release 4.1.0 - Nodemcu systems cannot connect

[peter656761]

I am a relatively new user of Homeassistant and Nodemcu boards but have found the latest release 4.1.0 seems to have stopped working

For example I can flash via cable a new NodeMCU esp8266. It asks for wifi credentials that are input and it gets an ip address.
Going to add the unit to ESP home I notice that the included link is for the D1 mini not the esp. I can leave it as a D1 or change it to the esp and either way then adopt the board and install. This is the only time the logs are visible and I see that it connects to the homeassitant and then disconnects continually.

Upgrading produces the same result - a system seemingly installed but cannot be connected to

[klaasnicolaas]

Which board exactly do you have?

./Klaas

[peter656761]

These were working perfectly until th eupdate/latest version AZDelivery NodeMCU WiFi Lolin V3 ESP8266 ESP-12F Internet Development Board Module (32mbit) Flash Memory Chip Series Port Adapter with CH340

https://www.amazon.co.uk/gp/product/B074Q27ZBQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[klaasnicolaas]

After testing, I have also noticed that the D1 Mini firmware is being used, so I'm going to look for a solution for that. I wouldn't know of an immediate solution other than removing the device everywhere and trying to add it again.

./Klaas

[klaasnicolaas]

Have you been able to find a solution yourself in the meantime?

./Klaas

[peter656761]

Hi Klaas Thank you for the email. I had to manually initiate the Nodemcu install via ESPhome then adopt it into Homeassistant. I then downloaded your yaml and made a few modifications to work perfectly thank you Regards Peter# From: Klaas Schoute ***@***.***> Sent: Sunday, July 14, 2024 1:16 PM To: klaasnicolaas/home-assistant-glow ***@***.***> Cc: Peter Huish ***@***.***>; Author ***@***.***> Subject: Re: [klaasnicolaas/home-assistant-glow] release 4.1.0 - Nodemcu systems cannot connect (Issue #528) Have you been able to find a solution yourself in the meantime? ./Klaas — Reply to this email directly, view it on GitHub<#528 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A33ZPRCKBOQ2EERVES3BMNDZMJTXLAVCNFSM6AAAAABKOPKEHCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMRXGMZDKNZQGA>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>