Build Package Requirements

Organized by End Item

• To Be Modified

  |- OpenHornet Simulator (OHS)
     |- Upper Instrument Panel (UIP)
     |- Lower Instrument Panel (LIP)
     |- Left Console (LC)
     |- Right Console (RC)
     |- Center Tub (CT)
     |- Ejection Seat (ES)
  

Assembly & Fabrication Drawings

• Only the OH Drawing Template shall be used for all MCAD drawings.
• All drawings will be arranged using third angle projection.
• Standard notes shall be used, and tailored as required.
• All lettering shall use upper case only, except where permitted (i.e. "mm" not "MM").
• Use a parts list for each assembly in the drawing. (Fusion is not capable of additional dash-number columns.)
• Do not section hardware (bearings, screws, fasteners, etc.)
• Use "FN" for Find Number, "FL" for Flag Note.
• Mark parts not to be ordered as "REF" or if included with another part as "PART OF FN x" where x is the FN of the part the sub-part is included with.
• Initial revision shall be rev "-", not blank.

External document references:

• All references to panel build: OH-SPEC-0001: Panels (Add actual flag note)
• All drawings with an electronic component will refer to the appropriate interconnect. (Fill out with actual list of flag notes)

Items to verify on drawing revision:

1. Uses latest flag note 2.

Interconnect Diagrams

TBD

Parts Lists

TBD

Fabrication Files

• In all cases, file extensions may be either upper or lower case, i.e. .SVG or .svg.

SVG Files

• SVGs shall be named based upon the following criteria, where rev is the drawing revision. The first revision shall be "-":
• <MATERIAL>_<MATERIAL COLOR, IF APPLICABLE>_<THICKNESS, IN DECIMAL INCHES>_<PN>_<DESCRIPTION>_<REV>_V<VERSION NUMBER OF MODEL>.SVG
  • MDF_.750_OH1A3A2-28_RIB 7B_-_V55.SVG
  • ACRYLIC_WHITE_.125_OH4A7-384_PART DESCRIPTION 3_C_V33.SVG
  • ACRYLIC_CLEAR_.250_OH3A7-123_PART DESCRIPTION 749_A_V15.SVG

3MF Files

• All 3D Printed parts shall have an 3MF file.
• They should be saved in an optimal print orientation to minimize the need for support material, and face against print bed when item is operator-facing. (This requirement is a should. It's not easy to do natively from F360.)
• 3MFs shall be saved with a High refinement.
• Each file shall be named based upon the drawing revision and print type. The first revision shall be "-":
  • FDM_<PN>_<DESCRIPTION>_<REV>_V<VERSION # OF MODEL>.3MF (i.e. FDM_OH1A1A1-483_PART 2B_-_v22.3MF)
  • RESN_<PN>_<DESCRIPTION>_<REV>_V<VERSION # OF MODEL>.3MF (i.e. RESN_OH1A1A2-374_PART 7A_-_v27.3MF)

STEP Files

• All machined or bent parts shall have a STEP file.
• Format to be STEP214.
• Each file shall be named based upon the drawing revision and print type. The first revision shall be "-":
  • <PN>_<DESCRIPTION>_<REV>_V<VERSION # OF MODEL>.STEP (i.e. FDM_OH1A1A1-483_PART 2B_-_v22.STEP)

PDF Files

• All decals or other traditionally ink printed parts shall have a vector-based PDF.
• Each file shall be named based upon the drawing revision and print type. The first revision shall be "-":
  • <PN>_<DESCRIPTION>_<REV>_V<VERSION # OF MODEL>.PDF (i.e. FDM_OH1A1A1-483_PART 2B_-_v22.PDF)

Electronics Manufacturing Files

TBD

HOWTOs

SVG

• Download the ...

3MF

• In Fusion360: Use the 3D Print on the Utilities Tab...

STEP

• TBD

Beta1 Release Package Errata

• A number of drawings may state manufacturing files are DXF/STL. We changed the requirement to use SVG and 3MF files mid-stream of drawing generation. We did not revise all the completed drawings (usually Note 2) to reflect this. They will be updated at their next revision on an attrition basis.