Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Improved and new platform support for various SoCs:

  New SoC support:
   - Broadcom BCM23550
   - Freescale i.MX7Solo
   - Qualcomm MDM9615
   - Renesas r8a7792

  Improvements:
   - convert clps711x to multiplatform
   - debug uart improvements for Atmel platforms
   - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
   - OMAP tweaks and improvements to hwmod
   - OMAP support for kexec on SMP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
  ARM: s3c64xx: smartq: Avoid sparse warnings
  ARM: sti: Implement dummy L2 cache's write_sec
  ARM: STi: Update machine _namestr to be more generic.
  arm: meson: explicitly select clk drivers
  ARM: tango: add Suspend-to-RAM support
  ARM: hisi: consolidate the hisilicon machine entries
  ARM: tango: fix CONFIG_HOTPLUG_CPU=n build
  MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry
  MAINTAINERS: Update BCM63XX entry
  MAINTAINERS: Add NS2 entry
  MAINTAINERS: Fix nsp false-positives
  MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries
  ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
  ARM: clps711x: Switch to MULTIPLATFORM
  ARM: clps711x: Remove boards support
  ARM: clps711x: Add basic DT support
  ARM: clps711x: Reduce static map size
  ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
  ARM: oxnas: Change OX810SE default driver config
  ...

Documentation/arm/Atmel/README

@@ -91,9 +91,15 @@ the Atmel website: http://www.atmel.com.
           http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
 
       - sama5d2 family
-        - sama5d27
+        - sama5d21
+        - sama5d22
+        - sama5d23
+        - sama5d24
+        - sama5d26
+        - sama5d27 (device superset)
+        - sama5d28 (device superset + environmental monitors)
         + Datasheet
-          Coming soon
+          http://www.atmel.com/Images/Atmel-11267-32-bit-Cortex-A5-Microcontroller-SAMA5D2_Datasheet.pdf
 
 
 Linux kernel information

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -27,6 +27,9 @@ Optional properties:
   number to 1.
 - fsl,magic-packet : If present, indicates that the hardware supports waking
   up via magic packet.
+- fsl,err006687-workaround-present: If present indicates that the system has
+  the hardware workaround for ERR006687 applied and does not need a software
+  workaround.
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes

Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt

@@ -14,6 +14,7 @@ Required properties:
       - "renesas,r8a7793-sysc" (R-Car M2-N)
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
+      - "renesas,r8a7796-sysc" (R-Car M3-W)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
 

MAINTAINERS

@@ -1613,8 +1613,10 @@ F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
 F:	arch/arm/mach-s5p*/
 F:	arch/arm/mach-exynos*/
-F:	drivers/*/*s3c2410*
-F:	drivers/*/*/*s3c2410*
+F:	drivers/*/*s3c24*
+F:	drivers/*/*/*s3c24*
+F:	drivers/*/*s3c64xx*
+F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
 F:	drivers/spi/spi-s3c*
@@ -1752,8 +1754,7 @@ ARM/TANGO ARCHITECTURE
 M:	Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	arch/arm/mach-tango/
-F:	arch/arm/boot/dts/tango*
+N:	tango
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -2507,17 +2508,14 @@ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-L:	bcm-kernel-feedback-list@broadcom.com
+M:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
+N:	bcm281*
+N:	bcm113*
+N:	bcm216*
+N:	kona
 F:	arch/arm/mach-bcm/
-F:	arch/arm/boot/dts/bcm113*
-F:	arch/arm/boot/dts/bcm216*
-F:	arch/arm/boot/dts/bcm281*
-F:	arch/arm64/boot/dts/broadcom/
-F:	arch/arm/configs/bcm_defconfig
-F:	drivers/mmc/host/sdhci-bcm-kona.c
-F:	drivers/clocksource/bcm_kona_timer.c
 
 BROADCOM BCM2835 ARM ARCHITECTURE
 M:	Stephen Warren <swarren@wwwdotorg.org>
@@ -2540,20 +2538,21 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
+M:	Rafał Miłecki <zajec5@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
 F:	arch/arm/mach-bcm/bcm_5301x.c
-F:	arch/arm/boot/dts/bcm5301x.dtsi
+F:	arch/arm/boot/dts/bcm5301x*.dtsi
 F:	arch/arm/boot/dts/bcm470*
 
 BROADCOM BCM63XX ARM ARCHITECTURE
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
-F:	arch/arm/mach-bcm/bcm63xx.c
-F:	arch/arm/include/debug/bcm63xx.S
+N:	bcm63xx
 
 BROADCOM BCM63XX/BCM33XX UDC DRIVER
 M:	Kevin Cernekee <cernekee@gmail.com>
@@ -2565,8 +2564,8 @@ BROADCOM BCM7XXX ARM ARCHITECTURE
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
@@ -2623,13 +2622,13 @@ BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 M:	Jon Mason <jonmason@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/cygnus-linux.git
 S:	Maintained
 N:	iproc
 N:	cygnus
-N:	nsp
+N:	bcm[-_]nsp
 N:	bcm9113*
 N:	bcm9583*
 N:	bcm9585*
@@ -2640,6 +2639,9 @@ N:	bcm583*
 N:	bcm585*
 N:	bcm586*
 N:	bcm88312
+F:	arch/arm64/boot/dts/broadcom/ns2*
+F:	drivers/clk/bcm/clk-ns*
+F:	drivers/pinctrl/bcm/pinctrl-ns*
 
 BROADCOM BRCMSTB GPIO DRIVER
 M:	Gregory Fong <gregory.0xf0@gmail.com>
@@ -2684,8 +2686,8 @@ F:	drivers/net/ethernet/broadcom/bcmsysport.*
 
 BROADCOM VULCAN ARM64 SOC
 M:	Jayachandran C. <jchandra@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	arch/arm64/boot/dts/broadcom/vulcan*
 

arch/arm/Kconfig

@@ -351,20 +351,6 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CPU_ARM720T
-	select GENERIC_CLOCKEVENTS
-	select CLPS711X_TIMER
-	select GPIOLIB
-	select MFD_SYSCON
-	select SOC_BUS
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select CLKSRC_MMIO

arch/arm/Kconfig.debug

@@ -109,23 +109,41 @@ choice
 		    0x80020000      | 0xf0020000     | UART8
 		    0x80024000      | 0xf0024000     | UART9
 
-	config DEBUG_AT91_UART
-		bool "Kernel low-level debugging on Atmel SoCs"
-		depends on ARCH_AT91
+	config DEBUG_AT91_RM9200_DBGU
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on atmel devices.
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 
-		  SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
-		  rm9200, 9260/9g20,   0xfffff200        0xfefff200       DBGU
-		  9261/9g10, 9rl
-		  9263, 9g45, sama5d3  0xffffee00        0xfeffee00       DBGU
-		  sama5d4              0xfc00c000        0xfb00c000       USART3
-		  sama5d4              0xfc069000        0xfb069000       DBGU
-		  sama5d2              0xf8020000        0xf7020000       UART1
+	config DEBUG_AT91_SAM9263_DBGU
+		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91SAM9 || SOC_SAMA5D3
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91sam9263, at91sam9g45, at91sam9m10,
+		    sama5d3
 
-		  Please adjust DEBUG_UART_PHYS configuration options based on
-		  your needs.
+	config DEBUG_AT91_SAMA5D2_UART1
+		bool "Kernel low-level debugging on SAMA5D2 UART1"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D2
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the UART1 port of sama5d2.
+
+	config DEBUG_AT91_SAMA5D4_USART3
+		bool "Kernel low-level debugging on SAMA5D4 USART3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the USART3 port of sama5d4.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -138,8 +156,8 @@ choice
 		select DEBUG_UART_PL01X
 
 	config DEBUG_BCM_5301X
-		bool "Kernel low-level debugging on BCM5301X UART1"
-		depends on ARCH_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
 	config DEBUG_BCM_KONA_UART
@@ -1296,6 +1314,10 @@ choice
 
 endchoice
 
+config DEBUG_AT91_UART
+	bool
+	depends on ARCH_AT91
+
 config DEBUG_EXYNOS_UART
 	bool
 
@@ -1502,8 +1524,10 @@ config DEBUG_UART_PHYS
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe800000 if ARCH_IOP32X
@@ -1518,6 +1542,8 @@ config DEBUG_UART_PHYS
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
+	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1566,13 +1592,17 @@ config DEBUG_UART_VIRT
 				DEBUG_S3C2410_UART1)
 	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
+	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
@@ -1627,7 +1657,8 @@ config DEBUG_UART_VIRT
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"

arch/arm/Makefile

@@ -140,7 +140,6 @@ head-y		:= arch/arm/kernel/head$(MMUEXT).o
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # We don't want the htc bootloader to corrupt kernel during resume
 textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory

arch/arm/include/debug/at91.S

@@ -9,22 +9,14 @@
  *
 */
 
-#ifdef CONFIG_MMU
-#define AT91_IO_P2V(x) ((x) - 0x01000000)
-#else
-#define AT91_IO_P2V(x) (x)
-#endif
-
-#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
-
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
 #define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx

arch/arm/include/debug/clps711x.S

@@ -9,10 +9,10 @@
 
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x0000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x0000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x0000)
 #else
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x1000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x1000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x1000)
 #endif
 
 #define SYSFLG		(0x0140)

arch/arm/include/debug/exynos.S

@@ -24,7 +24,11 @@
 		mrc	p15, 0, \tmp, c0, c0, 0
 		and	\tmp, \tmp, #0xf0
 		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0