xow is a Linux user mode driver for the Xbox One wireless dongle.
It communicates with the dongle via libusb and provides joystick input through the uinput kernel module.
The input mapping is based on existing kernel drivers like xpad.
NOTE: xow is still at a VERY EARLY stage of development. Do not be surprised if it does not work at all. In case of problems, please open an issue with all the relevant details (dongle version, controller version, logs, captures, etc.) and I will see what I can do.
xow supports both versions of the wireless dongle (slim and bulky one). The following Xbox One controllers are currently compatible with the driver:
| Model number | Year | Additional information | Status |
|---|---|---|---|
| 1537 | 2013 | Original controller | Broken |
| 1697 | 2015 | Added audio jack | Working |
| 1708 | 2016 | Bluetooth functionality | Working |
Elite controllers may be added in the future.
Ideally, other applications should be able to query/set these things.
The Windows driver goes through all channels and reads MT_CH_IDLE and MT_CH_BUSY to select the best one.
I have not figured out what these values are and how they are used to determine the least noisy channel.
Any help/suggestions regarding the planned features is much appreciated.
Feel free to create prebuilt releases of xow for any package repository you like. Ideally, I would like to provide binaries for every major Linux distribution.
Clone the repository (necessary for version tagging to work):
git clone https://github.com/medusalix/xow
Make sure that libusb is installed on your machine. You can build xow using the following command:
make BUILD=RELEASE
NOTE: Please use BUILD=DEBUG when asked for your debug logs.
Option 1 (recommended): Install xow as a systemd service (starts xow at boot time):
sudo make install
sudo systemctl enable xow
sudo systemctl start xow
Option 2: Run xow manually:
sudo ./xow
Running xow without make install is not recommended (except for debugging) as it requires root privileges to operate.
- Buttons/triggers/sticks are mapped incorrectly
- Try the options listed on this page to remap your inputs.
- Input from the sticks is jumping around
- Try the options listed on this page to set your deadzones.
- Controller does not connect to the dongle
- See supported devices. Do a packet capture and open an issue.
NOTE: Please refrain from opening issues concerning input remapping, deadzones or game compatibility, as these topics are outside the scope of this project.
The dongle's wireless chip (MT76xx) handles the WLAN connection with individual controllers.
The packet format follows Microsoft's undisclosed GIP (Game Input Protocol) specification.
Most of the reverse engineering was done by capturing the communication between the dongle and a Windows PC using Wireshark.
As no datasheets for this chip are publicly available, I have used datasheets of similar wireless radios for assistance.
Special thanks to the authors of Linux' mt76 kernel driver.
It would have been impossible for me to create this driver without mt76's source code.
If anyone has a greater understanding of the GIP or the weird quirks I had to add to make the driver work (like initGain), please contact me.