NOTICE: This package has been deprecated in favor of raspi-soft-pwm
Raspi PWM is part of the Raspi.js suite that provides access to the hardware PWM.
If you have a bug report, feature request, or wish to contribute code, please be sure to check out the Raspi IO Contributing Guide.
- Raspberry Pi Model B Rev 1 or newer (sorry Model A users)
- Raspbian Jessie or newer
- Node-RED works, but can be finicky and difficult to debug.
- See nebrius/raspi-io#24 for more info about support for other OSes
- Node 6.4.0 or newer
Detailed instructions for getting a Raspberry Pi ready for NodeBots, including how to install Node.js, can be found in the wiki
First, be sure that you have installed raspi.
Install with npm:
npm install raspi-pwmNote: this project is written in TypeScript and includes type definitions in the package.json file. This means that if you want to use it from TypeScript, you don't need to install a separate @types module.
In TypeScript/ES6:
import { init } from 'raspi';
import { PWM } from 'raspi-pwm';
init(() => {
const led = new PWM('P1-12');
led.write(0.5); // 50% Duty Cycle, half brightness
});In JavaScript:
const raspi = require('raspi');
const pwm = require('raspi-pwm');
raspi.init(() => {
const led = new pwm.PWM('P1-12');
led.write(0.5); // 50% Duty Cycle, aka half brightness
});The pins on the Raspberry Pi are a little complicated. There are multiple headers on some Raspberry Pis with extra pins, and the pin numbers are not consistent between Raspberry Pi board versions.
To help make it easier, you can specify pins in three ways. The first is to specify the pin by function, e.g. 'GPIO18'. The second way is to specify by pin number, which is specified in the form "P[header]-[pin]", e.g. 'P1-7'. The final way is specify the Wiring Pi virtual pin number, e.g. 7. If you specify a number instead of a string, it is assumed to be a Wiring Pi number.
Be sure to read the full list of pins on the supported models of the Raspberry Pi.
Raspberry Pi Model B Rev 2 and older versions of the Raspberry Pi only expose one PWM port on pin P1-12, so be sure to always use that port (or leave it as the default). The Raspberry Pi Model B+ and newer exposes two PWM ports.
On newer Raspberry Pi's, these two PWM ports can be accessed via four different pins. PWM0 can be accessed on either pin P1-12 or P1-32, and PWM1 can be accessed on either pin P1-33 or P1-35. Each PWM cannot be accessed on both pins though.
If you try to run the following code, which initializes both PWM0 ports, you will get an exception.
const raspi = require('raspi');
const pwm = require('raspi-pwm');
raspi.init(() => {
const led1 = new pwm.PWM('P1-12');
const led2 = new pwm.PWM('P1-32');
});Instantiates a new PWM instance on the given pin. Note that PWM is limited to only 1 pin on the Model A/B and 2 pins on the A+/B+/2/Zero. On the A/B, the PWM pin is exposed on GPIO18. The A+/B+/2 is a little more complicated. The first PWM is exposed on two pins, GPIO18 and GPIO12. This PWM can only be active on one of these pins at a time, however, so choose carefully. The second PWM pin on the A+/B+/2/Zero is exposed on GPIO19. Check the wiring information wiki for more information.
Arguments:
| Argument | Type | Description | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| config (optional) | Number | String | Object | The configuration for the PWM pin. If the config is a number or string, it is assumed to be the pin number for the peripheral. If it is an object, the following properties are supported: | |||||||||
|
|||||||||||
A number representing the frequency initialization value, in Hz. If a value for frequency was passed to the constructor, it is reflected back here. If no value for frequency was passed to the constructor, then this reflects the default frequency value of 50.
A number representing the last written dutyCycle. If this property is read before a value is written, 0 is returned.
Sets the duty cycle for the PWM output, a floating point value between 0 and 1.
Arguments:
| Argument | Type | Description |
|---|---|---|
| dutyCycle | Number | The duty cycle for the PWM to set, must be a floating point number between 0 and 1 |
Returns: None
Note: The PWM does not start outputting a signal until write is called for the first time.
The MIT License (MIT)
Copyright (c) 2014-2017 Bryan Hughes bryan@nebri.us
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.