Add default keymaps for most of the build guides

keebio · Sep 30, 2024 · de6ea10 · de6ea10
1 parent d0f4bbb
commit de6ea10
Show file tree

Hide file tree

Showing 9 changed files with 37 additions and 1 deletion.
diff --git a/docs/foldkb-build-guide.md b/docs/foldkb-build-guide.md
@@ -19,3 +19,7 @@ For the Rev. 1.0 PCB, a trace is missing on the left 1.5u thumb key for the left
 To fix this, after solder all of the switches, add a jumper wire between these two pins as shown below:
 
 ![](./assets/images/foldkb/jumper-1.5u.jpg)
+
+## Default Keymap
+
+Here's the default keymap if you need it: [FoldKB Default Keymap](../static/layouts/keymap_FoldKB_rev1.pdf)
diff --git a/docs/iris-aluminum-case-build-guide.md b/docs/iris-aluminum-case-build-guide.md
@@ -178,6 +178,10 @@ Put the bottom part of the case on and then screw it to the top half.
 
 Add your keycaps and knob (if you have a rotary encoder)!
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf)
+
 ## Remapping/reprogramming Board
 
 Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard).

diff --git a/docs/iris-ce-build-guide.md b/docs/iris-ce-build-guide.md
@@ -103,6 +103,10 @@ Add keycaps to all of the switches.
 
 Repeat the same process for the other half of the keyboard.
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf)
+
 ## Remapping/reprogramming Board
 
 Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard).

diff --git a/docs/iris-rev3-build-guide.md b/docs/iris-rev3-build-guide.md
@@ -151,6 +151,10 @@ If you have an acrylic middle layer with tenting holes, here's a video on how to
 
 If you have a 3D-printed middle layer, see this page on installing it: [Iris 3D-printed Middle Layer Installation](iris-middle-layer)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf)
+
 ## Re-Program Board Note
 
 Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware).

diff --git a/docs/iris-rev6-build-guide.md b/docs/iris-rev6-build-guide.md
@@ -276,6 +276,10 @@ Done!
 
 ![](./assets/images/iris-rev6/IMG_7878.jpg)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf)
+
 ## Remapping/reprogramming Board
 
 Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard).

diff --git a/docs/iris-se-build-guide.md b/docs/iris-se-build-guide.md
@@ -174,6 +174,10 @@ Repeat the same process for the other half of the keyboard.
 
 ![](./assets/images/iris-se/IMG_1885.jpg)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Iris Default Keymap](../static/layouts/Iris%20Default%20Keymap.pdf)
+
 ## Remapping/reprogramming Board
 
 Looking to remap/reprogram your board? Check out our guide for [remapping your keyboard](remapping-keyboard).

diff --git a/docs/quefrency-hotswap-build-guide.md b/docs/quefrency-hotswap-build-guide.md
@@ -192,6 +192,10 @@ All done now, repeat for the other half of the board!
 
 ![](./assets/images/quefrency-rev4/IMG_5577.jpeg)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Quefrency Default Keymap](../static/layouts/keymap_Quefrency_rev3.pdf)
+
 ## Re-Programming Board Note
 
 Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware).

diff --git a/docs/sinc-rev3-build-guide.md b/docs/sinc-rev3-build-guide.md
@@ -74,6 +74,10 @@ Next, click on `Keymap` on the left side bar, and then click on the ISO Enter ke
 
 ![](./assets/images/sinc-rev3/via-keymap.jpg)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [Sinc Default Keymap](../static/layouts/keymap_Sinc_rev2.pdf)
+
 ## Reflashing Board
 
 If you'd like to reflash your Sinc, since it has a RP2040 controller on board, follow these instructions: [Flashing RP2040 Board](flashing-firmware#rp2040-board-uf2-bootloader)
diff --git a/docs/wtf60-build-guide.md b/docs/wtf60-build-guide.md
@@ -81,9 +81,13 @@ Insert screws through the plate to secure the PCB to the standoffs on the case.
 
 ![](./assets/images/wtf60/IMG_3191.jpeg)
 
+## Default Keymap
+
+Here's the default keymap if you need it: [WTF60 Default Keymap](../static/layouts/keymap_WTF60_rev1.pdf)
+
 ## Re-Programming Board Note
 
-Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware). 
+Oh, looking to re-program your board? Never fear! Come look [here](flashing-firmware).
 
 ## Rejoice!