Use serial_uart.c instead of x68k.c now

converter/x68k_usb/Makefile

@@ -16,8 +16,7 @@ TARGET_DIR = .
 SRC =	keymap.c \
 	matrix.c \
 	led.c \
-	protocol/x68k.c
-#	protocol/serial_uart.c
+	protocol/serial_uart.c
 
 CONFIG_H = config_pjrc.h
 

converter/x68k_usb/config_pjrc.h

@@ -34,7 +34,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) \
 )
 
 /* legacy keymap support */
@@ -45,17 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *     asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
  */
 #ifdef __AVR_ATmega32U4__
-#   define KBD_RX_VECT        USART1_RX_vect
-#   define KBD_RX_DATA        UDR1
-#   define KBD_RX_BAUD        2400
-#   define KBD_RX_UBBR        ((F_CPU/(16UL*KBD_RX_BAUD))-1)
-#   define KBD_RX_INIT()      do { \
-        UBRR1L = (uint8_t) KBD_RX_UBBR; \
-        UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1) | (1<<TXEN1); \
-    } while(0)
-
-
     #define SERIAL_UART_BAUD       2400
     #define SERIAL_UART_DATA       UDR1
     #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
@@ -66,8 +56,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
         UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
         UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \
                  (1<<TXEN1);                /* TX: enable */ \
-        UCSR1C = (1<<UPM11) | (1<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
-                 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* 8bit-data(011) */ \
+        UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+                 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
         sei(); \
     } while(0)
 #else

converter/x68k_usb/led.c

@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "serial.h"
 #include "led.h"
 #include "debug.h"
-#include "x68k.h"
 
 
 void led_set(uint8_t usb_led)
@@ -35,12 +34,10 @@ void led_set(uint8_t usb_led)
      * bit 0   かな
      */
     uint8_t led = 0xFF;
-    xprintf("usb_led: %02X\n", usb_led);
     if (usb_led&(1<<USB_LED_NUM_LOCK))      led &= ~(1<<2);
     if (usb_led&(1<<USB_LED_CAPS_LOCK))     led &= ~(1<<3);
     if (usb_led&(1<<USB_LED_SCROLL_LOCK))   led &= ~(1<<1);
     if (usb_led&(1<<USB_LED_COMPOSE))       led &= ~(1<<4);
     if (usb_led&(1<<USB_LED_KANA))          led &= ~(1<<0);
-    xprintf("led: %02X\n", led);
-    x68k_send(led);
+    serial_send(led);
 }

converter/x68k_usb/matrix.c

@@ -21,8 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <util/delay.h>
 #include "print.h"
 #include "util.h"
-#include "x68k.h"
+#include "serial.h"
 #include "matrix.h"
+#include "debug.h"
 
 
 /*
@@ -63,7 +64,7 @@ uint8_t matrix_cols(void)
 
 void matrix_init(void)
 {
-    x68k_init();
+    serial_init();
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
@@ -75,13 +76,13 @@ uint8_t matrix_scan(void)
 {
     is_modified = false;
 
-    uint8_t code;
-    code = x68k_recv();
-    if (code == 0) {
+    uint16_t code;
+    code = serial_recv2();
+    if (code == -1) {
         return 0;
     }
 
-    phex(code); print(" ");
+    dprintf("%02X\n", code);
     if (code&0x80) {
         // break code
         if (matrix_is_on(ROW(code), COL(code))) {