Provides an improved dump1090-fa webinterface
- Improved adjustable history
- Show All Tracks much faster than original with many planes
- Multiple Maps available
- Map can be dimmed/darkened
- Multiple aircraft can be selected
- Labels with the callsign can be switched on and off
See the bottom of the page for screenshots
See the bottom of this page or the LICENSE for details. While striving not to disrupt an existing Raspbian / Debian / Ubuntu installation, this can't be guaranteed. This install script assumes Raspbian / Debian / Ubunutu and will not work on systems without apt.
tar1090 is not a dump1090 replacement, it merely adds an additional webinterface for an existing dump1090-fa or readsb installation. dump1090-mutability installations should work as well, aircraft details will be limited though.
sudo bash -c "$(wget -nv -O - https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh)"
Click the following URL and replace the IP address with address of your Raspberry Pi:
Check further down or keyboard shortcuts.
sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh)"
Configuration should be preserved.
Edit the configuration file to change the interval in seconds and number of history files saved:
sudo nano /etc/default/tar1090
Ctrl-x to exit, y (yes) and enter to save.
Apply the configuration:
sudo systemctl restart tar1090
The duration of the history in seconds can be calculated as interval times history_size.
Remove the // at the start of a line, otherwise the setting will not be used.
sudo nano /usr/local/share/tar1090/html/config.js
Ctrl-x to exit, y (yes) and enter to save. Then Ctrl-F5 to refresh the web interface in the browser.
If you somehow broke the interface or want the default config back:
sudo rm /usr/local/share/tar1090/html/config.js
Then run the install script again.
The commit log on the github page is the only form of change log. If you can't find the commit log or don't understand what it means, you have 3 options:
- Assume there is no update and use the currently installed version.
- Run the update script as provided above and let it surprise you!
- Complain about the lack of a change log and be mocked.
While i make this interface available for others to install and hope you like it, i maintain this interface mainly for users who are curious and can figure it out themselves. Documentation and explanation is time consuming to do and as such i choose to limit it to the essential.
If you think you have found a bug, open an issue here on github. Please check all the buttons and read all the tooltips before you do. Try deleting the browser cache for the tar1090 page.
# ENABLE:
sudo sed -i -e 's?.*flightawareLinks.*?flightawareLinks = true;?' /usr/local/share/tar1090/html/config.js
# ENABLE if the above doesn't work (updated from previous version)
echo 'flightawareLinks = true;' | sudo tee -a /usr/local/share/tar1090/html/config.js
# DISABLE:
sudo sed -i -e 's?.*flightawareLinks.*?flightawareLinks = false;?' /usr/local/share/tar1090/html/config.js
Then Ctrl-F5 to refresh the web interface in the browser.
This is the relevant part in the configuration file:
# Change to yes to enable UAT/978 display in tar1090
ENABLE_978=no
# If running dump978-fa on another computer, modify the IP-address as appropriate.
URL_978="http://127.0.0.1/skyaware978"
Open and save as described above in the Configuration section. Follow the instructions in the file.
tar1090 running on the same pi as the skyaware978/dump978-fa:
echo /run/skyaware978 tar1090 | sudo tee /etc/default/tar1090_instances
After that run the install script and it should work. 978 should be disabled in the config file for this configuration. UAT traffic will be displayed as ADS-B, this can't be avoided.
wget -q -O /tmp/install.sh https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh
sudo bash /tmp/install.sh /run/combine1090
sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/tar1090/master/uninstall.sh)"
- Q and E zoom out and in.
- A and D move West and East.
- W and S move North and South.
- C or Esc clears the selection.
- M toggles multiselect.
- T selects all aircraft
- B toggle map brightness
The script can install multiple instances, this is accomplished by first editing /etc/default/tar1090_instances:
On each line there must be one instance. First on the line the source directory where the aircraft.json is located. Second on the line the name where you want to access the according website. (http://pi/tar1090 or http://pi/combo or http://pi/978 in this example)
The main instance needs to be included in this file.
Example file:
/run/dump1090-fa tar1090
/run/combine1090 combo
/run/skyaware978 978
After saving that file, just run the install script and it will install/update all instances.
The run folder and systemd service will be called tar1090-combo and tar1090-978 in this example file. The main instance is the exception to that rule, having systemd service and run directory called just tar1090.
For example removing the instance with the name combo and 978:
First remove the corresponding line from /etc/default/tar1090_instances and
save the file so when you update it doesn't get installed again.
Then run the following command adapted to your instance name, you'll need to include the tar1090- which is automatically added for the service names:
sudo bash /usr/local/share/tar1090/uninstall.sh tar1090-combo
sudo bash /usr/local/share/tar1090/uninstall.sh tar1090-978
If the instance was installed with the old method without the tar1090_instances file, you'll have to try without the tar1090- before the combo, like this:
sudo bash /usr/local/share/tar1090/uninstall.sh combo
sudo bash /usr/local/share/tar1090/uninstall.sh 978
Placing tar1090 on port 8504:
sudo cp /usr/local/share/tar1090/95-tar1090-otherport.conf /etc/lighttpd/conf-enabled
sudo systemctl restart lighttpd
Placing tar1090 at / instead of /tar1090:
sudo cp /usr/local/share/tar1090/99-tar1090-webroot.conf /etc/lighttpd/conf-enabled
sudo systemctl restart lighttpd
Note 1: This will only work if you are using dump1090-fa and the default install
Note 2: if those cause lighttpd not to start for any reason some other lighttpd configuration is conflicting. To solve the problem just delete the configuration you copied there:
sudo rm /etc/lighttpd/conf-enabled/95-tar1090-otherport.conf
sudo rm /etc/lighttpd/conf-enabled/99-tar1090-webroot.conf
sudo systemctl restart lighttpd
If nginx is installed, the install script should give you a configuration file you can include. The configuration needs to go into the appropriate server { } section and looks something like this in case you are interested:
location /tar1090/data/ {
alias /run/dump1090-fa/;
}
location /tar1090/chunks/ {
alias /run/tar1090/;
location ~* \.gz$ {
add_header Cache-Control "must-revalidate";
add_header Content-Type "application/json";
add_header Content-Encoding "gzip";
}
}
location /tar1090 {
try_files $uri $uri/ =404;
alias /usr/local/share/tar1090/html/;
}
If you are using another dump1090 fork, change /run/dump1090-fa in this section:
location /tar1090/data/ {
alias /run/dump1090-fa/;
}
For a day or so i had a bug in the install script turning symbolic links in /etc/lighttpd/conf-enabled into copies of the files they were pointing to.
This can cause some other issues with my install script which fiddles with the lighttpd config files to make mod_setenv work.
Anyhow if just rerunning the install script does not fix your history loading issue, you can try this:
cd /etc/lighttpd/conf-enabled
for i in *; do if [ -f "../conf-available/$i" ]; then sudo ln -s -f "../conf-available/$i" $i; fi; done
After that rerun the install script. If you still have history loading issues, get back to me via the github issues or the various forums i frequent.
- BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.