Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Reserve ECAM so we don't assign it to PCI BARs; this works around
     bugs where BIOS included ECAM in a PNP0A03 host bridge window,
     didn't reserve it via a PNP0C02 motherboard device, and didn't
     allocate space for SR-IOV VF BARs (Bjorn Helgaas)

   - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)

   - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)

   - Log device type (Root Port, Switch Port, etc) during enumeration
     (Bjorn Helgaas)

   - Log bridges before downstream devices so the dmesg order is more
     logical (Bjorn Helgaas)

   - Log resource names (BAR 0, VF BAR 0, bridge window, etc)
     consistently instead of a mix of names and "reg 0x10" (Puranjay
     Mohan, Bjorn Helgaas)

   - Fix 64GT/s effective data rate calculation to use 1b/1b encoding
     rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
     Järvinen)

   - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
     lpfc (Ilpo Järvinen)

   - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)

  Resource management:

   - Restructure pci_dev_for_each_resource() to avoid computing the
     address of an out-of-bounds array element (the bounds check was
     performed later so the element was never actually *read*, but it's
     nicer to avoid even computing an out-of-bounds address) (Andy
     Shevchenko)

  Driver binding:

   - Convert pci-host-common.c platform .remove() callback to
     .remove_new() returning 'void' since it's not useful to return
     error codes here (Uwe Kleine-König)

   - Convert exynos, keystone, kirin from .remove() to .remove_new(),
     which returns void instead of int (Uwe Kleine-König)

   - Drop unused struct pci_driver.node member (Mathias Krause)

  Virtualization:

   - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)

  Error handling:

   - Log AER errors as "Correctable" (not "Corrected") or
     "Uncorrectable" to match spec terminology (Bjorn Helgaas)

   - Decode Requester ID when no error info found instead of printing
     the raw hex value (Bjorn Helgaas)

  Endpoint framework:

   - Use a unique test pattern for each BAR in the pci_endpoint_test to
     make it easier to debug address translation issues (Niklas Cassel)

  Broadcom STB PCIe controller driver:

   - Add DT property "brcm,clkreq-mode" and driver support for different
     CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)

  Freescale Layerscape PCIe controller driver:

   - Add suspend/resume support for Layerscape LS1043a and LS1021a,
     including software-managed PME_Turn_Off and transitions between L0,
     L2/L3_Ready Link states (Frank Li)

  MediaTek PCIe controller driver:

   - Clear MSI interrupt status before handler to avoid missing MSIs
     that occur after the handler (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 translation window setup to handle MMIO space
     that is not a power of two in size (Jianjun Wang)

  Qualcomm PCIe controller driver:

   - Increase qcom iommu-map maxItems to accommodate SDX55 (five
     entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)

   - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
     Kozlowski)

   - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
     Kozlowski)

   - Correct the qcom "reset-name" property, previously incorrectly
     called "reset-names" (Krzysztof Kozlowski)

   - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
     Armstrong)

  Renesas R-Car PCIe controller driver:

   - Replace of_device.h with explicit of.h include to untangle header
     usage (Rob Herring)

   - Add DT and driver support for optional miniPCIe 1.5v and 3.3v
     regulators on KingFisher (Wolfram Sang)

  SiFive FU740 PCIe controller driver:

   - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
     ARCH_SIFIVE (Conor Dooley)

  Synopsys DesignWare PCIe controller driver:

   - Align iATU mapping for endpoint MSI-X (Niklas Cassel)

   - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
     Shimoda)

   - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
     Shimoda)

   - Rename struct dw_pcie_ep_ops.func_conf_select() to
     .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)

   - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
     Shimoda)

  TI J721E PCIe driver:

   - Add j721e DT and driver support for 'num-lanes' for devices that
     support x1, x2, or x4 Links (Matt Ranostay)

   - Add j721e DT compatible strings and driver support for j784s4 (Matt
     Ranostay)

   - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
     specific to those TI SoC parts (Peter Robinson)

  TI Keystone PCIe controller driver:

   - Hold power management references to all PHYs while enabling them to
     avoid a race when one provides clocks to others (Siddharth
     Vadapalli)

  Xilinx XDMA PCIe controller driver:

   - Remove redundant dev_err(), since platform_get_irq() and
     platform_get_irq_byname() already log errors (Yang Li)

   - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
     (Krzysztof Wilczyński)

   - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
     irq_domain_add_linear() fails (Harshit Mogalapalli)

  MicroSemi Switchtec management driver:

   - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
     ioremapping in switchtec_pci_probe(). Previously the cleanup was
     done in stdev_release(), which used stale pointers if stdev->cdev
     happened to be open when the PCI device was removed (Daniel
     Stodden)

  Miscellaneous:

   - Convert interrupt terminology from "legacy" to "INTx" to be more
     specific and match spec terminology (Damien Le Moal)

   - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
     deprecated ida_simple_*() API with ida_alloc() and ida_free()
     (Christophe JAILLET)"

* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Fix kernel-doc issues
  PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
  dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
  PCI: mediatek-gen3: Fix translation window size calculation
  PCI: mediatek: Clear interrupt status before dispatching handler
  PCI: keystone: Fix race condition when initializing PHYs
  PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
  PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
  PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
  PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
  PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
  PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
  PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
  PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
  misc: pci_endpoint_test: Use a unique test pattern for each BAR
  PCI: j721e: Make TI J721E depend on ARCH_K3
  PCI: j721e: Add TI J784S4 PCIe configuration
  PCI/AER: Use explicit register sizes for struct members
  PCI/AER: Decode Requester ID when no error info found
  PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
  ...

Documentation/PCI/boot-interrupts.rst

@@ -61,7 +61,7 @@ Conditions
 ==========
 
 The use of threaded interrupts is the most likely condition to trigger
-this problem today. Threaded interrupts may not be reenabled after the IRQ
+this problem today. Threaded interrupts may not be re-enabled after the IRQ
 handler wakes. These "one shot" conditions mean that the threaded interrupt
 needs to keep the interrupt line masked until the threaded handler has run.
 Especially when dealing with high data rate interrupts, the thread needs to

Documentation/PCI/msi-howto.rst

@@ -236,7 +236,7 @@ including a full 'lspci -v' so we can add the quirks to the kernel.
 Disabling MSIs below a bridge
 -----------------------------
 
-Some PCI bridges are not able to route MSIs between busses properly.
+Some PCI bridges are not able to route MSIs between buses properly.
 In this case, MSIs must be disabled on all devices behind the bridge.
 
 Some bridges allow you to enable MSIs by changing some bits in their

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -64,6 +64,24 @@ properties:
 
   aspm-no-l0s: true
 
+  brcm,clkreq-mode:
+    description: A string that determines the operating
+      clkreq mode of the PCIe RC HW with respect to controlling the refclk
+      signal.  There are three different modes -- "safe", which drives the
+      refclk signal unconditionally and will work for all devices but does
+      not provide any power savings; "no-l1ss" -- which provides Clock
+      Power Management, L0s, and L1, but cannot provide L1 substate (L1SS)
+      power savings. If the downstream device connected to the RC is L1SS
+      capable AND the OS enables L1SS, all PCIe traffic may abruptly halt,
+      potentially hanging the system; "default" -- which provides L0s, L1,
+      and L1SS, but not compliant to provide Clock Power Management;
+      specifically, may not be able to meet the T_CLRon max timing of 400ns
+      as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI
+      Express Mini CEM 2.1 specification.  This situation is atypical and
+      should happen only with older devices.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ safe, no-l1ss, default ]
+
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to

Documentation/devicetree/bindings/pci/qcom,pcie.yaml

@@ -41,6 +41,10 @@ properties:
           - qcom,pcie-sm8450-pcie0
           - qcom,pcie-sm8450-pcie1
           - qcom,pcie-sm8550
+      - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -62,7 +66,8 @@ properties:
     maxItems: 8
 
   iommu-map:
-    maxItems: 2
+    minItems: 1
+    maxItems: 16
 
   # Common definitions for clocks, clock-names and reset.
   # Platform constraints are described later.
@@ -88,7 +93,7 @@ properties:
     minItems: 1
     maxItems: 12
 
-  resets-names:
+  reset-names:
     minItems: 1
     maxItems: 12
 
@@ -478,6 +483,33 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ref # REFERENCE clock
+            - const: tbu # PCIe TBU clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
   - if:
       properties:
         compatible:
@@ -526,8 +558,33 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pcie-sc8180x
               - qcom,pcie-sm8150
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ref # REFERENCE clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pcie-sm8250
     then:
       oneOf:

Documentation/devicetree/bindings/pci/rcar-pci-host.yaml

@@ -68,6 +68,15 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
 required:
   - compatible
   - reg
@@ -121,5 +130,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };

Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

@@ -49,6 +49,7 @@ properties:
       - description: APB clock for PCIe
       - description: Auxiliary clock for PCIe
       - description: PIPE clock
+      - description: Reference clock for PCIe
 
   clock-names:
     minItems: 5
@@ -59,6 +60,7 @@ properties:
       - const: pclk
       - const: aux
       - const: pipe
+      - const: ref
 
   interrupts:
     items:

Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml

@@ -10,13 +10,11 @@ title: TI J721E PCI EP (PCIe Wrapper)
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-ep.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-ep
+      - const: ti,j784s4-pcie-ep
       - description: PCIe EP controller in AM64
         items:
           - const: ti,am64-pcie-ep
@@ -65,6 +63,41 @@ properties:
     items:
       - const: link_state
 
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-ep
+            - ti,j721e-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-ep
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml

@@ -10,13 +10,11 @@ title: TI J721E PCI Host (PCIe Wrapper)
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
-allOf:
-  - $ref: cdns-pcie-host.yaml#
-
 properties:
   compatible:
     oneOf:
       - const: ti,j721e-pcie-host
+      - const: ti,j784s4-pcie-host
       - description: PCIe controller in AM64
         items:
           - const: ti,am64-pcie-host
@@ -94,6 +92,41 @@ properties:
       interrupts:
         maxItems: 1
 
+allOf:
+  - $ref: cdns-pcie-host.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-pcie-host
+    then:
+      properties:
+        num-lanes:
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j7200-pcie-host
+            - ti,j721e-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j784s4-pcie-host
+    then:
+      properties:
+        num-lanes:
+          minimum: 1
+          maximum: 4
+
 required:
   - compatible
   - reg

Documentation/driver-api/pci/p2pdma.rst

@@ -83,19 +83,9 @@ this to include other types of resources like doorbells.
 Client Drivers
 --------------
 
-A client driver typically only has to conditionally change its DMA map
-routine to use the mapping function :c:func:`pci_p2pdma_map_sg()` instead
-of the usual :c:func:`dma_map_sg()` function. Memory mapped in this
-way does not need to be unmapped.
-
-The client may also, optionally, make use of
-:c:func:`is_pci_p2pdma_page()` to determine when to use the P2P mapping
-functions and when to use the regular mapping functions. In some
-situations, it may be more appropriate to use a flag to indicate a
-given request is P2P memory and map appropriately. It is important to
-ensure that struct pages that back P2P memory stay out of code that
-does not have support for them as other code may treat the pages as
-regular memory which may not be appropriate.
+A client driver only has to use the mapping API :c:func:`dma_map_sg()`
+and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
+will do the right thing for the P2P capable memory.
 
 
 Orchestrator Drivers

arch/powerpc/sysdev/fsl_pci.c

@@ -54,7 +54,7 @@ static void quirk_fsl_pcie_early(struct pci_dev *dev)
 
 	/* if we aren't in host mode don't bother */
 	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
-	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+	if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 		return;
 
 	dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL;
@@ -581,7 +581,7 @@ static int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 		hose->ops = &fsl_indirect_pcie_ops;
 		/* For PCIE read HEADER_TYPE to identify controller mode */
 		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
-		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+		if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
 			goto no_bridge;
 
 	} else {

arch/x86/kernel/aperture_64.c

@@ -259,10 +259,9 @@ static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 							order);
 				}
 
-				/* No multi-function device? */
 				type = read_pci_config_byte(bus, slot, func,
 							       PCI_HEADER_TYPE);
-				if (!(type & 0x80))
+				if (!(type & PCI_HEADER_TYPE_MFD))
 					break;
 			}
 		}

arch/x86/kernel/early-quirks.c

@@ -779,13 +779,13 @@ static int __init check_dev_quirk(int num, int slot, int func)
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 
-	if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
+	if ((type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) {
 		sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS);
 		if (sec > num)
 			early_pci_scan_bus(sec);
 	}
 
-	if (!(type & 0x80))
+	if (!(type & PCI_HEADER_TYPE_MFD))
 		return -1;
 
 	return 0;

arch/x86/pci/acpi.c

@@ -283,6 +283,9 @@ static int setup_mcfg_map(struct acpi_pci_root_info *ci)
 	info->mcfg_added = false;
 	seg = info->sd.domain;
 
+	dev_dbg(dev, "%s(%04x %pR ECAM %pa)\n", __func__, seg,
+		&root->secondary, &root->mcfg_addr);
+
 	/* return success if MMCFG is not in use */
 	if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
 		return 0;