Merge branch 'v3.5-for-usb' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/kgene/linux-samsung into usb-next

MAINTAINERS

@@ -1974,7 +1974,9 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
+M:	Rafael J. Wysocki <rjw@sisk.pl>
 L:	cpufreq@vger.kernel.org
+L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -4040,6 +4042,7 @@ F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
+M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/kernel/ptrace.c

@@ -906,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
 
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	if (!ip)
+	if (why)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -936,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 
 	current_thread_info()->syscall = scno;
 
+	/*
+	 * IP is used to denote syscall entry/exit:
+	 * IP = 0 -> entry, =1 -> exit
+	 */
+	ip = regs->ARM_ip;
+	regs->ARM_ip = why;
+
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)

arch/arm/kernel/smp.c

@@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
 
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
@@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
 	cpu_init();
 	preempt_disable();
 	trace_hardirqs_off();

arch/arm/kernel/sys_arm.c

@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
 	return ret;

arch/arm/mach-exynos/Kconfig

@@ -232,6 +232,9 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -247,6 +250,7 @@ config MACH_UNIVERSAL_C210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
@@ -259,6 +263,7 @@ config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_FIMC
 	select S5P_SETUP_MIPIPHY
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -277,6 +282,7 @@ config MACH_NURI
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_I2C6
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_CSIS0
 	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0

arch/arm/mach-exynos/clock-exynos5.c

@@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = {
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {

arch/arm/mach-exynos/include/mach/irqs.h

@@ -189,6 +189,7 @@
 #define IRQ_IIC7			EXYNOS4_IRQ_IIC7
 
 #define IRQ_USB_HOST			EXYNOS4_IRQ_USB_HOST
+#define IRQ_OTG				EXYNOS4_IRQ_USB_HSOTG
 
 #define IRQ_HSMMC0			EXYNOS4_IRQ_HSMMC0
 #define IRQ_HSMMC1			EXYNOS4_IRQ_HSMMC1

arch/arm/mach-exynos/include/mach/map.h

@@ -130,6 +130,9 @@
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
 
+#define EXYNOS4_PA_HSOTG		0x12480000
+#define EXYNOS4_PA_USB_HSPHY		0x125B0000
+
 #define EXYNOS4_PA_SATA			0x12560000
 #define EXYNOS4_PA_SATAPHY		0x125D0000
 #define EXYNOS4_PA_SATAPHY_CTRL		0x126B0000
@@ -186,6 +189,7 @@
 #define S3C_PA_SPI0			EXYNOS4_PA_SPI0
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
+#define S3C_PA_USB_HSOTG		EXYNOS4_PA_HSOTG
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -163,6 +163,9 @@
 #define S5P_CHECK_SLEEP				0x00000BAD
 
 /* Only for EXYNOS4210 */
+#define S5P_USBDEVICE_PHY_CONTROL	S5P_PMUREG(0x0704)
+#define S5P_USBDEVICE_PHY_ENABLE	(1 << 0)
+
 #define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
 #define S5P_USBHOST_PHY_ENABLE		(1 << 0)
 

arch/arm/mach-exynos/mach-nuri.c

@@ -352,6 +352,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
 	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
@@ -367,7 +368,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
 	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
-	REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
@@ -823,6 +824,7 @@ static struct regulator_init_data __initdata max8997_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.disabled	= 1,
 		},
@@ -1080,6 +1082,9 @@ static void __init nuri_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat nuri_hsotg_pdata;
+
 /* CAMERA */
 static struct regulator_consumer_supply cam_vt_cam15_supply =
 	REGULATOR_SUPPLY("vdd_core", "6-003c");
@@ -1292,6 +1297,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_fimc_md,
+	&s3c_device_usb_hsotg,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1340,6 +1346,7 @@ static void __init nuri_machine_init(void)
 	nuri_camera_init();
 
 	nuri_ehci_init();
+	s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));

arch/arm/mach-exynos/mach-universal_c210.c

@@ -41,6 +41,7 @@
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
+#include <plat/s5p-time.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
 
@@ -205,6 +206,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
@@ -290,6 +292,7 @@ static struct regulator_init_data lp3974_ldo7_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
@@ -486,7 +489,10 @@ static struct regulator_init_data lp3974_vichg_data = {
 static struct regulator_init_data lp3974_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
+		.min_uV		= 4800000,
+		.max_uV		= 4800000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.enabled	= 1,
 		},
@@ -994,6 +1000,9 @@ static struct gpio universal_camera_gpios[] = {
 	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat universal_hsotg_pdata;
+
 static void __init universal_camera_init(void)
 {
 	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
@@ -1049,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
+	&s3c_device_usb_hsotg,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -1064,6 +1074,7 @@ static void __init universal_map_io(void)
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void s5p_tv_setup(void)
@@ -1101,6 +1112,7 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
 	universal_camera_init();
 
 	/* Last */
@@ -1114,7 +1126,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
-	.timer		= &exynos4_timer,
+	.timer		= &s5p_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END