PrusaSlicer+BOSS Development Build

PrusaSlicer + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Development Build - Use at your own risk ⚠⚠⚠

Additional Features & Backports

• Percentage based extrusion width based on nozzle diameter
• Small area infill flow compensation
• Configurable bridge density
• Configurable solid infill pattern
• Configurable top and bottom flow ratio
• Rotate on initial import
• Show seams by default
• Port alternate extra perimeter feature from Cura
• Advanced Jerk (Square Corner Velocity) and Minimum Cruise Ratio control
• Improved 3D Honeycomb infill (prusa3d#6434 | SoftFever/OrcaSlicer#4425)
• Ported CrossHatch Infill from BambuStudio

PrusaSlicer 2.8.1 (BOSS)

PrusaSlicer 2.8.1 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.8.1 release notes

Additional Features & Backports

• Percentage based extrusion width based on nozzle diameter
• Small area infill flow compensation
• Configurable bridge density
• Configurable solid infill pattern
• Configurable top and bottom flow ratio
• Rotate on initial import
• Show seams by default
• Port alternate extra perimeter feature from Cura
• Advanced Jerk (Square Corner Velocity) and Minimum Cruise Ratio control
• Improved 3D Honeycomb infill (prusa3d#6434 | SoftFever/OrcaSlicer#4425)
• Ported CrossHatch Infill from BambuStudio

PrusaSlicer 2.8.1-rc1 (BOSS)

PrusaSlicer 2.8.1-rc1 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.8.1-rc1 release notes

Additional Features & Backports

• Percentage based extrusion width based on nozzle diameter
• Small area infill flow compensation
• Configurable bridge density
• Configurable solid infill pattern
• Configurable top and bottom flow ratio
• Rotate on initial import
• Show seams by default
• Port alternate extra perimeter feature from Cura
• Advanced Jerk (Square Corner Velocity) and Minimum Cruise Ratio control
• Improved 3D Honeycomb infill (prusa3d#6434 | SoftFever/OrcaSlicer#4425)
• Ported CrossHatch Infill from BambuStudio

PrusaSlicer 2.8.0 (BOSS)

PrusaSlicer 2.8.0 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.8.0 release notes

Breaking changes

Filament shrinkage, chamber temperatures and single perimeters have been merged into mainline PrusaSlicer. Please check your configs and update as needed, some of the options are named differently and need to be set again.

New Features

• CrossHatch infill pattern from BambuSlicer
• Bottom and top flow ratio adjustable
• Calculate percentage based extrusion width based on nozzle diameter
• Migrate from accel-to-decel to minimum cruise ratio

Additional Features & Backports

• Improved 3D Honeycomb infill (prusa3d#6434 | SoftFever/OrcaSlicer#4425)
• Port alternate extra perimeter feature from Cura
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Small area infill flow compensation (Flow Model v0.2.1)
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Show seams by default

Merged into Upstream

• Filament Shrinkage compensation
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Chamber temperature per filament

PrusaSlicer 2.7.4 (BOSS)

PrusaSlicer 2.7.4 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.4 release notes

New Features

• Improved 3D Honeycomb infill (prusa3d#6434 | SoftFever/OrcaSlicer#4425)
• Port alternate extra perimeter feature from Cura

Additional Features & Backports

• Filament Shrinkage compensation
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default

PrusaSlicer 2.7.3 (BOSS)

PrusaSlicer 2.7.3 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Unsigned Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.3 release notes

Backports:

• Filament Shrinkage compensation
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default

PrusaSlicer 2.7.2 (BOSS)

PrusaSlicer 2.7.2 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Unsigned Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.2 release notes

New Features

• Only single perimeter on first layer (Arachne)
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Filament Shrinkage compensation

Backports:

• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default

PrusaSlicer 2.7.2-rc2 (BOSS)

PrusaSlicer 2.7.2-rc2 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Unsigned Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.2-rc2 release notes

New Features

• Only single perimeter on first layer (Arachne)
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Filament Shrinkage compensation

Backports:

• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default

PrusaSlicer 2.7.2-rc1 (BOSS)

PrusaSlicer 2.7.2-rc1 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Unsigned Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.2-rc1 release notes

New Features

• Only single perimeter on first layer (Arachne)
• Advanced Jerk (Square Corner Velocity) and Accel-to-Decel control
• Filament Shrinkage compensation

Backports:

• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default

PrusaSlicer 2.7.2-alpha2 (BOSS)

PrusaSlicer 2.7.2-alpha2 + Best Of SuperSlicer + Small Area Infill Flow Compensation

⚠⚠⚠ Unsigned Development Build - Use at your own risk ⚠⚠⚠

PrusaSlicer 2.7.2-alpha2 release notes

Backports:

• Small area infill flow compensation (Flow Model v0.2.1)
• Only single perimeters on top surface (Classic & Arachne)
• Only single perimeters on first layer
• Configurable bridge density
• Configurable solid infill pattern
• Rotate on initial import
• Chamber temperature per filament
• Show seams by default