[PATCH] PCDP: handle tables that don't supply baud rate

The HCDP specs (i.e., PCDP revision < 3) allow zero as a default value for
baud rate and data bits.  So if firmware doesn't supply them, let
early_serial_console_init() probe for them rather than telling it the baud
rate is zero.

Also, update the URL for the PCDP spec.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/firmware/pcdp.c

@@ -23,12 +23,15 @@ setup_serial_console(struct pcdp_uart *uart)
 {
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	int mmio;
-	static char options[64];
+	static char options[64], *p = options;
 
 	mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
-	snprintf(options, sizeof(options), "console=uart,%s,0x%lx,%lun%d",
-		mmio ? "mmio" : "io", uart->addr.address, uart->baud,
-		uart->bits ? uart->bits : 8);
+	p += sprintf(p, "console=uart,%s,0x%lx",
+		mmio ? "mmio" : "io", uart->addr.address);
+	if (uart->baud)
+		p += sprintf(p, ",%lu", uart->baud);
+	if (uart->bits)
+		p += sprintf(p, "n%d", uart->bits);
 
 	return early_serial_console_init(options);
 #else

drivers/firmware/pcdp.h

@@ -2,7 +2,7 @@
  * Definitions for PCDP-defined console devices
  *
  * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
- * v2.0:  http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf
+ * v2.0:  http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
  *
  * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
  *	Khalid Aziz <khalid.aziz@hp.com>