformation logic.
Let me get one final piece of information about the data structure.
Integration with ventilator data structure is properly implemented
The code correctly processes ventilator data changes through the getMarkLineData function which:
- Tracks changes in ventilator interface and modality/mode
- Uses the DailyRoundsModel interface which contains all required ventilator-related fields
- Generates vertical markers at points where ventilator settings change
- Properly formats the data for ECharts markLine visualization
The implementation matches the expected data structure and handles all ventilator parameters (PIP, MAP, PEEP, FiO2, etc.) consistently.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Search for usage of LinePlot with verticalMarkerData to verify data structure
rg -l "verticalMarkerData" | xargs rg -A 10 "LinePlot.*verticalMarkerData"
# Search for the data transformation logic
rg -l "getMarkLineData" | xargs rg -A 10 "getMarkLineData"
Length of output: 4470
Script:
#!/bin/bash
# Search for the condition and legend transformation logic
rg -A 10 "getConditionAndLegend"
# Search for the mode/modality transformation logic
rg -A 10 "getModeOrModality"
# Look for the interface definition of verticalMarkerData
ast-grep --pattern 'interface $_Props {
$$$
verticalMarkerData?: $_;
$$$
}'
Length of output: 7740
Script:
#!/bin/bash
# Look for the DailyRoundsModel interface definition
ast-grep --pattern 'interface DailyRoundsModel {
$$$
}'
# Look for any type definitions related to markLine data
ast-grep --pattern 'type $_MarkLine = {
$$$
}'
Length of output: 7196
src/Locale/en.json (4)
136-142: LGTM! Oxygen modality short forms are well-defined.
The short forms follow standard medical abbreviations and maintain consistency with their full forms.
213-225: LGTM! Ventilator mode short forms are properly defined.
The abbreviations follow standard medical conventions and maintain clear mapping to their full forms.
625-625: LGTM! Date/time labels are clear and consistent.
The start and end datetime labels follow proper capitalization and provide unambiguous meaning.
Also applies to: 1160-1160
1252-1258: LGTM! Ventilator-related labels align with PR objectives.
The changes correctly implement the requirements from issue #8612:
- "Ventilator Interface" is renamed to "Respiratory Support Type"
- Additional ventilator-related fields use proper medical terminology
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx
Show resolved
Hide resolved
There was a problem hiding this comment.
Actionable comments posted: 5
🧹 Outside diff range and nitpick comments (8)
src/components/Facility/Consultations/VentilatorTable.tsx (3)
9-16: Consider performance optimizations and type safety improvements.
- The
sortedDataarray could be memoized to prevent unnecessary re-sorting on re-renders- The component's return type should be explicitly defined for better type safety
-export default function VentilatorTable(props: VentilatorTableProps) { +export default function VentilatorTable(props: VentilatorTableProps): JSX.Element | undefined { const { t } = useTranslation(); const { dailyRoundsList } = props; - let sortedData: DailyRoundsModel[] = []; + const sortedData = React.useMemo( + () => dailyRoundsList ? sortData([...dailyRoundsList]) : [], + [dailyRoundsList] + ); const sortData = (data: DailyRoundsModel[]) => { return data.sort(compareByDateString("taken_at")); };
18-53: Optimize VentilatorTableRow component.
- The component should be memoized to prevent unnecessary re-renders
- Remove unnecessary optional chaining since
dailyRoundis required in props-const VentilatorTableRow = ({ +const VentilatorTableRow = React.memo(({ dailyRound, start_date, end_date, }: { dailyRound: DailyRoundsModel; start_date: string; end_date: string; -}) => { +}) => { // ... return ( <tr className="text-center text-sm"> <td className="max-w-52 px-2 py-2">{start_date}</td> <td className="max-w-52 px-2 py-2">{end_date}</td> <td className="max-w-52 px-2 py-2"> - {t(`RESPIRATORY_SUPPORT__${dailyRound?.ventilator_interface}`)} + {t(`RESPIRATORY_SUPPORT__${dailyRound.ventilator_interface}`)} </td> <td className="max-w-52 px-2 py-2">{getModeText()}</td> </tr> ); -}; +});
55-65: Improve readability of getModeOrModality function.Consider using a switch statement instead of nested ternaries for better readability.
-const getModeOrModality = (round: DailyRoundsModel) => { +const getVentilatorModeOrOxygenModality = (round: DailyRoundsModel) => { const ventilatorInterface = round.ventilator_interface; if (!ventilatorInterface) return null; - const modeOrModality = - ventilatorInterface == "INVASIVE" || ventilatorInterface == "NON_INVASIVE" - ? round.ventilator_mode - : ventilatorInterface == "OXYGEN_SUPPORT" - ? round.ventilator_oxygen_modality - : null; - return modeOrModality; + + switch (ventilatorInterface) { + case "INVASIVE": + case "NON_INVASIVE": + return round.ventilator_mode; + case "OXYGEN_SUPPORT": + return round.ventilator_oxygen_modality; + default: + return null; + } };src/components/Facility/Consultations/components/LinePlot.tsx (2)
140-157: Consider adding type definition for verticalMarkerData.The vertical marker implementation is well-structured and aligns with the PR objectives. However, consider adding a type definition for the verticalMarkerData structure:
interface VerticalMarkerData { xAxis: string | number; label: { formatter: string; }; } interface LinePlotProps { // ... other props verticalMarkerData?: VerticalMarkerData[] | null; }
Line range hint
1-275: Architectural approach aligns well with requirements.The enhancement of LinePlot to support vertical markers is a clean and maintainable solution for visualizing ventilator mode changes. The implementation:
- Maintains backward compatibility with existing usage
- Properly handles edge cases (empty data, null values)
- Integrates seamlessly with the existing chart functionality
Consider extracting common chart configurations into a separate configuration file to improve maintainability as the component grows.
src/components/Facility/Consultations/VentilatorPlot.tsx (3)
29-33: Consider adding prop validation and documentation.The component's interface could benefit from proper TypeScript types and JSDoc documentation to improve maintainability.
+/** + * Displays ventilator data plots for a patient's daily rounds. + * @param dailyRoundsList - List of daily rounds data containing ventilator measurements + */ export const VentilatorPlot = ({ dailyRoundsList, }: { - dailyRoundsList?: DailyRoundsModel[]; + dailyRoundsList?: DailyRoundsModel[]; // Consider making this required if data should always be available }) => {
79-151: Simplify condition logic and improve maintainability.The
getConditionAndLegendfunction contains complex nested logic that could be simplified and made more maintainable.+ const VENTILATOR_CONDITIONS = { + PRESSURE_METRICS: [ + 'ventilator_pip', + 'ventilator_mean_airway_pressure', + 'ventilator_resp_rate', + 'ventilator_pressure_support', + 'ventilator_tidal_volume', + 'ventilator_peep', + ], + FLOW_METRICS: [ + 'etco2', + 'ventilator_oxygen_modality_flow_rate', + ], + }; + const getConditionAndLegend = ( name: string, currentRound: DailyRoundsModel, ) => { - let condition = false; - let legend = ""; - switch (name) { - // ... current implementation - } + const condition = VENTILATOR_CONDITIONS.PRESSURE_METRICS.includes(name) + ? isVentilatorMode(currentRound) + : determineCondition(name, currentRound); + + const legend = generateLegend(currentRound); return { condition, legend }; };
Line range hint
232-359: Consider extracting repeated LinePlot configurations.The component contains multiple LinePlot components with similar configurations. This could be simplified by extracting common configurations.
+ interface PlotConfig { + title: string; + name: string; + low?: number; + high?: number; + dataKey: keyof GraphData[string]; + } + + const PLOT_CONFIGS: PlotConfig[] = [ + { title: 'PIP', name: 'PIP', low: 12, high: 30, dataKey: 'ventilator_pip' }, + { title: 'MAP', name: 'MAP', low: 12, high: 25, dataKey: 'ventilator_mean_airway_pressure' }, + // ... other configurations + ]; + + const renderPlot = (config: PlotConfig) => ( + <div className="rounded-lg border bg-white px-4 pt-4 shadow"> + <LinePlot + title={config.title} + name={config.name} + xData={dates} + yData={yAxisData(config.dataKey)} + low={config.low} + high={config.high} + verticalMarkerData={getMarkLineData(config.dataKey)} + /> + </div> + ); + return ( <div> <div className="grid-row-1 grid gap-4 md:grid-cols-2"> - {/* Current implementation */} + {PLOT_CONFIGS.map(renderPlot)} </div> </div> );
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (3)
src/components/Facility/Consultations/VentilatorPlot.tsx(13 hunks)src/components/Facility/Consultations/VentilatorTable.tsx(1 hunks)src/components/Facility/Consultations/components/LinePlot.tsx(3 hunks)
🔇 Additional comments (4)
src/components/Facility/Consultations/VentilatorTable.tsx (2)
1-7: LGTM! Clean imports and type definitions.
The imports and type definitions are well-organized and appropriate for the component's functionality.
103-129: Improve empty state handling.
Instead of returning undefined, consider rendering a message or an empty state component for better user experience.
if (!dailyRoundsList || dailyRoundsList.length == 0) {
- return;
+ return (
+ <div className="my-3 w-full rounded-lg border bg-white px-4 pt-3 shadow">
+ <p className="text-center text-gray-500 py-4">
+ {t("no_ventilator_data_available")}
+ </p>
+ </div>
+ );
} else {
sortedData = sortData(dailyRoundsList);
}✅ Verification successful
Use existing "no_data_found" translation for empty state
Instead of adding a new translation key, use the existing "no_data_found" translation that is already available in all language files.
if (!dailyRoundsList || dailyRoundsList.length == 0) {
- return;
+ return (
+ <div className="my-3 w-full rounded-lg border bg-white px-4 pt-3 shadow">
+ <p className="text-center text-gray-500 py-4">
+ {t("no_data_found")}
+ </p>
+ </div>
+ );
} else {
sortedData = sortData(dailyRoundsList);
}🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Verify if the translation key exists
rg "no_ventilator_data_available" -g "*.json"
Length of output: 45
Script:
#!/bin/bash
# Check for existing translation keys in the locale files
fd -e json -x cat {} \; | jq 'keys' 2>/dev/null
# Look for similar empty state patterns in the codebase
rg "no.*data.*available" -g "*.json"
# Check for other empty state patterns in the UI
ast-grep --pattern 'return <div className="$_">
<p className="$_">{t("$_")}</p>
</div>'
Length of output: 120045
Script:
#!/bin/bash
# Look for similar empty state patterns in the codebase
rg "no.*data" -g "*.tsx" -A 2 -B 2
# Check for existing empty state components
ast-grep --pattern 'return (
<div className="$_">
<p className="$_">{t("no_$_")}</p>
</div>
)'
# Look for existing no data translations
rg "no_data" -g "*.json"
Length of output: 11631
src/components/Facility/Consultations/components/LinePlot.tsx (2)
12-12: LGTM: MarkLineComponent integration is correct.
The addition of MarkLineComponent is properly implemented both in imports and echarts registration, which is necessary for the vertical markers feature used to indicate changes in ventilator modality.
Also applies to: 30-30
34-34: Type safety improvements needed for props.
While the yData filtering has been improved with proper type safety, the component props are still using any type. This was previously flagged in the past review.
Also applies to: 40-50
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Outside diff range and nitpick comments (2)
src/components/Facility/Consultations/VentilatorPlot.tsx (2)
97-171: Simplify repeated conditions in getConditionAndLegend.The switch cases contain repeated conditions that could be extracted into constants or helper functions for better maintainability.
+ const OXYGEN_SUPPORT_MODALITIES = [ + 'NASAL_PRONGS', + 'SIMPLE_FACE_MASK', + 'NON_REBREATHING_MASK', + 'HIGH_FLOW_NASAL_CANNULA' + ]; + const isVentilatorMode = (interface: string) => + interface === 'INVASIVE' || interface === 'NON_INVASIVE'; const getConditionAndLegend = (name: string, currentRound: DailyRoundsModel) => { let condition = false; switch (name) { case "ventilator_pip": // ... other cases - condition = (currentRound.ventilator_interface === "INVASIVE" || - currentRound.ventilator_interface === "NON_INVASIVE") && - !!currentRound.ventilator_mode; + condition = isVentilatorMode(currentRound.ventilator_interface) && + !!currentRound.ventilator_mode; break; case "ventilator_spo2": - condition = currentRound.ventilator_interface === "OXYGEN_SUPPORT" && - (currentRound.ventilator_oxygen_modality === "NASAL_PRONGS" || - currentRound.ventilator_oxygen_modality === "SIMPLE_FACE_MASK" || - // ... other conditions + condition = currentRound.ventilator_interface === "OXYGEN_SUPPORT" && + OXYGEN_SUPPORT_MODALITIES.includes(currentRound.ventilator_oxygen_modality);
Line range hint
252-382: Consider extracting plot configurations to reduce repetition.The LinePlot components share similar structure but differ in their specific values. Consider extracting these configurations to a constant or configuration object.
const PLOT_CONFIGS = [ { title: "PIP", name: "ventilator_pip", low: 12, high: 30, }, // ... other configurations ]; // Usage in render: {PLOT_CONFIGS.map(({ title, name, low, high }) => ( <div key={name} className="rounded-lg border bg-white px-4 pt-4 shadow"> <LinePlot title={title} name={name} xData={dates} yData={yAxisData(name)} low={low} high={high} verticalMarkerData={getMarkLineData(name)} /> </div> ))}
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (2)
src/components/Facility/Consultations/VentilatorPlot.tsx(13 hunks)src/components/Facility/Consultations/VentilatorTable.tsx(1 hunks)
🚧 Files skipped from review as they are similar to previous changes (1)
- src/components/Facility/Consultations/VentilatorTable.tsx
🔇 Additional comments (1)
src/components/Facility/Consultations/VentilatorPlot.tsx (1)
47-54: LGTM! Well-structured component initialization.
The component properly types its props and state, and includes appropriate loading handling.
There was a problem hiding this comment.
Actionable comments posted: 1
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (1)
src/components/Facility/Consultations/components/BinaryChronologicalChart.tsx(1 hunks)
🔇 Additional comments (1)
src/components/Facility/Consultations/components/BinaryChronologicalChart.tsx (1)
Line range hint 1-70: Verify the impact on ventilator data display
The component appears to be used for displaying ventilator mode/oxygen modality data. Let's verify its usage to ensure the changes align with the PR objectives.
✅ Verification successful
No impact on ventilator data display
The changes in BinaryChronologicalChart component are safe as they only involve the component's implementation without modifying its interface or behavior. The component is used in VentilatorPlot.tsx to display "Bilateral Air Entry" data with simple true/false values, which aligns perfectly with the component's current implementation and props structure.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Find where BinaryChronologicalChart is used in ventilator-related components
# Test: Search for imports and usage of BinaryChronologicalChart in ventilator components
rg -l "BinaryChronologicalChart" src/components/Facility/Consultations/
Length of output: 206
Script:
#!/bin/bash
# Let's examine how BinaryChronologicalChart is used in VentilatorPlot.tsx
rg -A 10 "BinaryChronologicalChart" src/components/Facility/Consultations/VentilatorPlot.tsx
Length of output: 786
src/components/Facility/Consultations/components/BinaryChronologicalChart.tsx
Show resolved
Hide resolved
|
👋 Hi, @Jacobjeevan, This message is automatically generated by prince-chrismc/label-merge-conflicts-action so don't hesitate to report issues/improvements there. |
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Outside diff range and nitpick comments (17)
src/components/Facility/Consultations/components/ReactEcharts.tsx (1)
8-8: LGTM! The addition of MarkLineComponent enables vertical markers for ventilation changes.The addition of
MarkLineComponentis well-implemented and necessary for visualizing changes in ventilation modality through vertical markers on time series graphs, as specified in Issue #8264.These vertical markers will be crucial for:
- Clearly indicating transitions between different ventilation modes
- Helping medical staff quickly identify when changes in respiratory support occurred
- Improving the overall readability of the time series data
Consider adding tooltips to these markers to display additional context about the ventilation changes when users hover over them.
Also applies to: 31-31
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx (1)
35-41: Consider enhancing accessibility for the ventilator data display.While the implementation is functionally correct, consider adding ARIA labels and roles to improve accessibility:
- <VentilatorTable dailyRoundsList={data?.results} /> - <VentilatorPlot dailyRoundsList={data?.results} /> - {Boolean(data?.count && data.count > 0) && ( - <div className="mt-4 flex w-full justify-center"> + <VentilatorTable + dailyRoundsList={data?.results} + aria-label="Ventilator readings table" + /> + <VentilatorPlot + dailyRoundsList={data?.results} + aria-label="Ventilator readings visualization" + /> + {Boolean(data?.count && data.count > 0) && ( + <nav className="mt-4 flex w-full justify-center" aria-label="Ventilator data pagination">cypress/e2e/patient_spec/PatientDoctorConnect.cy.ts (3)
Line range hint
1-21: Consider moving test data to fixtures for better maintainability.While the current setup is functional, consider these improvements:
- Move test data (patient name, user names) to a fixture file
- Group constants by type (e.g., separate user data from other test data)
Example structure:
// fixtures/doctor-connect.json { "patient": { "name": "Dummy Patient 11" }, "users": { "doctor": "Dev Doctor", "nurse": "Dev Staff", "teleIcuDoctor": "Dev Doctor Two" } }
Line range hint
23-52: Enhance test reliability and coverage.The test implementation could be improved in several ways:
- Add retry mechanisms for potentially flaky operations
- Include error state testing
- Add more descriptive test steps using
cy.log()Apply these improvements:
it("Patient Doctor connect phone redirection and sort by filter", () => { + cy.log('Visiting patient and opening doctor connect panel') patientPage.visitPatient(patientName); - doctorconnect.clickDoctorConnectButton(); + cy.intercept('GET', '**/api/v1/facility/**/doctor_connect_data').as('doctorData') + doctorconnect.clickDoctorConnectButton() + cy.wait('@doctorData') + cy.log('Verifying user roles visibility') cy.verifyContentPresence("#doctor-connect-home-doctor", [doctorUser]); cy.verifyContentPresence("#doctor-connect-home-nurse", [nurseUser]); cy.verifyContentPresence("#doctor-connect-remote-doctor", [teleIcuUser]); + cy.log('Testing copy functionality') - doctorconnect.CopyFunctionTrigger(); + cy.intercept('POST', '**/api/v1/copy_phone_number').as('copyPhone') + doctorconnect.CopyFunctionTrigger() + cy.wait('@copyPhone').its('response.statusCode').should('eq', 200) // Add error state testing + cy.log('Testing error states') + cy.intercept('GET', '**/api/v1/facility/**/doctor_connect_data', { + statusCode: 500, + body: { error: 'Internal Server Error' } + }).as('errorState') + doctorconnect.clickDoctorConnectButton() + cy.get('.error-message').should('be.visible')
Line range hint
54-56: Consider adding comprehensive cleanup steps.While saving localStorage is good, consider adding these cleanup steps:
- Reset any modified application state
- Clear any test artifacts
- Verify the system is in a clean state
afterEach(() => { cy.saveLocalStorage(); + // Reset application state + cy.window().then((win) => { + win.sessionStorage.clear(); + }); + // Verify clean state + cy.get('#doctor-connect-panel').should('not.exist'); });cypress/e2e/patient_spec/PatientFileUpload.ts (3)
Line range hint
9-24: Consider moving test data to fixtures.While the test setup is well-structured, consider the following improvements:
- Move test data (patient names, credentials) to a fixture file for better maintainability
- Use environment variables or secure vaults for sensitive data like passwords
Example fixture structure:
// cypress/fixtures/test-data.json { "patients": { "one": "Dummy Patient 3", "two": "Dummy Patient 4", "three": "Dummy Patient 5" }, "users": { "nurse1": { "username": "dummynurse1" }, "nurse2": { "username": "dummynurse2" } } }
Line range hint
25-115: Enhance test coverage and reliability.The test cases are well-structured but could benefit from the following improvements:
- Add negative test cases (e.g., invalid file types, large files)
- Validate file content and type after upload
- Add retry logic for notification checks to prevent flakiness
Example improvements:
// Add negative test case it("Should handle invalid file types", () => { patientPage.visitPatient(patientNameOne); visitPatientFileUploadSection.call(patientFileUpload); patientFileUpload.uploadFile('invalid.xyz'); cy.verifyNotification("Invalid file type"); }); // Add file content validation it("Upload a File and verify content", () => { // ... existing upload code ... cy.get('[data-cy="file-content"]').should('contain', expectedContent); }); // Add retry logic for notifications cy.get('.notification', { timeout: 10000 }) .should('be.visible') .and('contain', 'File Uploaded Successfully');
Line range hint
117-124: Add page URL verification.While running the same tests in different contexts is a good approach, consider adding URL verification to ensure the tests are running on the correct pages.
runTests( "Patient File upload in patient details page", () => { cy.url().should('include', '/patient/'); patientFileUpload.clickFileUploadIcon(); } ); runTests( "Patient File upload in patient consultation page", () => { cy.url().should('include', '/consultation/'); patientFileUpload.clickFileTab(); } );cypress/e2e/facility_spec/FacilityHomepage.cy.ts (1)
Based on the investigation of the codebase, I can now provide the final response:
Additional test coverage needed for ventilator and oxygen modality features
The existing test files do not cover the new ventilator mode and oxygen modality features in the consultation page. A new test file or additional test cases in
PatientConsultationCreation.cy.tsshould be created to verify:
- Display of ventilator modes (NIV/IV)
- Oxygen support modality data
- Updated "Respiratory Support Type" label
- SpO2 label changes in events module
While there are some oxygen-related tests in
PatientLogUpdate.cy.tsandFacilityCreation.cy.ts, they only cover facility oxygen capacity and basic respiratory support logging. The consultation-specific features mentioned in the PR objectives remain untested.🔗 Analysis chain
Line range hint
8-177: Add test coverage for ventilator and oxygen modality features.Based on the PR objectives, the test suite should include coverage for the new ventilator mode and oxygen modality features. Consider adding test cases to verify:
- Display of ventilator modes (NIV/IV) on the consultation page
- Oxygen support modality data visibility
- Updated labeling ("Respiratory Support Type" instead of "Ventilator Interface")
- SpO2 label changes in the events module
Here's a suggested test structure to add:
it("Verify ventilator mode and oxygen modality display", () => { // Navigate to consultation page // Verify ventilator modes (NIV/IV) are displayed // Verify oxygen modality data // Verify correct labeling of "Respiratory Support Type" // Verify SpO2 labeling in events module });🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Check if there are any other test files covering these features echo "Searching for existing test coverage..." rg -l "ventilator|oxygen|respiratory|spo2" "cypress/e2e"Length of output: 242
Script:
#!/bin/bash # Let's check the content of these test files to understand existing coverage echo "=== Content of PatientLogUpdate.cy.ts ===" rg -A 5 -B 5 "ventilator|oxygen|respiratory|spo2" "cypress/e2e/patient_spec/PatientLogUpdate.cy.ts" echo -e "\n=== Content of FacilityCreation.cy.ts ===" rg -A 5 -B 5 "ventilator|oxygen|respiratory|spo2" "cypress/e2e/facility_spec/FacilityCreation.cy.ts" # Also check if there are any consultation-related test files echo -e "\n=== Searching for consultation test files ===" fd "consultation" "cypress/e2e"Length of output: 4523
Script:
#!/bin/bash # Let's check the consultation test files for any existing ventilator/oxygen related tests echo "=== Content of PatientConsultationCreation.cy.ts ===" rg -A 5 -B 5 "ventilator|oxygen|respiratory|spo2|NIV|IV" "cypress/e2e/patient_spec/PatientConsultationCreation.cy.ts" echo -e "\n=== Content of PatientConsultationDischarge.cy.ts ===" rg -A 5 -B 5 "ventilator|oxygen|respiratory|spo2|NIV|IV" "cypress/e2e/patient_spec/PatientConsultationDischarge.cy.ts" # Let's also check for any page objects related to consultation echo -e "\n=== Searching for consultation page objects ===" fd "consultation" "cypress/support/pageObjects"Length of output: 746
cypress/e2e/patient_spec/PatientPrescription.cy.ts (1)
Line range hint
1-184: Add test coverage for ventilator and oxygen modality features.The PR objectives indicate significant changes to ventilator mode and oxygen modality data on the consultation page. However, this test file lacks coverage for these new features. Consider adding test cases to verify:
- Display of NIV and IV modes
- Oxygen support modalities
- Ventilator interface labeling changes
- SpO2 labeling in events module
Would you like me to help generate test cases for these scenarios? I can create a new test file specifically for ventilator and oxygen modality features.
cypress/e2e/patient_spec/PatientRegistration.cy.ts (2)
Line range hint
9-52: Consider improving test data organization.While the test setup is well-structured, consider these improvements for better maintainability:
- Move test data to fixture files
- Extract helper functions (
calculateAge,getRelativeDateString) to a utils fileExample structure:
// cypress/fixtures/patient-data.json { "yearOfBirth": "2001", "patientFacility": "Dummy Facility 40", // ... other test data } // cypress/support/utils.ts export const calculateAge = (yearOfBirth: string): number => { const currentYear = new Date().getFullYear(); return currentYear - parseInt(yearOfBirth); }; export const getRelativeDateString = (deltaDays = 0): string => { // ... existing implementation };
Line range hint
279-281: Consider structuring test cases using the Page Object Model pattern more extensively.The test implementation could benefit from:
- Moving complex UI interactions to page objects
- Creating dedicated page objects for ventilator and oxygen modality interactions
- Implementing shared test utilities for common verification steps
src/components/Facility/Consultations/VentilatorPlot.tsx (5)
31-47: Consider strengthening type safety in the interface definition.The interface could be improved by:
- Making essential properties required (non-optional)
- Using more specific types for numeric values
- Adding JSDoc documentation
interface graphDataProps { [key: string]: { - bilateral_air_entry?: boolean; - etco2?: number; - id?: string; + /** Unique identifier for the data point */ + id: string; + bilateral_air_entry: boolean | null; + etco2: number | null; ventilator_fio2?: number; // ... other properties }; }
99-173: Simplify complex condition logic in getConditionAndLegend.The function has multiple nested conditions that could be simplified using lookup tables or constants.
+ const VENTILATOR_CONDITIONS = { + ventilator_pip: (round: DailyRoundsModel) => + ['INVASIVE', 'NON_INVASIVE'].includes(round.ventilator_interface) && !!round.ventilator_mode, + ventilator_fio2: (round: DailyRoundsModel) => + round.ventilator_interface === 'OXYGEN_SUPPORT' && + round.ventilator_oxygen_modality === 'HIGH_FLOW_NASAL_CANNULA', + // ... other conditions + }; const getConditionAndLegend = (name: string, currentRound: DailyRoundsModel) => { - let condition = false; + const condition = VENTILATOR_CONDITIONS[name]?.(currentRound) ?? false; // ... rest of the function };
189-239: Optimize the marker data generation logic.The nested while loops in
getMarkLineDatacould be performance intensive for large datasets.Consider using a more efficient approach:
const getMarkLineData = (name: string) => { + if (!dailyRoundsList?.length) return []; + + const markLineData = []; + let currentGroup = null; + + for (let i = 0; i < dailyRoundsList.length; i++) { + const round = dailyRoundsList[i]; + const { condition, legend } = getConditionAndLegend(name, round); + const modeOrModality = getModeOrModality(round); + + if (!condition) continue; + + if (!currentGroup || + currentGroup.interface !== round.ventilator_interface || + currentGroup.modality !== modeOrModality) { + currentGroup = { + interface: round.ventilator_interface, + modality: modeOrModality, + startIndex: i + }; + // Add marker for group start + markLineData.push({ + name: legend, + xAxis: dates[i], + label: { /* ... label config ... */ } + }); + } + } + + return markLineData; };
265-265: Consider consolidating vertical marker configuration.The
verticalMarkerDataprop is repeated across multipleLinePlotcomponents with similar configurations.Consider creating a helper function or configuration object:
const getPlotConfig = (name: string) => ({ verticalMarkerData: getMarkLineData(name), // Other common config properties could be added here }); // Usage in JSX <LinePlot {...getPlotConfig("ventilator_pip")} title="PIP" name="PIP" // ... other props />Also applies to: 276-278, 289-289, 300-300, 309-309, 320-320, 331-331, 342-342, 353-353, 370-372, 381-383
93-95: Add error boundary around loading state.The loading state should be wrapped in an error boundary to handle potential rendering errors.
+ import ErrorBoundary from '@/components/Common/ErrorBoundary'; if (!dailyRoundsList) { - return <Loading />; + return ( + <ErrorBoundary> + <Loading /> + </ErrorBoundary> + ); }
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (24)
cypress/e2e/assets_spec/AssetHomepage.cy.ts(1 hunks)cypress/e2e/assets_spec/AssetsCreation.cy.ts(1 hunks)cypress/e2e/assets_spec/AssetsManage.cy.ts(1 hunks)cypress/e2e/facility_spec/FacilityCreation.cy.ts(1 hunks)cypress/e2e/facility_spec/FacilityHomepage.cy.ts(1 hunks)cypress/e2e/facility_spec/FacilityInventory.cy.ts(1 hunks)cypress/e2e/facility_spec/FacilityManage.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientBedManagement.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientConsultationCreation.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientDoctorConnect.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientFileUpload.ts(1 hunks)cypress/e2e/patient_spec/PatientLogUpdate.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientPrescription.cy.ts(1 hunks)cypress/e2e/patient_spec/PatientRegistration.cy.ts(1 hunks)cypress/e2e/resource_spec/ResourcesHomepage.cy.ts(1 hunks)cypress/e2e/users_spec/UsersCreation.cy.ts(1 hunks)cypress/e2e/users_spec/UsersManage.cy.ts(1 hunks)public/locale/en.json(5 hunks)src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx(1 hunks)src/components/Facility/ConsultationDetails/Events/EventsList.tsx(1 hunks)src/components/Facility/Consultations/VentilatorPlot.tsx(13 hunks)src/components/Facility/Consultations/components/BinaryChronologicalChart.tsx(1 hunks)src/components/Facility/Consultations/components/LinePlot.tsx(2 hunks)src/components/Facility/Consultations/components/ReactEcharts.tsx(2 hunks)
✅ Files skipped from review due to trivial changes (11)
- cypress/e2e/assets_spec/AssetHomepage.cy.ts
- cypress/e2e/assets_spec/AssetsCreation.cy.ts
- cypress/e2e/assets_spec/AssetsManage.cy.ts
- cypress/e2e/facility_spec/FacilityCreation.cy.ts
- cypress/e2e/facility_spec/FacilityInventory.cy.ts
- cypress/e2e/facility_spec/FacilityManage.cy.ts
- cypress/e2e/patient_spec/PatientBedManagement.cy.ts
- cypress/e2e/patient_spec/PatientConsultationCreation.cy.ts
- cypress/e2e/patient_spec/PatientLogUpdate.cy.ts
- cypress/e2e/resource_spec/ResourcesHomepage.cy.ts
- cypress/e2e/users_spec/UsersCreation.cy.ts
🚧 Files skipped from review as they are similar to previous changes (3)
- src/components/Facility/ConsultationDetails/Events/EventsList.tsx
- src/components/Facility/Consultations/components/BinaryChronologicalChart.tsx
- src/components/Facility/Consultations/components/LinePlot.tsx
🧰 Additional context used
📓 Learnings (1)
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx (1)
Learnt from: Jacobjeevan
PR: ohcnetwork/care_fe#8781
File: src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx:15-21
Timestamp: 2024-11-06T07:45:10.607Z
Learning: In cases where child components handle error and loading states, it's unnecessary to add additional error handling in the parent component.
🔇 Additional comments (14)
src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx (3)
1-10: LGTM! Import statements are well-organized.
The new imports are properly organized and align with the component's enhanced functionality for handling ventilator data display and pagination.
16-22: LGTM! Clean implementation of data fetching.
The data fetching implementation with useQuery is clean and properly structured with pagination parameters.
24-26: LGTM! Loading state is properly handled.
The loading state implementation is clean and follows React best practices.
cypress/e2e/patient_spec/PatientDoctorConnect.cy.ts (1)
Line range hint 23-52: Add test coverage for ventilator mode and oxygen modality data.
Based on the PR objectives (issues #8264, #8612, #8611), consider adding test cases for:
- Verification of ventilator mode display (NIV/IV)
- Oxygen support modality changes
- Correct labeling of "Respiratory Support Type"
- SpO2 value updates in events module
Would you like me to help generate additional test cases for these scenarios?
cypress/e2e/patient_spec/PatientFileUpload.ts (1)
Line range hint 1-8: LGTM! Well-structured test setup using Page Object Model.
The imports and page object instantiation follow Cypress best practices, making the tests maintainable and readable.
cypress/e2e/facility_spec/FacilityHomepage.cy.ts (1)
2-5: LGTM! Import changes are well-organized.
The addition of AssetPagination and reorganization of imports maintain good code organization while supporting the pagination testing functionality.
cypress/e2e/users_spec/UsersManage.cy.ts (1)
4-4: LGTM! Import statement is correctly placed and utilized.
The import of UserPage from the UserSearch module is necessary as it's properly instantiated and used throughout the test suite. The import organization follows good practices by grouping related imports together.
cypress/e2e/patient_spec/PatientPrescription.cy.ts (1)
3-3: LGTM!
The import statement reorganization maintains code clarity and follows a logical grouping pattern.
cypress/e2e/patient_spec/PatientRegistration.cy.ts (2)
1-7: LGTM! Import statements are well-organized.
The new imports are logically structured and support the test functionality for patient registration and transfer scenarios.
Line range hint 95-277: Add test coverage for ventilator and oxygen modality data.
Given the PR objectives focus on ventilator mode and oxygen modality data display, consider adding test cases to verify:
- Ventilator interface display changes
- Oxygen support type selection
- SpO2 value updates in events module
Would you like me to help generate test cases for these scenarios?
public/locale/en.json (4)
136-142: LGTM: Oxygen modality short forms are accurate and consistent.
The short forms for oxygen modalities follow medical conventions:
- HFNC (High Flow Nasal Cannula)
- NP (Nasal Prongs)
- NRM (Non Rebreathing Mask)
- SFM (Simple Face Mask)
213-225: LGTM: Ventilator mode short forms are accurate and consistent.
The short forms for ventilator modes follow standard medical abbreviations:
- CMV (Control Mechanical Ventilation)
- PCV (Pressure Control Ventilation)
- PC-SIMV (Pressure Controlled SIMV)
- C-PAP/PSV (C-PAP / Pressure Support Ventilation)
- SIMV (Synchronised Intermittent Mandatory Ventilation)
- VCV (Volume Control Ventilation)
- VC-SIMV (Volume Controlled SIMV)
625-625: LGTM: Start/End datetime labels are clear and consistent.
The labels for start and end datetime follow a consistent format:
- "start_datetime": "Start Date/Time"
- "end_datetime": "End Date/Time"
Also applies to: 1160-1160
1252-1258: Verify terminology change from "Ventilator Interface" to "Respiratory Support Type".
The change from "Ventilator Interface" to "Respiratory Support Type" aligns with Issue #8612's request to rename labels when "Oxygen Support" is selected. This change improves clarity by removing the term "Ventilator" where it's not applicable.
The other ventilator-related labels are clear and consistent:
- "ventilator_log": "Ventilator Log"
- "ventilator_modality": "Modality"
- "ventilator_mode": "Ventilator Mode"
- "ventilator_oxygen_modality": "Oxygen Modality"
- "ventilator_oxygen_modality_oxygen_rate": "Oxygen Flow Rate"
- "ventilator_spo2": "SpO₂"
✅ Verification successful
Let me gather more information about the translations and labels to ensure consistency.
Let me check the actual constants in the codebase since the previous path wasn't found.
Based on the gathered information, I can now provide the final response:
The terminology change from "Ventilator Interface" to "Respiratory Support Type" is correctly implemented and consistent
The change aligns with the codebase's implementation where:
- The translation key
ventilator_interfacecorrectly displays "Respiratory Support Type" - The constants and filters use consistent terminology with
RESPIRATORY_SUPPORToptions:- OXYGEN_SUPPORT: "Oxygen Support"
- NON_INVASIVE: "Non-Invasive ventilator (NIV)"
- INVASIVE: "Invasive ventilator (IV)"
- UNKNOWN: "None"
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Verify the terminology change is consistent across the codebase
# Test: Search for any remaining instances of "Ventilator Interface"
rg -i "ventilator.?interface"
Length of output: 5975
Script:
#!/bin/bash
# Check translations for RESPIRATORY_SUPPORT
rg "RESPIRATORY_SUPPORT" public/locale/en.json -A 2
# Check if there are any other related translation keys
rg "RESPIRATORY_SUPPORT|VENTILATOR_INTERFACE" src/constants/ -A 2
Length of output: 739
Script:
#!/bin/bash
# Find the constants file containing RESPIRATORY_SUPPORT
fd -t f -e ts -e tsx -e js -e jsx | xargs rg "RESPIRATORY_SUPPORT.*=.*\[" -A 5
Length of output: 888
|
|
||
| export const ConsultationVentilatorTab = (props: ConsultationTabProps) => { | ||
| const { consultationId } = props; | ||
| const { qParams, Pagination, resultsPerPage } = useFilters({ limit: 36 }); |
There was a problem hiding this comment.
💡 Codebase verification
Consider standardizing the pagination limit
The codebase shows inconsistent pagination limits across different components:
- 36 items in ConsultationVentilatorTab
- 16 items in another component
- 15 items in another component
- 12 items in two other components
This inconsistency suggests there's no standardized pagination limit across the application. The current implementation with 36 items significantly deviates from other components that use smaller limits (12-16 items), which could impact performance and user experience.
🔗 Analysis chain
Verify the pagination limit of 36 items.
The limit of 36 items per page seems arbitrary. Please confirm if this number was chosen based on specific requirements or if it should align with other pagination implementations in the application.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Search for other pagination limit implementations
rg -g '*.{ts,tsx}' 'useFilters.*limit:' --no-filename | sort | uniq
Length of output: 415
There was a problem hiding this comment.
It's 36 daily log events and not every event would have a corresponding ventilator table entry.
There was a problem hiding this comment.
@Jacobjeevan, understood. Thank you for the clarification. I've noted this for future reviews.
(_/)
(•_•)
/ ?
✏️ Learnings added
Learnt from: Jacobjeevan
PR: ohcnetwork/care_fe#8781
File: src/components/Facility/ConsultationDetails/ConsultationVentilatorTab.tsx:14-14
Timestamp: 2024-11-08T09:25:33.310Z
Learning: In the `ConsultationVentilatorTab`, the pagination limit is set to 36 because not every event corresponds to a ventilator table entry.
Note: Learnings are effective only in the context of similar code segments. To apply general coding guidelines, please configure review instructions. You can manage existing learnings in the app.
| const getGraphData = (dailyRoundsData?: DailyRoundsModel[]) => { | ||
| const graphData: graphDataProps = {}; | ||
| const graphDataCount = dailyRoundsData?.length ?? 0; | ||
| if (dailyRoundsData) { | ||
| dailyRoundsData.forEach((currentRound: DailyRoundsModel) => { | ||
| // @ts-expect-error taken_at should always be available | ||
| graphData[currentRound.taken_at] = { | ||
| bilateral_air_entry: currentRound.bilateral_air_entry, | ||
| etco2: currentRound.etco2, | ||
| id: currentRound.id, | ||
| ventilator_fio2: currentRound.ventilator_fio2, | ||
| ventilator_mean_airway_pressure: | ||
| currentRound.ventilator_mean_airway_pressure, | ||
| ventilator_oxygen_modality_flow_rate: | ||
| currentRound.ventilator_oxygen_modality_flow_rate, | ||
| ventilator_oxygen_modality_oxygen_rate: | ||
| currentRound.ventilator_oxygen_modality_oxygen_rate, | ||
| ventilator_peep: currentRound.ventilator_peep | ||
| ? Number(currentRound.ventilator_peep) | ||
| : null, | ||
| ventilator_pip: currentRound.ventilator_pip, | ||
| ventilator_pressure_support: currentRound.ventilator_pressure_support, | ||
| ventilator_resp_rate: currentRound.ventilator_resp_rate, | ||
| ventilator_spo2: currentRound.ventilator_spo2, | ||
| ventilator_tidal_volume: currentRound.ventilator_tidal_volume, | ||
| }; | ||
| }); | ||
| if (res && res.ok && data) { | ||
| setResults(data.results); | ||
| setTotalCount(data.count); | ||
| } | ||
| }; | ||
| } | ||
| return { graphData, graphDataCount }; | ||
| }; |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Improve type safety and error handling in data processing.
The function has several areas for improvement:
- Uses
@ts-expect-errorto suppress type checking - Lacks validation for numeric values
- Missing error logging
const getGraphData = (dailyRoundsData?: DailyRoundsModel[]) => {
const graphData: graphDataProps = {};
const graphDataCount = dailyRoundsData?.length ?? 0;
if (dailyRoundsData) {
dailyRoundsData.forEach((currentRound: DailyRoundsModel) => {
- // @ts-expect-error taken_at should always be available
- graphData[currentRound.taken_at] = {
+ if (!currentRound.taken_at) {
+ console.warn(`Missing taken_at for round: ${currentRound.id}`);
+ return;
+ }
+ graphData[currentRound.taken_at] = {
bilateral_air_entry: currentRound.bilateral_air_entry,
- etco2: currentRound.etco2,
+ etco2: typeof currentRound.etco2 === 'number' ? currentRound.etco2 : null,
// ... other properties with similar validation
};
});
}
return { graphData, graphDataCount };
};Committable suggestion skipped: line range outside the PR's diff.
|
@Jacobjeevan Your efforts have helped advance digital healthcare and TeleICU systems. 🚀 Thank you for taking the time out to make CARE better. We hope you continue to innovate and contribute; your impact is immense! 🙌 |
Proposed Changes
Take a look at the font styling for the label, can adjust as needed; could do the same for label position as well (check the #8264 thread for examples).
@ohcnetwork/care-fe-code-reviewers
Merge Checklist
Summary by CodeRabbit
Release Notes
New Features
ConsultationVentilatorTabwith data fetching, loading states, and pagination for ventilator reports.VentilatorTableto display ventilator data with improved formatting and internationalization support.VentilatorPlotfor better data visualization.Improvements
Bug Fixes
BinaryChronologicalChartcomponent.Chores