$${\color{gray}Welcome} \space {\color{lightblue}To } \space {\color{lightgreen} \space IOT \space Project \space Using \space ESP32}$$

$$\color{red} \space ESP32 \space Based \space Smart \space Home \space Automation \space Solution \space IoT \space Project$$

IOT-PROJECT-USING-ESP32_-Smart-Home-Automation-Solution-Project

$$\color{orange} \space Hardware \space Requirements \space and \space Description$$

$$\color{green}Components$$	$$\color{red}Description$$	$$\color{red}Image$$
esp32	ESP32 is low cost and low power on chip microcontroller which is developed by Espress-if , it haswireless Bluetooth and wi-fi capabilities.

|1 channel relay module | A 5V relay module is an electronicdevice that acts as a switch, allowing low-voltage control signals to control high-voltage circuits. | |Dht 11(1) | Dht 11 is a low cost sensor that sensestemperature and humidity from environment and sends thesignal to micro controller.to measure surrounding air sensoruses thermistor and capacitive humidity sensor. |

|MQ 5 (Gas sensor) | The Grove - Gas Sensor(MQ5) module is useful for gas leakagedetection (in home and industry). |

|IR Sensor | The IR transmitter continuously emits the IR light andthe IR receiver keeps on checking for the reflected light. |

|Buzzer | |

|Jumper wires | |

|Powersupply | |

| Complier : Thonny Python | |

MODES To Monitoring

$$\color{green}BlynkApp$$	$$\color{red}ThinkSpeak$$	$$\color{red}Switch$$

| | |

• Blynk App COntrol By Phone and Computer/Laptop(Cloud storage)
• ThinkSpeak Also

code👇👇👇👇:

https://drive.google.com/file/d/1yq1LSxjtn2pypA1C1PO5RAgsa96rBgbY/view?usp=sharing

Report Documentation👇👇👇👇:

https://drive.google.com/file/d/1VdVypHyeQjQyCTAfFOrmWCSanWREPOIP/view?usp=sharing

fritzing🔑🔑🔑🔑:

app🙋‍♂️🙋‍♂️🙋‍♂️:

Blynk

ThinkSpeak

This app makes you control your Smart Vacuum Cleaner Robotic Car projects like move FordWard, BackWard , Left and Right , and Speed also using your mobile phone Blynk and ThinkSpeak WIFI.

All the files (apk, circuit, program, codes) are all provided) :)

Check the provided Schematic Fritzing for connections.

Labels(D0, D1, D2, D3, D4) can be Rename. i.e Forward, Backward, Left, Right, and Speed .

Type your Router SSID and Password

a. Upload and open the serial monitor and copy the ESP2866 IP address to the app.

HC-SR04 Ultrasonic sensor Connection to Nodemcu:-

Servo Motor Connection to Nodemcu:-

Team Members

Manjeet Kumar	Dilpreet Kaur	Simran
manjeetkyp24@gmail.com	dilpreet0604kaur@gmail.com	simran1112002@gmail.com

Contact

Have an project? DM me at 👇

Drop a mail to: manjeetkyp24@gmail.com

Follow My Linkedin

https://www.linkedin.com/in/manjeetdeveloper2022/

Donation

If this project help you reduce time to develop, you can give me a cup of coffee :)

https://paypal.me/ManjeetKumarBihar?country.x=IN&locale.x=en_GB