Flask-User YANKED pypi

[maucm92]

Hello,
First of all, congratulations for the excellent work on this project.
We recently detected that the project on PyPi is listed as "Yanked".
I have been reported that doing pip install Flask-User does not work due to the state of the project and the version number must be added to be able to install.
On the other hand, a warning message is observed during the installation and a reason why the project is marked as Yanked is not indicated.

My questions are:

1. What can we do to avoid the mentioned problems and continue using the module normally?
2. Since when is the project marked as Yanked?
3. Is this due to a bug in the module?
4. Or is it because the project is no longer in active development and will be removed or deprecated?
5. Should we look for an alternative project?

Thank you very much

Greetings,
Mauro

[charlbury]

Same questions from me. As additional information, if I do a

pip install flask-user

I get the following error:

ERROR: Could not find a version that satisfies the requirement flask-user (from versions: 0.3, 0.3.1, 0.3.2, 0.3.3, 0.3.4, 0.3.5, 0.3.6, 0.3.7, 0.3.8, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.4.4, 0.4.5, 0.4.6, 0.4.7, 0.4.8, 0.4.9, 0.5.0, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.5.5, 0.6, 0.6.1, 0.6.2, 0.6.3, 0.6.4, 0.6.5, 0.6.6, 0.6.7, 0.6.8, 0.6.9, 0.6.10, 0.6.12, 0.6.13, 0.6.14, 0.6.15, 0.6.16, 0.6.17, 0.6.19, 0.6.20, 0.6.21, 1.0.1.1, 1.0.1.2, 1.0.1.3, 1.0.1.4, 1.0.1.5, 1.0.2.0, 1.0.2.1, 1.0.2.2)
ERROR: No matching distribution found for flask-user

[jgerry2002]

Yes I've seen this same issue. Not sure what happened to this version.

[peterstavrou]

If anyone knows the answer to this, I would also love to know.
Perhaps its unsafe to use this package for now?

[amanve]

It's not updated for recent

[jgerry2002]

I'm guessing the maintainer has lost interest in this project. There has been no activity since 2020 in his github account. If he is out there hopefully he will respond soon.

[amanve]

You can fix this manually -

1. Clone the repo - https://github.com/lingthio/Flask-User.git
2. upgrade your "pip" - py -m pip install --upgrade pip
3. upgrade "build" - py -m pip install --upgrade build
4. browse to the folder location of the repo cloned
5. then build the package - py -m build
6. then go to 'dist' folder created there would be a filename.whl file
7. run pip install filename.whl
8. at last install pip install wtforms[email] for email validators.
   Alternatively install from here -
   Flask_User-1.0.2.3-py2.py3-none-any.zip

[dave-c-vt]

I'm guessing the maintainer has lost interest in this project. There has been no activity since 2020 in his github account. If he is out there hopefully he will respond soon.

oof. hopefully guy is ok, otherwise, we should probably fork and re-pypi this project under a different moniker?

[jgerry2002]

I'm guessing the maintainer has lost interest in this project. There has been no activity since 2020 in his github account. If he is out there hopefully he will respond soon.

oof. hopefully guy is ok, otherwise, we should probably fork and re-pypi this project under a different moniker?

It may be a good idea to consider since we've seen no activity if it makes sense to keep this project going.

[peterstavrou]

Can always use flask-security-too as an alternative.

[yejuns]

I also had the same problem, finally after updating the pip version by the command 'python -m pip install --upgrade pip', the installation was successful

[johan-sorman]

Can't install it either.

[GitauHarrison]

Same questions from me. As additional information, if I do a

pip install flask-user

I get the following error:

ERROR: Could not find a version that satisfies the requirement flask-user (from versions: 0.3, 0.3.1, 0.3.2, 0.3.3, 0.3.4, 0.3.5, 0.3.6, 0.3.7, 0.3.8, 0.4.0, 0.4.1, 0.4.2, 0.4.3, 0.4.4, 0.4.5, 0.4.6, 0.4.7, 0.4.8, 0.4.9, 0.5.0, 0.5.1, 0.5.2, 0.5.3, 0.5.4, 0.5.5, 0.6, 0.6.1, 0.6.2, 0.6.3, 0.6.4, 0.6.5, 0.6.6, 0.6.7, 0.6.8, 0.6.9, 0.6.10, 0.6.12, 0.6.13, 0.6.14, 0.6.15, 0.6.16, 0.6.17, 0.6.19, 0.6.20, 0.6.21, 1.0.1.1, 1.0.1.2, 1.0.1.3, 1.0.1.4, 1.0.1.5, 1.0.2.0, 1.0.2.1, 1.0.2.2)
ERROR: No matching distribution found for flask-user

Same issue

[taylenschmaltz]

well what do we do now

[johan-sorman]

well what do we do now

I migrated to django framework

[dave-c-vt]

I was able to switch to using Flask-Login without any trouble at all.

https://github.com/maxcountryman/flask-login