IO-PCB "Starting-point schematic (PDF)" link broken.

[mk-tron]

Hi,

I would like to contribute to the io-pcb design, but the link to the starting point schematics leads to "File not Found" at the moment.

Link Source page: https://github.com/makerspet/oomwoo/tree/main/contributions/io-pcb
Link Target: https://github.com/makerspet/oomwoo-io-board/blob/main/oomwoo-io-board-RK3562-schematic.pdf

[makers-pet]

Hi mk-tron,

Here is the correct link https://github.com/makerspet/oomwoo-io-board/blob/main/docs/oomwoo-io-board-RK3562-schematic.pdf .

FYI, I have arranged a professional PCB designer to design the I/O board schematic (with CM4/CM5 carrier sockets). So, the contents of makerspet/oomwoo-io-board may be changing rapidly over next week or two.

Your contribution would be much appreciated! Please feel free to let me know how you would like to contribute and I can put you in touch with the PCB designer.

[mk-tron]

Thanks for the update.

At this stage, I can help converting some of the schematics sheets to KiCad and updating, if that is OK with the PCB designer's workflow.

[iovsiann]

I see, the PCB engineer has already started converting the schematic. It should be done in a few days. Sorry about the possible disconnect.

I've asked him to check in his KiCad design into makerspet/oomwoo-io-board . It should be much easier to contribute in parallel once that is done.