Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-next-2.6

MAINTAINERS

@@ -5127,6 +5127,7 @@ RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 M:	Ivo van Doorn <IvDoorn@gmail.com>
 M:	Gertjan van Wingerde <gwingerde@gmail.com>
+M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
@@ -6767,12 +6768,12 @@ S:	Maintained
 F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <luciano.coelho@nokia.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl12xx/
 F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER

drivers/net/wireless/ath/ath5k/Kconfig

@@ -40,6 +40,17 @@ config ATH5K_DEBUG
 
 	  modprobe ath5k debug=0x00000400
 
+config ATH5K_TRACER
+	bool "Atheros 5xxx tracer"
+	depends on ATH5K
+	depends on EVENT_TRACING
+	---help---
+	  Say Y here to enable tracepoints for the ath5k driver
+	  using the kernel tracing infrastructure.  Select this
+	  option if you are interested in debugging the driver.
+
+	  If unsure, say N.
+
 config ATH5K_AHB
 	bool "Atheros 5xxx AHB bus support"
 	depends on (ATHEROS_AR231X && !PCI)

drivers/net/wireless/ath/ath5k/ath5k.h

@@ -210,14 +210,9 @@
 /* Initial values */
 #define	AR5K_INIT_CYCRSSI_THR1			2
 
-/* Tx retry limits */
-#define AR5K_INIT_SH_RETRY			10
-#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
-/* For station mode */
-#define AR5K_INIT_SSH_RETRY			32
-#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
-#define AR5K_INIT_TX_RETRY			10
-
+/* Tx retry limit defaults from standard */
+#define AR5K_INIT_RETRY_SHORT			7
+#define AR5K_INIT_RETRY_LONG			4
 
 /* Slot time */
 #define AR5K_INIT_SLOT_TIME_TURBO		6
@@ -1057,7 +1052,9 @@ struct ath5k_hw {
 #define ah_modes		ah_capabilities.cap_mode
 #define ah_ee_version		ah_capabilities.cap_eeprom.ee_version
 
-	u32			ah_limit_tx_retries;
+	u8			ah_retry_long;
+	u8			ah_retry_short;
+
 	u8			ah_coverage_class;
 	bool			ah_ack_bitrate_high;
 	u8			ah_bwmode;
@@ -1067,7 +1064,6 @@ struct ath5k_hw {
 	u8			ah_ant_mode;
 	u8			ah_tx_ant;
 	u8			ah_def_ant;
-	bool			ah_software_retry;
 
 	struct ath5k_capabilities ah_capabilities;
 
@@ -1250,6 +1246,8 @@ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
 int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
 			    enum ath5k_tx_queue queue_type,
 			    struct ath5k_txq_info *queue_info);
+void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+				  unsigned int queue);
 u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
 void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
 int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);

drivers/net/wireless/ath/ath5k/attach.c

@@ -118,8 +118,8 @@ int ath5k_hw_init(struct ath5k_softc *sc)
 	ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
 	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
 	ah->ah_imr = 0;
-	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
-	ah->ah_software_retry = false;
+	ah->ah_retry_short = AR5K_INIT_RETRY_SHORT;
+	ah->ah_retry_long = AR5K_INIT_RETRY_LONG;
 	ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT;
 	ah->ah_noise_floor = -95;	/* until first NF calibration is run */
 	sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO;

drivers/net/wireless/ath/ath5k/base.c

@@ -61,6 +61,9 @@
 #include "debug.h"
 #include "ani.h"
 
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
 int ath5k_modparam_nohwcrypt;
 module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
@@ -1379,7 +1382,7 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
 	    sc->sbands[sc->curchan->band].bitrates[rxs->rate_idx].hw_value_short)
 		rxs->flag |= RX_FLAG_SHORTPRE;
 
-	ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
+	trace_ath5k_rx(sc, skb);
 
 	ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi);
 
@@ -1524,7 +1527,7 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
 	unsigned long flags;
 	int padsize;
 
-	ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
+	trace_ath5k_tx(sc, skb, txq);
 
 	/*
 	 * The hardware expects the header padded to 4 byte boundaries.
@@ -1573,7 +1576,7 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 static void
 ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb,
-			 struct ath5k_tx_status *ts)
+			 struct ath5k_txq *txq, struct ath5k_tx_status *ts)
 {
 	struct ieee80211_tx_info *info;
 	int i;
@@ -1625,6 +1628,7 @@ ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb,
 	else
 		sc->stats.antenna_tx[0]++; /* invalid */
 
+	trace_ath5k_tx_complete(sc, skb, txq, ts);
 	ieee80211_tx_status(sc->hw, skb);
 }
 
@@ -1661,7 +1665,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 
 			dma_unmap_single(sc->dev, bf->skbaddr, skb->len,
 					DMA_TO_DEVICE);
-			ath5k_tx_frame_completed(sc, skb, &ts);
+			ath5k_tx_frame_completed(sc, skb, txq, &ts);
 		}
 
 		/*
@@ -1803,8 +1807,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 		goto out;
 	}
 
-	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
-
 	ath5k_txbuf_free_skb(sc, avf->bbuf);
 	avf->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, avf->bbuf);
@@ -1899,6 +1901,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 			sc->opmode == NL80211_IFTYPE_MESH_POINT)
 		ath5k_beacon_update(sc->hw, vif);
 
+	trace_ath5k_tx(sc, bf->skb, &sc->txqs[sc->bhalq]);
+
 	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_start_tx_dma(ah, sc->bhalq);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
@@ -2399,7 +2403,8 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
 	/* set up multi-rate retry capabilities */
 	if (sc->ah->ah_version == AR5K_AR5212) {
 		hw->max_rates = 4;
-		hw->max_rate_tries = 11;
+		hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT,
+					 AR5K_INIT_RETRY_LONG);
 	}
 
 	hw->vif_data_size = sizeof(struct ath5k_vif);

drivers/net/wireless/ath/ath5k/caps.c

@@ -32,47 +32,48 @@
  */
 int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
 {
+	struct ath5k_capabilities *caps = &ah->ah_capabilities;
 	u16 ee_header;
 
 	/* Capabilities stored in the EEPROM */
-	ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+	ee_header = caps->cap_eeprom.ee_header;
 
 	if (ah->ah_version == AR5K_AR5210) {
 		/*
 		 * Set radio capabilities
 		 * (The AR5110 only supports the middle 5GHz band)
 		 */
-		ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
-		ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
-		ah->ah_capabilities.cap_range.range_2ghz_min = 0;
-		ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+		caps->cap_range.range_5ghz_min = 5120;
+		caps->cap_range.range_5ghz_max = 5430;
+		caps->cap_range.range_2ghz_min = 0;
+		caps->cap_range.range_2ghz_max = 0;
 
 		/* Set supported modes */
-		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
+		__set_bit(AR5K_MODE_11A, caps->cap_mode);
 	} else {
 		/*
 		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
 		 * XXX and from 2312 to 2732GHz. There are problems with the
 		 * XXX current ieee80211 implementation because the IEEE
 		 * XXX channel mapping does not support negative channel
 		 * XXX numbers (2312MHz is channel -19). Of course, this
-		 * XXX doesn't matter because these channels are out of range
-		 * XXX but some regulation domains like MKK (Japan) will
-		 * XXX support frequencies somewhere around 4.8GHz.
+		 * XXX doesn't matter because these channels are out of the
+		 * XXX legal range.
 		 */
 
 		/*
 		 * Set radio capabilities
 		 */
 
 		if (AR5K_EEPROM_HDR_11A(ee_header)) {
-			/* 4920 */
-			ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
-			ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+			if (ath_is_49ghz_allowed(caps->cap_eeprom.ee_regdomain))
+				caps->cap_range.range_5ghz_min = 4920;
+			else
+				caps->cap_range.range_5ghz_min = 5005;
+			caps->cap_range.range_5ghz_max = 6100;
 
 			/* Set supported modes */
-			__set_bit(AR5K_MODE_11A,
-					ah->ah_capabilities.cap_mode);
+			__set_bit(AR5K_MODE_11A, caps->cap_mode);
 		}
 
 		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
@@ -81,32 +82,29 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
 		    (AR5K_EEPROM_HDR_11G(ee_header) &&
 		     ah->ah_version != AR5K_AR5211)) {
 			/* 2312 */
-			ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
-			ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+			caps->cap_range.range_2ghz_min = 2412;
+			caps->cap_range.range_2ghz_max = 2732;
 
 			if (AR5K_EEPROM_HDR_11B(ee_header))
-				__set_bit(AR5K_MODE_11B,
-						ah->ah_capabilities.cap_mode);
+				__set_bit(AR5K_MODE_11B, caps->cap_mode);
 
 			if (AR5K_EEPROM_HDR_11G(ee_header) &&
 			    ah->ah_version != AR5K_AR5211)
-				__set_bit(AR5K_MODE_11G,
-						ah->ah_capabilities.cap_mode);
+				__set_bit(AR5K_MODE_11G, caps->cap_mode);
 		}
 	}
 
 	/* Set number of supported TX queues */
 	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_capabilities.cap_queues.q_tx_num =
-			AR5K_NUM_TX_QUEUES_NOQCU;
+		caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES_NOQCU;
 	else
-		ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+		caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
 
 	/* newer hardware has PHY error counters */
 	if (ah->ah_mac_srev >= AR5K_SREV_AR5213A)
-		ah->ah_capabilities.cap_has_phyerr_counters = true;
+		caps->cap_has_phyerr_counters = true;
 	else
-		ah->ah_capabilities.cap_has_phyerr_counters = false;
+		caps->cap_has_phyerr_counters = false;
 
 	return 0;
 }

drivers/net/wireless/ath/ath5k/debug.c

@@ -308,8 +308,6 @@ static const struct {
 	{ ATH5K_DEBUG_CALIBRATE, "calib",	"periodic calibration" },
 	{ ATH5K_DEBUG_TXPOWER,	"txpower",	"transmit power setting" },
 	{ ATH5K_DEBUG_LED,	"led",		"LED management" },
-	{ ATH5K_DEBUG_DUMP_RX,	"dumprx",	"print received skb content" },
-	{ ATH5K_DEBUG_DUMP_TX,	"dumptx",	"print transmit skb content" },
 	{ ATH5K_DEBUG_DUMPBANDS, "dumpbands",	"dump bands" },
 	{ ATH5K_DEBUG_DMA,	"dma",		"dma start/stop" },
 	{ ATH5K_DEBUG_ANI,	"ani",		"adaptive noise immunity" },
@@ -1035,24 +1033,6 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
 	spin_unlock_bh(&sc->rxbuflock);
 }
 
-void
-ath5k_debug_dump_skb(struct ath5k_softc *sc,
-			struct sk_buff *skb, const char *prefix, int tx)
-{
-	char buf[16];
-
-	if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) ||
-		     (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX)))))
-		return;
-
-	snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix);
-
-	print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data,
-		min(200U, skb->len));
-
-	printk(KERN_DEBUG "\n");
-}
-
 void
 ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf)
 {

drivers/net/wireless/ath/ath5k/debug.h

@@ -116,8 +116,6 @@ enum ath5k_debug_level {
 	ATH5K_DEBUG_CALIBRATE	= 0x00000020,
 	ATH5K_DEBUG_TXPOWER	= 0x00000040,
 	ATH5K_DEBUG_LED		= 0x00000080,
-	ATH5K_DEBUG_DUMP_RX	= 0x00000100,
-	ATH5K_DEBUG_DUMP_TX	= 0x00000200,
 	ATH5K_DEBUG_DUMPBANDS	= 0x00000400,
 	ATH5K_DEBUG_DMA		= 0x00000800,
 	ATH5K_DEBUG_ANI		= 0x00002000,
@@ -151,10 +149,6 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah);
 void
 ath5k_debug_dump_bands(struct ath5k_softc *sc);
 
-void
-ath5k_debug_dump_skb(struct ath5k_softc *sc,
-			struct sk_buff *skb, const char *prefix, int tx);
-
 void
 ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf);
 
@@ -181,10 +175,6 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {}
 static inline void
 ath5k_debug_dump_bands(struct ath5k_softc *sc) {}
 
-static inline void
-ath5k_debug_dump_skb(struct ath5k_softc *sc,
-			struct sk_buff *skb, const char *prefix, int tx) {}
-
 static inline void
 ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) {}
 

drivers/net/wireless/ath/ath5k/dma.c

@@ -838,9 +838,9 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah)
 	for (i = 0; i < qmax; i++) {
 		err = ath5k_hw_stop_tx_dma(ah, i);
 		/* -EINVAL -> queue inactive */
-		if (err != -EINVAL)
+		if (err && err != -EINVAL)
 			return err;
 	}
 
-	return err;
+	return 0;
 }

drivers/net/wireless/ath/ath5k/mac80211-ops.c

@@ -226,6 +226,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath5k_hw *ah = sc->ah;
 	struct ieee80211_conf *conf = &hw->conf;
 	int ret = 0;
+	int i;
 
 	mutex_lock(&sc->lock);
 
@@ -243,6 +244,14 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 		ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
 	}
 
+	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
+		ah->ah_retry_long = conf->long_frame_max_tx_count;
+		ah->ah_retry_short = conf->short_frame_max_tx_count;
+
+		for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++)
+			ath5k_hw_set_tx_retry_limits(ah, i);
+	}
+
 	/* TODO:
 	 * 1) Move this on config_interface and handle each case
 	 * separately eg. when we have only one STA vif, use