Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set contains mostly fixes to existing drivers as well as cleanup
  of code that's not been in active use for a while"

* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
  acpi: lpss: call pwm_add_table() for BSW PWM device
  pwm: Try to load modules during pwm_get()
  pwm: Don't hold pwm_lookup_lock longer than necessary
  pwm: Make the PWM_POLARITY flag in DTB optional
  pwm: Print error messages with pr_err() instead of pr_debug()
  pwm: imx: Add polarity inversion support to i.MX's PWMv2
  pwm: imx: doc: Update imx-pwm.txt documentation entry
  pwm: imx: Remove redundant i.MX PWMv2 code
  pwm: imx: Provide atomic PWM support for i.MX PWMv2
  pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
  pwm: imx: Move PWMv2 software reset code to a separate function
  pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
  pwm: imx: Add separate set of PWM ops for v1 and v2
  pwm: imx: Remove ipg clock and enable per clock when required
  pwm: lpss: Add Intel Gemini Lake PCI ID
  pwm: lpss: Do not export board infos for different PWM types
  pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
  pwm: lpss: Switch to new atomic API
  pwm: lpss: Allow duty cycle to be 0
  pwm: lpss: Avoid potential overflow of base_unit
  ...

Documentation/devicetree/bindings/pwm/imx-pwm.txt

@@ -6,8 +6,8 @@ Required properties:
   - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
   - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
-  the cells format.
+- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt
+  in this directory for a description of the cells format.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
@@ -17,7 +17,7 @@ See the clock consumer binding,
 Example:
 
 pwm1: pwm@53fb4000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 	reg = <0x53fb4000 0x4000>;
 	clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,

drivers/acpi/acpi_lpss.c

@@ -21,6 +21,7 @@
 #include <linux/platform_data/x86/pmc_atom.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
+#include <linux/pwm.h>
 #include <linux/delay.h>
 
 #include "internal.h"
@@ -154,6 +155,18 @@ static void byt_i2c_setup(struct lpss_private_data *pdata)
 	writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 }
 
+/* BSW PWM used for backlight control by the i915 driver */
+static struct pwm_lookup bsw_pwm_lookup[] = {
+	PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
+			       "pwm_backlight", 0, PWM_POLARITY_NORMAL,
+			       "pwm-lpss-platform"),
+};
+
+static void bsw_pwm_setup(struct lpss_private_data *pdata)
+{
+	pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
+}
+
 static const struct lpss_device_desc lpt_dev_desc = {
 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 	.prv_offset = 0x800,
@@ -191,6 +204,7 @@ static const struct lpss_device_desc byt_pwm_dev_desc = {
 
 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 	.flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+	.setup = bsw_pwm_setup,
 };
 
 static const struct lpss_device_desc byt_uart_dev_desc = {

drivers/leds/leds-pwm.c

@@ -29,7 +29,6 @@ struct led_pwm_data {
 	unsigned int		active_low;
 	unsigned int		period;
 	int			duty;
-	bool			can_sleep;
 };
 
 struct led_pwm_priv {
@@ -49,8 +48,8 @@ static void __led_pwm_set(struct led_pwm_data *led_dat)
 		pwm_enable(led_dat->pwm);
 }
 
-static void led_pwm_set(struct led_classdev *led_cdev,
-	enum led_brightness brightness)
+static int led_pwm_set(struct led_classdev *led_cdev,
+		       enum led_brightness brightness)
 {
 	struct led_pwm_data *led_dat =
 		container_of(led_cdev, struct led_pwm_data, cdev);
@@ -66,12 +65,7 @@ static void led_pwm_set(struct led_classdev *led_cdev,
 	led_dat->duty = duty;
 
 	__led_pwm_set(led_dat);
-}
 
-static int led_pwm_set_blocking(struct led_classdev *led_cdev,
-	enum led_brightness brightness)
-{
-	led_pwm_set(led_cdev, brightness);
 	return 0;
 }
 
@@ -112,11 +106,7 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 		return ret;
 	}
 
-	led_data->can_sleep = pwm_can_sleep(led_data->pwm);
-	if (!led_data->can_sleep)
-		led_data->cdev.brightness_set = led_pwm_set;
-	else
-		led_data->cdev.brightness_set_blocking = led_pwm_set_blocking;
+	led_data->cdev.brightness_set_blocking = led_pwm_set;
 
 	/*
 	 * FIXME: pwm_apply_args() should be removed when switching to the

drivers/pwm/Kconfig

@@ -76,7 +76,9 @@ config PWM_ATMEL_TCB
 
 config PWM_BCM_IPROC
 	tristate "iProc PWM support"
-	depends on ARCH_BCM_IPROC
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM_IPROC
 	help
 	  Generic PWM framework driver for Broadcom iProc PWM block. This
 	  block is used in Broadcom iProc SoC's.

drivers/pwm/core.c

@@ -137,9 +137,14 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
 {
 	struct pwm_device *pwm;
 
+	/* check, whether the driver supports a third cell for flags */
 	if (pc->of_pwm_n_cells < 3)
 		return ERR_PTR(-EINVAL);
 
+	/* flags in the third cell are optional */
+	if (args->args_count < 2)
+		return ERR_PTR(-EINVAL);
+
 	if (args->args[0] >= pc->npwm)
 		return ERR_PTR(-EINVAL);
 
@@ -148,11 +153,10 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
 		return pwm;
 
 	pwm->args.period = args->args[1];
+	pwm->args.polarity = PWM_POLARITY_NORMAL;
 
-	if (args->args[2] & PWM_POLARITY_INVERTED)
+	if (args->args_count > 2 && args->args[2] & PWM_POLARITY_INVERTED)
 		pwm->args.polarity = PWM_POLARITY_INVERSED;
-	else
-		pwm->args.polarity = PWM_POLARITY_NORMAL;
 
 	return pwm;
 }
@@ -163,9 +167,14 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
 {
 	struct pwm_device *pwm;
 
+	/* sanity check driver support */
 	if (pc->of_pwm_n_cells < 2)
 		return ERR_PTR(-EINVAL);
 
+	/* all cells are required */
+	if (args->args_count != pc->of_pwm_n_cells)
+		return ERR_PTR(-EINVAL);
+
 	if (args->args[0] >= pc->npwm)
 		return ERR_PTR(-EINVAL);
 
@@ -663,24 +672,17 @@ struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
 	err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
 					 &args);
 	if (err) {
-		pr_debug("%s(): can't parse \"pwms\" property\n", __func__);
+		pr_err("%s(): can't parse \"pwms\" property\n", __func__);
 		return ERR_PTR(err);
 	}
 
 	pc = of_node_to_pwmchip(args.np);
 	if (IS_ERR(pc)) {
-		pr_debug("%s(): PWM chip not found\n", __func__);
+		pr_err("%s(): PWM chip not found\n", __func__);
 		pwm = ERR_CAST(pc);
 		goto put;
 	}
 
-	if (args.args_count != pc->of_pwm_n_cells) {
-		pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
-			 args.np->full_name);
-		pwm = ERR_PTR(-EINVAL);
-		goto put;
-	}
-
 	pwm = pc->of_xlate(pc, &args);
 	if (IS_ERR(pwm))
 		goto put;
@@ -757,12 +759,13 @@ void pwm_remove_table(struct pwm_lookup *table, size_t num)
  */
 struct pwm_device *pwm_get(struct device *dev, const char *con_id)
 {
-	struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
 	const char *dev_id = dev ? dev_name(dev) : NULL;
-	struct pwm_chip *chip = NULL;
+	struct pwm_device *pwm;
+	struct pwm_chip *chip;
 	unsigned int best = 0;
 	struct pwm_lookup *p, *chosen = NULL;
 	unsigned int match;
+	int err;
 
 	/* look up via DT first */
 	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
@@ -817,24 +820,35 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
 		}
 	}
 
-	if (!chosen) {
-		pwm = ERR_PTR(-ENODEV);
-		goto out;
-	}
+	mutex_unlock(&pwm_lookup_lock);
+
+	if (!chosen)
+		return ERR_PTR(-ENODEV);
 
 	chip = pwmchip_find_by_name(chosen->provider);
+
+	/*
+	 * If the lookup entry specifies a module, load the module and retry
+	 * the PWM chip lookup. This can be used to work around driver load
+	 * ordering issues if driver's can't be made to properly support the
+	 * deferred probe mechanism.
+	 */
+	if (!chip && chosen->module) {
+		err = request_module(chosen->module);
+		if (err == 0)
+			chip = pwmchip_find_by_name(chosen->provider);
+	}
+
 	if (!chip)
-		goto out;
+		return ERR_PTR(-EPROBE_DEFER);
 
 	pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
 	if (IS_ERR(pwm))
-		goto out;
+		return pwm;
 
 	pwm->args.period = chosen->period;
 	pwm->args.polarity = chosen->polarity;
 
-out:
-	mutex_unlock(&pwm_lookup_lock);
 	return pwm;
 }
 EXPORT_SYMBOL_GPL(pwm_get);
@@ -960,18 +974,6 @@ void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(devm_pwm_put);
 
-/**
-  * pwm_can_sleep() - report whether PWM access will sleep
-  * @pwm: PWM device
-  *
-  * Returns: True if accessing the PWM can sleep, false otherwise.
-  */
-bool pwm_can_sleep(struct pwm_device *pwm)
-{
-	return true;
-}
-EXPORT_SYMBOL_GPL(pwm_can_sleep);
-
 #ifdef CONFIG_DEBUG_FS
 static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
 {

drivers/pwm/pwm-atmel-hlcdc.c

@@ -270,7 +270,6 @@ static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
 	chip->chip.npwm = 1;
 	chip->chip.of_xlate = of_pwm_xlate_with_flags;
 	chip->chip.of_pwm_n_cells = 3;
-	chip->chip.can_sleep = 1;
 
 	ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED);
 	if (ret) {

drivers/pwm/pwm-atmel.c

@@ -385,7 +385,6 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 
 	atmel_pwm->chip.base = -1;
 	atmel_pwm->chip.npwm = 4;
-	atmel_pwm->chip.can_sleep = true;
 	atmel_pwm->config = data->config;
 	atmel_pwm->updated_pwms = 0;
 	mutex_init(&atmel_pwm->isr_lock);

drivers/pwm/pwm-bcm-kona.c

@@ -276,7 +276,6 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 	kp->chip.npwm = 6;
 	kp->chip.of_xlate = of_pwm_xlate_with_flags;
 	kp->chip.of_pwm_n_cells = 3;
-	kp->chip.can_sleep = true;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	kp->base = devm_ioremap_resource(&pdev->dev, res);

drivers/pwm/pwm-berlin.c

@@ -206,7 +206,6 @@ static int berlin_pwm_probe(struct platform_device *pdev)
 	pwm->chip.ops = &berlin_pwm_ops;
 	pwm->chip.base = -1;
 	pwm->chip.npwm = 4;
-	pwm->chip.can_sleep = true;
 	pwm->chip.of_xlate = of_pwm_xlate_with_flags;
 	pwm->chip.of_pwm_n_cells = 3;
 

drivers/pwm/pwm-bfin.c

@@ -103,7 +103,7 @@ static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	disable_gptimer(priv->pin);
 }
 
-static struct pwm_ops bfin_pwm_ops = {
+static const struct pwm_ops bfin_pwm_ops = {
 	.request = bfin_pwm_request,
 	.free = bfin_pwm_free,
 	.config = bfin_pwm_config,

drivers/pwm/pwm-brcmstb.c

@@ -270,7 +270,6 @@ static int brcmstb_pwm_probe(struct platform_device *pdev)
 	p->chip.ops = &brcmstb_pwm_ops;
 	p->chip.base = -1;
 	p->chip.npwm = 2;
-	p->chip.can_sleep = true;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	p->base = devm_ioremap_resource(&pdev->dev, res);

drivers/pwm/pwm-fsl-ftm.c

@@ -446,7 +446,6 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	fpc->chip.of_pwm_n_cells = 3;
 	fpc->chip.base = -1;
 	fpc->chip.npwm = 8;
-	fpc->chip.can_sleep = true;
 
 	ret = pwmchip_add(&fpc->chip);
 	if (ret < 0) {