vim-patch:036986f1507d

Update runtime files.

vim/vim@036986f

runtime/doc/editing.txt

@@ -236,7 +236,7 @@ If you want to keep the changed buffer without saving it, switch on the
 
 							*:vie* *:view*
 :vie[w][!] [++opt] [+cmd] file
-			When used in Ex mode: Leave |Ex mode|, go back to
+			When used in Ex mode: Leave |Ex-mode|, go back to
 			Normal mode.  Otherwise same as |:edit|, but set
 			'readonly' option for this buffer.
 

runtime/doc/eval.txt

@@ -1870,6 +1870,8 @@ v:termresponse	The escape sequence returned by the terminal for the DA
 
 					*v:testing* *testing-variable*
 v:testing	Must be set before using `test_garbagecollect_now()`.
+		Also, when set certain error messages won't be shown for 2
+		seconds. (e.g. "'dictionary' option is empty") 
 
 				*v:this_session* *this_session-variable*
 v:this_session	Full filename of the last loaded or saved session file.  See

runtime/doc/map.txt

@@ -556,7 +556,8 @@ Upper and lowercase differences are ignored.
 
 							*map-comments*
 It is not possible to put a comment after these commands, because the '"'
-character is considered to be part of the {lhs} or {rhs}.
+character is considered to be part of the {lhs} or {rhs}. However, one can
+use |", since this starts a new, empty command with a comment.
 
 							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next

runtime/doc/motion.txt

@@ -184,7 +184,7 @@ l		or					*l*
 
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
-			[count - 1] lines downward |inclusive|.
+			[count - 1] lines downward. |inclusive| motion.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor

runtime/doc/options.txt

@@ -959,8 +959,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	wildmode    More matches in |cmdline-completion| available
 		    (depends on the 'wildmode' setting).
 
-	This is most useful, to fine tune when in insert mode the bell should
-	be rung. For normal mode and ex commands, the bell is often rung to
+	This is most useful to fine tune when in Insert mode the bell should
+	be rung. For Normal mode and Ex commands, the bell is often rung to
 	indicate that an error occurred. It can be silenced by adding the
 	"error" keyword.
 
@@ -3099,6 +3099,28 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	The builtin |highlight-groups| cannot be changed.
 
+						*'history'* *'hi'*
+'history' 'hi'		number	(Vim default: 10000, Vi default: 0)
+			global
+	A history of ":" commands, and a history of previous search patterns
+	is remembered.  This option decides how many entries may be stored in
+	each of these histories (see |cmdline-editing|).
+	The maximum value is 10000.
+
+					 *'hkmap'* *'hk'* *'nohkmap'* *'nohk'*
+'hkmap' 'hk'		boolean (default off)
+			global
+	When on, the keyboard is mapped for the Hebrew character set.
+	Normally you would set 'allowrevins' and use CTRL-_ in insert mode to
+	toggle this option.  See |rileft.txt|.
+
+				 *'hkmapp'* *'hkp'* *'nohkmapp'* *'nohkp'*
+'hkmapp' 'hkp'		boolean (default off)
+			global
+	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
+	This is useful if you have a non-Hebrew keyboard.
+	See |rileft.txt|.
+
 				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
 'hlsearch' 'hls'	boolean	(default on)
 			global
@@ -3122,28 +3144,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	You can specify whether the highlight status is restored on startup
 	with the 'h' flag in 'shada' |shada-h|.
 
-						*'history'* *'hi'*
-'history' 'hi'		number	(Vim default: 10000, Vi default: 0)
-			global
-	A history of ":" commands, and a history of previous search patterns
-	is remembered.  This option decides how many entries may be stored in
-	each of these histories (see |cmdline-editing|).
-	The maximum value is 10000.
-
-					 *'hkmap'* *'hk'* *'nohkmap'* *'nohk'*
-'hkmap' 'hk'		boolean (default off)
-			global
-	When on, the keyboard is mapped for the Hebrew character set.
-	Normally you would set 'allowrevins' and use CTRL-_ in insert mode to
-	toggle this option.  See |rileft.txt|.
-
-				 *'hkmapp'* *'hkp'* *'nohkmapp'* *'nohkp'*
-'hkmapp' 'hkp'		boolean (default off)
-			global
-	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
-	This is useful if you have a non-Hebrew keyboard.
-	See |rileft.txt|.
-
 						*'icon'* *'noicon'*
 'icon'			boolean	(default off, on when title can be restored)
 			global

runtime/doc/pattern.txt

@@ -856,8 +856,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	inside the Visual area put it at the start and just before the end of
 	the pattern, e.g.: >
 		/\%Vfoo.*ba\%Vr
-<	This works if "foo bar" (or more) was Visually selected. This: >
-		/\%Vfoo.*ba\%Vr
+<	This also works if only "foo bar" was Visually selected. This: >
+		/\%Vfoo.*bar\%V
 <	would match "foo bar" if the Visual selection continues after the "r".
 	Only works for the current buffer.
 

runtime/doc/quickfix.txt

@@ -32,10 +32,13 @@ The 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
 						*location-list* *E776*
-A location list is similar to a quickfix list and contains a list of positions
-in files.  A location list is associated with a window and each window can
-have a separate location list.  A location list can be associated with only
-one window.  The location list is independent of the quickfix list.
+A location list is a window-local quickfix list. You get one after commands
+like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
+location list instead of a quickfix list as the corresponding `:vimgrep`,
+`:grep`, `:helpgrep`, `:make` do.
+A location list is associated with a window and each window can have a
+separate location list.  A location list can be associated with only one
+window.  The location list is independent of the quickfix list.
 
 When a window with a location list is split, the new window gets a copy of the
 location list.  When there are no longer any references to a location list,

runtime/doc/usr_02.txt

@@ -543,7 +543,7 @@ Summary: 					*help-summary*  >
 8) Ex-commands always start with ":", so to go to the :s command help: >
 	:help :s
 
-9) Commands specifically for debugging start with ">".  To go to to the help
+9) Commands specifically for debugging start with ">".  To go to the help
    for the "cont" debug command: >
 	:help >cont
 

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Mar 04
+" Last Change:	2017 Mar 13
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -1362,6 +1362,9 @@ endfunc
 " Not Quite C
 au BufNewFile,BufRead *.nqc			setf nqc
 
+" NSE - Nmap Script Engine - uses Lua syntax
+au BufNewFile,BufRead *.nse			setf lua
+
 " NSIS
 au BufNewFile,BufRead *.nsi,*.nsh		setf nsis
 
@@ -2277,7 +2280,7 @@ au BufNewFile,BufRead .tidyrc,tidyrc		setf tidy
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
 " tmux configuration
-au BufNewFile,BufRead tmux*.conf		setf tmux
+au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
 
 " TPP - Text Presentation Program
 au BufNewFile,BufReadPost *.tpp			setf tpp

runtime/ftplugin/hamster.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:    Hamster Script
 " Version:     2.0.6.0
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
-" Last Change: Wed Nov 08 2006 12:03:09 PM
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
+" Last Change: 2017 Mar 07
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,6 +13,7 @@ endif
 let b:did_ftplugin = 1
 
 let s:cpo_save = &cpo
+set cpo&vim
 set cpo-=C
 
 let b:undo_ftplugin = "setl fo< com< tw< commentstring<"

runtime/ftplugin/sql.vim

@@ -1,8 +1,8 @@
 " SQL filetype plugin file
 " Language:    SQL (Common for Oracle, Microsoft SQL Server, Sybase)
-" Version:     11.0
+" Version:     12.0
 " Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change: 2013 May 13
+" Last Change: 2017 Mar 07
 " Download:    http://vim.sourceforge.net/script.php?script_id=454
 
 " For more details please use:
@@ -36,6 +36,14 @@
 "
 " History
 "
+" Version 12.0 (April 2013)
+"
+" NF: Added support for "BEGIN TRY ... END TRY ... BEGIN CATCH ... END CATCH
+" BF: This plugin is designed to be used with other plugins to enable the 
+"     SQL completion with Perl, Python, Java, ...  The loading mechanism 
+"     was not checking if the SQL objects were created, which can lead to 
+"     the plugin not loading the SQL support.
+"
 " Version 11.0 (May 2013)
 "
 " NF: Updated to use SyntaxComplete's new regex support for syntax groups.
@@ -80,15 +88,17 @@
 
 
 " Only do this when not done yet for this buffer
-if exists("b:did_ftplugin")
-  finish
+" This ftplugin can be used with other ftplugins.  So ensure loading
+" happens if all elements of this plugin have not yet loaded.
+if exists("b:did_ftplugin") && exists("b:current_ftplugin") && b:current_ftplugin == 'sql'
+    finish
 endif
 
 let s:save_cpo = &cpo
 set cpo&vim
 
 " Disable autowrapping for code, but enable for comments
-" t	Auto-wrap text using textwidth
+" t     Auto-wrap text using textwidth
 " c     Auto-wrap comments using textwidth, inserting the current comment
 "       leader automatically.
 setlocal formatoptions-=t
@@ -171,6 +181,9 @@ if !exists("*SQL_SetType")
         if exists("b:current_syntax")
             " echomsg 'SQLSetType - clearing syntax'
             syntax clear
+            if exists("b:current_syntax")
+                unlet b:current_syntax
+            endif
         endif
         if exists("b:did_indent")
             " echomsg 'SQLSetType - clearing indent'
@@ -187,7 +200,7 @@ if !exists("*SQL_SetType")
         " Do not specify a buffer local variable if it is
         " the default value
         if new_sql_type == 'sql'
-          let new_sql_type = 'sqloracle'
+            let new_sql_type = 'sqloracle'
         endif
         let b:sql_type_override = new_sql_type
 
@@ -234,25 +247,26 @@ if exists("b:sql_type_override")
     " echo 'sourcing buffer ftplugin/'.b:sql_type_override.'.vim'
     if globpath(&runtimepath, 'ftplugin/'.b:sql_type_override.'.vim') != ''
         exec 'runtime ftplugin/'.b:sql_type_override.'.vim'
-    " else
-    "     echomsg 'ftplugin/'.b:sql_type_override.' not exist, using default'
+        " else
+        "     echomsg 'ftplugin/'.b:sql_type_override.' not exist, using default'
     endif
 elseif exists("g:sql_type_default")
     " echo 'sourcing global ftplugin/'.g:sql_type_default.'.vim'
     if globpath(&runtimepath, 'ftplugin/'.g:sql_type_default.'.vim') != ''
         exec 'runtime ftplugin/'.g:sql_type_default.'.vim'
-    " else
-    "     echomsg 'ftplugin/'.g:sql_type_default.'.vim not exist, using default'
+        " else
+        "     echomsg 'ftplugin/'.g:sql_type_default.'.vim not exist, using default'
     endif
 endif
 
 " If the above runtime command succeeded, do not load the default settings
-if exists("b:did_ftplugin")
-  finish
+" as they should have already been loaded from a previous run.
+if exists("b:did_ftplugin") && exists("b:current_ftplugin") && b:current_ftplugin == 'sql'
+    finish
 endif
 
 let b:undo_ftplugin = "setl comments< formatoptions< define< omnifunc<" .
-		    \ " | unlet! b:browsefilter b:match_words"
+            \ " | unlet! b:browsefilter b:match_words"
 
 " Don't load another plugin for this buffer
 let b:did_ftplugin     = 1
@@ -261,7 +275,7 @@ let b:current_ftplugin = 'sql'
 " Win32 can filter files in the browse dialog
 if has("gui_win32") && !exists("b:browsefilter")
     let b:browsefilter = "SQL Files (*.sql)\t*.sql\n" .
-	  \ "All Files (*.*)\t*.*\n"
+                \ "All Files (*.*)\t*.*\n"
 endif
 
 " Some standard expressions for use with the matchit strings
@@ -312,14 +326,24 @@ if !exists("b:match_words")
     " WHEN column_not_found THEN
     " WHEN OTHERS THEN
     "
+    " begin try
+    " end try
+    " begin catch
+    " end catch
+    "
     " create[ or replace] procedure|function|event
-                " \ '^\s*\<\%(do\|for\|while\|loop\)\>.*:'.
+    " \ '^\s*\<\%(do\|for\|while\|loop\)\>.*:'.
 
     " For ColdFusion support
     setlocal matchpairs+=<:>
     let b:match_words = &matchpairs .
-		\ ',\<begin\>:\<end\>\W*$,'.
-		\
+                \ ',\%(\<begin\)\%(\s\+\%(try\|catch\)\>\)\@!:\<end\>\W*$,'.
+                \
+                \ '\<begin\s\+try\>:'.
+                \ '\<end\s\+try\>:'.
+                \ '\<begin\s\+catch\>:'.
+                \ '\<end\s\+catch\>,'.
+                \
                 \ s:notend . '\<if\>:'.
                 \ '\<elsif\>\|\<elseif\>\|\<else\>:'.
                 \ '\<end\s\+if\>,'.
@@ -339,14 +363,14 @@ if !exists("b:match_words")
                 \ '\%(\<create\s\+' . s:or_replace . '\)\?'.
                 \ '\%(function\|procedure\|event\):'.
                 \ '\<returns\?\>'
-                " \ '\<begin\>\|\<returns\?\>:'.
-                " \ '\<end\>\(;\)\?\s*$'
-                " \ '\<exception\>:'.s:when_no_matched_or_others.
-                " \ ':\<when\s\+others\>,'.
-		"
-                " \ '\%(\<exception\>\|\%('. s:notend . '\<case\>\)\):'.
-                " \ '\%(\<default\>\|'.s:when_no_matched_or_others.'\):'.
-                " \ '\%(\%(\<when\s\+others\>\)\|\<end\s\+case\>\),' .
+    " \ '\<begin\>\|\<returns\?\>:'.
+    " \ '\<end\>\(;\)\?\s*$'
+    " \ '\<exception\>:'.s:when_no_matched_or_others.
+    " \ ':\<when\s\+others\>,'.
+    "
+    " \ '\%(\<exception\>\|\%('. s:notend . '\<case\>\)\):'.
+    " \ '\%(\<default\>\|'.s:when_no_matched_or_others.'\):'.
+    " \ '\%(\%(\<when\s\+others\>\)\|\<end\s\+case\>\),' .
 endif
 
 " Define how to find the macro definition of a variable using the various

runtime/ftplugin/tmux.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
-" Language:	Tmux config
-" Maintainer:	Eric Pruitt <eric.pruitt@gmail.com>
-" Last Change:  2017 Mar 04
+" Language: 	tmux(1) configuration file
+" URL: 		https://github.com/ericpruitt/tmux.vim/
+" Maintainer: 	Eric Pruitt <eric.pruitt@gmail.com>
+" Last Changed: 2017 Mar 10
 
 if exists("b:did_ftplugin")
   finish