Skip to content
/ memtoy Public

Memtoy - a toy [tool] for performing various memory operations [mapping, protection, faulting] for investigating vm behavior.

License

Notifications You must be signed in to change notification settings

kosaki/memtoy

Repository files navigation

Memtoy  - a toy [tool] for performing various memory
operations [mapping, protection, faulting] for investigating
vm behavior.

Memtoy started out as a set of small, ad hoc C test programs developed
by Ray Bryant, et al of SGI for testing early versions of Linux memory
migration.  These tests included pieces of other works, such as linux
headers, ...  Memtoy evolved to obviate continual hacking and rebuilding
of ad hoc C programs to test different memory policy and migration
scenarios.  Admittedly, a fair amount of odd hacking and rebuilding has
gone into memtoy.  Very little of the original test code remains, but
memtoy still uses some local copies of linux headers.  No copyrights
were removed, and no puppies were injured in the making of memtoy.

N.B., migrate command depends on Christoph Lameter's "direct memory migration"
      patches.   Available in upstream kernels since 2.6.16 and in distros
      based on those kernels--e.g., SLES10, RHEL5

      Also, the 'noop' policy and '+lazy' flag to mbind() requires
      migrate-on-fault kernel patches [from <lee.schermerhorn@hp.com>]

      For other "dependencies" see the version history at the end.

=====================================================================
Building:   

Read the Makefile.  You may need to edit it, depending on the distro
environment on which you are compiling.  Some things to consider:

memtoy [commands & segment components] depends on <numa.h> and <numaif.h>.
The executable depends on libnuma.  [-lnuma => /usr/lib/libnuma.so]
These [probably] reside in the numactl-devel package.  For RHEL5, this
package resides on the install DVD or one of the install CDROMs.
For SLES10, it probably resides on the SLES10 SDK cd.
Other distros: ???

memtoy also depends on the gnu readline and history command line
editting feature.  These are included in the readline-devel-* package.
The readline/history feature itself depends on the ncurses libraries,
found in the ncurses-devel-* package.

The migrate_pages.[co] stub is only needed until the migrate_pages()
syscall shows up in libnuma.  This is the case for RHEL5 [and SLES10?].
migrate_pages.o depends on <linux/sys.h> on RHEL4/SLES9 and on 
<sys/syscall.h> on RHEL5 [and SLES10?] to determine whether or not
the migrate_pages() system call exists.  On the later distros, you 
could probably just remove migrate_pages.o from the EXTRAOBJS macro
and be done with it [untested].

migrate_pages.h defines MPOL_MF_* flags required by memtoy that are
not defined in the <numa*.h> headers--e.g., MPOL_MF_LAZY for lazy
page migration.  We will continue to need this header to build
memtoy until lazy migration is merged and available, or until we
give up on it and rip support for it out of memtoy.

memtoy can be built and run on a non-numa platform as long as the
necessary headers are available [<numa.h> and <numaif.h>].  A copy
of these headers from the numactl source package resides in the
./include directory.  numa_stubs.c contains function stubs for the
libnuma functions used by memtoy.  "make NUMA=no" should build
memtoy for testing on a platform/distro without libnuma or the 
associated headers.  All numa features will be disabled.

Note:  "migrate_pages" is misspelled "migratepages" in the RHEL5 
<numaif.h> from the numactl-devel package.  The name of the function
entry point in libnuma.so is "migrate_pages".  ./commands.c contains
a hack to "#define migratepage migrate_pages" before including 
<numaif.h>.

=====================================================================
Usage:  memtoy [-v] [-V] [-{h|x}] [<script-file>]

Where:
	-v            enable verbosity
	-V            display version info
	-h|x          show this usage/help message

memtoy can be run interactively or in batch mode.  If <script-file>
is specified on the command line, memtoy runs in batch mode.
Otherwise, it will run in interactive mode.
In interactive mode, use 'help' for a list of commands, and 'help <command>'
for more info about a specific command.

Can also:  echo help [<command>] | memtoy

------------------------------------

Supported commands [augmented help]:

quit           - just what you think
	EOF on stdin has the same effect

exit - alias for 'quit'

help           - show this help
help <command> - display help for just <command>

pid            - show process id of this session

pause          - pause program until signal -- e.g., INT, USR1

numa          - display numa info as seen by this program.
	shows nodes from which program may allocate memory
	with total and free memory.

migrate <to-node-id[s]> [<from-node-id[s]>] - 
	migrate this process' memory from <from-node-id[s]>
	to <to-node-id[s]>.
	Specify multiple node ids as a comma-separated list.
	If <from-node-id[s]> is omitted, it defaults to memtoy's
	current set of allowed nodes.

show [<name>]  - show info for segment[s]; default all
	If <seg-name> == [or starts with] '+', show the segments from
	the task's maps [/proc/<mypid>/maps] -- otherwise, not.
	Note:  the <seg-name> of a "file" segment is the "basename"
	       of the file's <pathname>.

anon <seg-name> <seg-size>[k|m|g|p] [<seg-share>] -
	define a MAP_ANONYMOUS segment of specified size
	<seg-name> must be unique.
	<seg-share> := private|shared - default = private

file <pathname> [<offset>[k|m|g|p] <length>[k|m|g|p]] [<seg-share>] -
	define a mapped file segment of specified length starting at the
	specified offset into the file. 
	Use the "basename" of <pathname> for <seg-name> with commands
	that require one.  Therefore, the file's basename must not
	<offset> and <length> may be omitted and specified on the map
	command.
	<seg-share> := private|shared - default = private

shmem <seg-name> <seg-size>[k|m|g|p] - 
	define a shared memory segment of specified size.
	<seg-name> must be unique.
	You may need to increase limits [/proc/sys/kernel/shmmax].
	Use map/unmap to attach/detach

remove <seg-name> [<seg-name> ...] - remove the named segment[s]

map <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]] [<seg-share>] - 
	mmap()/shmat() a previously defined, currently unmapped() segment.
	<offset> and <length> apply only to mapped files.
	Use <length> of '*' or '0' to map to the end of the file.
	Offset and length specified here override those specified on
	the file command.

unmap <seg-name> - unmap specified segment, but remember name/size/...
	You can't unmap segments from the task's /proc/<pid>/maps.

lock <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]] - 
	mlock() a [range of a] previously mapped segment.
	Lock the named segment from <offset> through <offset>+<length>
	into memory.  If <offset> and <length> omitted, locks all pages
	of mapped segment.  Locking a range of a segment causes the pages
	backing the specified/implied range to be faulted into memory.
	NOTE:  locking is restricted by resource limits for non-privileged
	users.  See 'ulimit -l' -- results in Kbytes.


unlock <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]] - 
	munlock() a [range of a] previously mapped segment.
	Unlock the named segment from <offset> through <offset>+<length>.
	If <offset> and <length> omitted, unlocks all pages of segment.

slock <shm-seg-name> - 
	SHM_LOCK a previously mapped shmem segment into memory.
	SHM_LOCK will not automatically fault the pages of the segment
	into memory.  Use the "touch" command to fault in the segment
	after locking, if necessary.
	NOTE:  locking is restricted by resource limits for non-privileged
	users.  See 'ulimit -l' -- results in Kbytes.

sunlock <shm-seg-name> - 
	SHM_UNLOCK a previously SHM_LOCKed shmem segment.

mbind <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]]
      <policy>[+shared][+move[+all][+lazy]] [<node/list>] - 
	set the numa policy for the specified range of the named segment
	to policy --  one of {default, bind, preferred, interleaved, noop}.
	<node/list> specifies a node id or a comma separated list of
	node ids.  <node/list> is ignored for 'default' policy, and
	only the first node is used for 'preferred' policy.
	'+shared' apply shared policy to shared, file mapping.  This flag must
	         come before '+move', if specified.  Current uid must be owner
	        of the file and shared_file_policy must be enabled in memtoy's
	        cpuset.
	'+move' specifies that currently allocated pages be moved, if
	        necessary/possible, to satisfy policy.  Pages can't be
	        moved if they are mapped by more than one process.
	'+all' [valid only with +move] specifies that all eligible pages
	        in task be moved to satisfy policy, even if they are
	        mapped by more than one process.  Requires appropriate
	        privilege.
	'+lazy' [valid only with +move] requests that mbind just unmap the
	        pages in the specified range after setting the new policy.
	        Page migration will then occur when the task touches the pages
	        to fault them back into its page table.
	For policies preferred and interleaved, <node/list> may be specified
	as '*' meaning local allocation for preferred policy and "all allowed
	nodes" for interleave policy.

touch <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]] [read|write]
	read [default] or write the named segment from <offset> through
	<offset>+<length>.  If <offset> and <length> omitted, touches all
	 of mapped segment.
	You can't write to segments from the task's /proc/<pid>/maps.

where <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]] - 
	show the node location of pages in the specified range
	of the specified segment.  <offset> defaults to start of
	segment; <length> defaults to 64 pages.
	Use SIGINT to interrupt a long display.

cpus [{0x<mask>|<cpu-list>}] -	query/change program's cpu affinity mask.

        Specify allowed cpus as a comma separated list of cpu masks:
        0x<mask>, where <mask> consists entirely of hex digits, high
        order bits first, or as a comma separated list of decimal
        cpu ids.

mems [{0x<mask>|<node-list>}] -	query/change program's memory affinity mask.

	Specify allowed memories [nodes] as 0x<mask>, where <mask>
	consists entirely of hex digits, or as a comma separated list
	of decimal memory/node ids

child <child-name> -    create a child process named <child-name>.
	child enters command loop, reading from pipe.
	Commands prefixed with '/<child-name>' will be sent to the
	child process.  Use '/' by itself, or '/?' to list existing
	children.  Note that children may also have children of
	their own and commands may be sent to 'grandchildren'
	via '/<child>/<grandchild>[/...] <command> ...

kick <child> [<signal>] - post <signal> to <child>
	<signal> may be entered by number or name.
	Use 'kick ?' to see the list of signal names
	that memtoy recognizes

Note:  to recognize the optional offset and length args, they must
start with a digit.  This is required anyway because the strings are
converted using strtoul() with a zero 'base' argument.  So, hex args
must always start with '0x'...

===================================================================
Versions:

up thru version 0.5*:
	migrate command assumed Ray Bryant's manual page migration
	migrate_pages() sys call.

	mbind command assumed prototype "lazy page migration" layered
	on manual page migration:  

	mbind <seg-name> [<offset>[k|m|g|p] <length>[k|m|g|p]]
	      <policy>[+move[+wait]] [<node/list>] - 
	set the numa policy for the specified range of the name segment
	to policy --  one of {default, bind, preferred, interleaved}.
	<node/list> specifies a node id or a comma separated list of
	node ids.  <node> is ignored for 'default' policy, and only
	the first node is used for 'preferred' policy
	'+move' specifies that currently allocated pages be prepared
		for migration on next touch
	'+wait' [valid only with +move] specifies that pages mbind()
	  touch the pages and wait for migration before returning.

	'move' => MPOL_MF_MOVE flag - always "lazy"
	'wait' => MPOL_MF_WAIT flag

starting with version 0.6, move to Christoph Lameter's new migration
implementation [2.6.16-rc1...]:

v0.6a
	'move' => MPOL_MF_MOVE flag - "eager migration" == migrate
	[range] now.  Pages that are only mapped by this instance
	of memtoy can be migrated.
	'move'+'all' => MPOL_MF_MOVE_ALL flag - eager migration -
	try to move pages mapped by > 1 process/mm/vma.

v0.6b
	fix build errors on SLES* discovered by Christoph:  nix inclusion
	of <linux/list.h>; add missing '=' in command table initialization.

	added support for <script-file> name on command line.

	fix up interpretation of MPOL_MF_MOVE_ALL in mbind.

	preload segment table with segments from task's /proc/<pid>/maps:
		stack, heap, executable image's text and data,
		mapped libraries' text and data.
	HACK:  because of segment name uniqueness requirement, only one
		of any mapped libraries' text and/or data segments is
		included in the table.  This should be sufficient for
		testing migration of test segments.
	NOTE:  segments preloaded from '/maps can't be unmapped nor
		written to via 'touch <seg-name> w'

	fix up help text and usage to match these changes.

v0.6c
	use readline()/add_history() for command line editing in
	interactive mode.

	modified memtoy.c:vprint() [verbose print] to use stdout, instead
	of stderr to correctly interleave redirected output.

v0.6d =
v0.7
	add 'lazy' flag to mbind command for testing migrate-on-fault.

v0.8
	add MPOL_NOOP for testing that proposal.
	add 'cpus' command to query/change cpu affinity.
	add 'mems' command to query/change mems_allowed.

v0.9
	start adding support for > 64 cpus.
	needs testing with same.
	see MAX_CPUID in memtoy.h;  cpus() and show_cpus() in
	commands.c

v0.9a/b
	add lock/unlock commands

V0.10
	hack 'cpus' command and helper functions to support > 64 cpus
	via hex masks.  Use 32-bit masks so for compatibility with
	32-bit systems.

V0.10a
	add more verbosity when requested:
		munmap(), ...

V0.10b
	enhance error messages from mems, cpus

	enhance Makefile so that commands.o and segement.o depend
	on numa[if].h header.  Will generate more meaningful errors
	when headers are missing.

	modify migrate_pages.c stub to include <sys/syscall.h>
	instead of <linux/sys.h>.  Works for RHEL5 build.
	Modify Makefile dependency.

	NOTE:  don't really need to build/link migrate_pages.* for
	RHEL5/SLES10 because migrate_pages(2) now in libnuma.

V0.10c
	fix build against RHEL 5's <numaif.h> from numactl-devel
	package.  In that header, "migrate_pages" is misspelled as
	"migratepages" resulting in undefined symbol on link.  The
	function is named "migrate_pages" in libnuma.so.

V0.11
	rename 'shm' -> 'shmem'.  'shm' still works as abbrev.

	Add optional huge flag to shm[em] command to use hugepages.

V0.11a
	Display segment location [where command] in terms of segment pagesize.
	Had to add support for per segment pagesize, and fetch huge_pagesize
	from /proc/meminfo.

V0.11b
	Fix "touch memory" to use segment page size [base or huge].

V0.12
	Add support for '*' nodelist specification to mbind command for
	interleave and preferred policies.  '*' means "all available
	nodes".  Passes null nodemask to mbind().

V0.13
	Add support for experimental "MPOL_F_MEMS_ALLOWED get_mempolicy()
	flag.  Requires kernel support.  See _USE_MPOL_F_MEMS_ALLOWED
	in DEFS macro in Makefile, and usage in commands.c

V0.14
	Add support for expermental "MPOL_MF_SHARED" flag.  Require this
	flag to install shared policy on shared, file backed mapping in
	attempt to address concerns about this semantic suddenly working
	with older programs that don't expect it.
	Fix return value of remove_seg() [remove command]--i.e., add return
	in case of success.

V0.15
	Fix up build on non-numa platforms.  Include numa headers from
	numactl source package in ./include.  Clean up numa_stubs.c to 
	build with latest numa headers.

	Add slock/sunlock commands to SHM_LOCK/SHM_UNLOCK shmem segments.
V0.16
	Add "snooze" command [sleep for specified interval]

	Add "mpol" -- set/query task policy

About

Memtoy - a toy [tool] for performing various memory operations [mapping, protection, faulting] for investigating vm behavior.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages