Read it first : https://github.com/android-rpi/local_manifests

# Build Kernel
 Install gcc-arm-linux-gnueabihf
 $ cd kernel/rpi
 $ ARCH=arm scripts/kconfig/merge_config.sh arch/arm/configs/bcm2709_defconfig android/configs/android-base.cfg android/configs/android-recommended.cfg
 $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make zImage
 $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make dtbs

# Install python mako module
  sudo apt-get install python-mako

# Patch framework source :
  https://github.com/android-rpi/device_brcm_rpi3/wiki#use-hal_pixel_format_bgra_8888
 
# Build Android source
 Continue build with http://source.android.com/source/building.html
 $ source build/envsetup.sh
 $ lunch rpi3-eng
 $ make ramdisk systemimage
 
# Help for build failure :
   https://github.com/android-rpi/device_brcm_rpi3/wiki/Build-Errors

# Prepare sd card
 Partitions of the card should be set-up like followings.
  p1 512MB for BOOT : Do fdisk : W95 FAT32(LBA) & Bootable, mkfs.vfat
  p2 512MB for /system : Do fdisk, new primary partition
  p3 512MB for /cache  : Do fdisk, mkfs.ext4
  p4 remainings for /data : Do fdisk, mkfs.ext4
 Set volume label for each partition - system, cache, userdata
  : use -L option of mkfs.ext4, e2label command, or -n option of mkfs.vfat
 
# Write system partition
  $ cd out/target/product/rpi3
  $ sudo dd if=system.img of=/dev/<p2> bs=1M
  
# Copy kernel & ramdisk to BOOT partition
  device/brcm/rpi3/boot/* to p1:/
  kernel/rpi/arch/arm/boot/zImage to p1:/
  kernel/rpi/arch/arm/boot/dts/bcm2710-rpi-3-b.dtb to p1:/
  kernel/rpi/arch/arm/boot/dts/overlays/vc4-kms-v3d.dtbo to p1:/overlays/vc4-kms-v3d.dtbo
  out/target/product/rpi3/ramdisk.img to p1:/

# HDMI_MODE : If DVI monitor does not work, try followings for p1:/config.txt
  hdmi_group=2
  hdmi_mode=85

# How to put Android-TV launcher :
  https://github.com/android-rpi/device_brcm_rpi3/wiki#how-to-apply-android-tv-leanback-launcher