WeatherFlow-2-MQTT for Home Assistant

This project monitors the UDP socket (50222) from a WeatherFlow Hub, and publishes the data to a MQTT Server. Data is formatted in a way that, it supports the MQTT Discovery format for Home Assistant, so a sensor will created for each entity that WeatherFlow sends out, if you have MQTT Discovery enabled.

Everything runs in a pre-built Docker Container, so installation is very simple. You only need Docker installed on a computer and a MQTT Server setup somewhere in your network. If you run either the Operating System or Supervised installation of Home Assistant, you will have easy access to both.

There is support for both the AIR & SKY devices and the TEMPEST device.

Please review Breaking Changes prior to updating your instance. Breaking changes will be listed in https://github.com/briis/hass-weatherflow2mqtt/blob/main/CHANGELOG.md

Table of Contents

1. Installation
2. Docker Setup
   1. Docker Volume
   2. Docker Environment Variables
3. Available Sensors
   1. Sensor Structure
   2. High and Low Values
   3. Long Term Statistics
   4. Sensors in Developement
4. Creating a Home Assistant Weather Entity
5. Creating a Developement Environment

Installation

Prerequisites

A MQTT Server must be setup and configured on your local network, before installing this component. If you run a Supervised Home Assistant installation, we recommend using the MQTT Add-On available for this, else you must set it up yourself. See more here for installing MQTT.

Home Assistant Supervised

This is the easiest installation method. Just click on the blue ADD REPOSITORY button at the top of this README and you will be taken to your Home Assistant instance to add this repository to the Add-On Store. From there, scroll down to find "WeatherFlow to MQTT" and then install, configure (optional) and start the add-on.

NOTE: Make sure that you already have setup a Working MQTT broker, and easiest way to do that is by using the MQTT broker from the Official Add-On store.

Outside Home Assistant using Docker

• Ensure Docker is setup and running
• Ensure there is a MQTT Server available
• Open a Terminal on the Machine you want to run the Docker container on.
• Make a new Directory: mkdir weatherflow2mqtt (or some other name) and change to that directory.
• If you don't want all sensors setup, copy the config_example_TEMPEST.yaml or config_example_AIR_SKY.yaml file from this repo to that directory, and rename it to config.yaml. Then add or remove the sensors you want from the available sensors list. If you don't do this, all sensors from the Available Sensors will be added.
• Now start the Docker Container with the parameters described under docker-setup

If everything is setup correctly with MQTT and Home Assistant, you should now start seeing the sensors show up in HA. NOTE, it can take up to 1 min after startup, before all sensors are populated with data.

Docker Setup

The below command will pull the latest docker image and start WeatherFlow2MQTT for timezone Europe/Copenhagen and save data in the directory you are placed in when you launch the command. Ensure that you have replaced the Environment variables with your specific data. See description below.

If you are using docker-compose you can use the docker-compose.yml file and make the modifications for your environment.

docker run -d \
--name=weatherflow2mqtt --restart=unless-stopped \
-v $(pwd):/data \
-p 0.0.0.0:50222:50222/udp \
-e TZ=Europe/Copenhagen \
-e UNIT_SYSTEM=metric \
-e LANGUAGE=en \
-e RAPID_WIND_INTERVAL=0 \
-e DEBUG=False \
-e ELEVATION=0 \
-e LATITUDE=00.0000 \
-e LONGITUDE=000.0000 \
-e ZAMBRETTI_MIN_PRESSURE=960 \
-e ZAMBRETTI_MAX_PRESSURE=1060 \
-e WF_HOST=0.0.0.0 \
-e WF_PORT=50222 \
-e MQTT_HOST=127.0.0.1 \
-e MQTT_PORT=1883 \
-e MQTT_USERNAME= \
-e MQTT_PASSWORD= \
-e MQTT_DEBUG=False \
-e STATION_ID= \
-e STATION_TOKEN= \
-e FORECAST_INTERVAL=30 \
briis/weatherflow2mqtt:latest

The container is build for both Intel and ARM platforms, so it should work on most HW types. Please create an issue, if there is a platform for which it does not work.

Docker Volume

-v YOUR_STORAGE_AREA:/data Please replace YOUR_STORAGE_AREA with a directory where Docker will have read and write access. Once the program runs, a SQLite Database with the name weatherflow2mqtt.db will be created in this directory. This database is used to hold some calculated values, store temporary data used for calculations and to ensure that you don't start from 0 if you have to restart Home Assistant or the container. This is also where you can place the config.yaml file if you don't want all the sensors (see Installation).

Docker Environment Variables

A description of the Environment Variables available for this container. All of them have a default value, so you only need to add the onces where you want to change that.

• TZ: Set your local Timezone. It is important that you use the right timezone here, or else some of the calculations done by the container will not be correct. Default Timezone is Europe/Copenhagen (Required)
• UNIT_SYSTEM: Enter imperial or metric. This will determine the unit system used when displaying the values. Default is metric
• LANGUAGE: Use this to set the language for Wind Direction cardinals and other sensors with text strings as state value. These strings will then be displayed in HA in the selected language. See section Supported Languages
• RAPID_WIND_INTERVAL: The weather stations delivers wind speed and bearing every 2 seconds. If you don't want to update the HA sensors so often, you can set a number here (in seconds), for how often they are updated. Default is 0, which means data are updated when received from the station.
• ELEVATION: Set the hight above sea level for where the station is placed. This is used when calculating some of the sensor values. Station elevation plus Device height above ground. The value has to be in meters (meters = feet * 0.3048). Default is 0
• LATITUDE: Set the Latitude where the Station is located. Default is 00.0000.
• LONGITUDE: Set the Longitude where the Station is located. Default is 000.0000.
• ZAMBRETTI_MIN_PRESSURE: All Time Low Sea Level Pressure. Default is 960 (Mb for Metric) or Default is 28.35 (inHG for Imperial)
• ZAMBRETTI_MAX_PRESSURE: All Time High Sea Level Pressure. Default is 1060 (Mb for Metric) or Default is 31.30 (inHG for Imperial)
• WF_HOST: Unless you have a very special IP setup or the Weatherflow hub is on a different network, you should not change this. Default is 0.0.0.0
• WF_PORT: Weatherflow always broadcasts on port 50222/udp, so don't change this. Default is 50222
• MQTT_HOST: The IP address of your mqtt server. Even though you have the MQTT Server on the same machine as this Container, don't use 127.0.0.1 as this will resolve to an IP Address inside your container. Use the external IP Address. Default value is 127.0.0.1 (Required)
• MQTT_PORT: The Port for your mqtt server. Default value is 1883
• MQTT_USERNAME: The username used to connect to the mqtt server. Leave blank to use Anonymous connection. Default value is blank
• MQTT_PASSWORD: The password used to connect to the mqtt server. Leave blank to use Anonymous connection. Default value is blank
• MQTT_DEBUG: Set this to True, to get some more mqtt debugging messages in the Container log file. Default value is False
• DEBUG: Set this to True to enable more debug data in the Container Log. Default is False
• STATION_ID: Enter your Station ID for your WeatherFlow Station. Default value is blank. The correct STATION_ID is the number that you see when you access your Station from the Tempest Web APP. For example when you are on https://tempestwx.com/station/XXXXX/
• STATION_TOKEN: Enter your personal access Token to allow retrieval of data. If you don't have the token login with your account and create the token. NOTE You must own a WeatherFlow station to get this token. Default value is blank
• FORECAST_INTERVAL: The interval in minutes, between updates of the Forecast data. Default value is 30 minutes.
• briis/weatherflow2mqtt:<tag>: latest for the latest stable build, dev for the latest build (may not be stable due to development/testing build). Once dev build is verified latest build and dev will be identical. Latest features will be tested in dev build before released to latest.

Supported Languages

Currently these languages are supported for Wind Cardinals and other Text state strings:

• en: English
• da: Danish
• de: German
• fr: French
• nl: Dutch

If you would like to assist in translating to a new language, do the following:

• From the translations directory on this Github Project, download the file en.json
• Rename the file to YourLanguageCode.json - example for Spanish rename it to es.json
• Edit the file and translate the strings
• Make a pull request in Github and attach the file.

Available Sensors

Here is the list of sensors that the program generates. Calculated Sensor means, if No, then data comes directly from the Weather Station, if yes, it is a sensor that is derived from some of the other sensors. For a copy ready list see further below

Sensor ID	Name	Description	Calculated Sensor	Default Units
absolute_humidity	Absolute Humidity	The amount of water per volume of air	Yes	g/m^3
air_density	Air Density	The Air density	Yes	kg/m^3
air_temperature	Temperature	Outside Temperature	No	C°
battery	Battery	The battery level on the sensor (If present)	Yes	%
battery_mode	Battery Mode	The battery operating mode on the TEMPEST unit (If present)	Yes	https://help.weatherflow.com/hc/en-us/articles/360048877194-Solar-Power-Rechargeable-Battery
beaufort	Beaufort Scale	Beaufort scale is an empirical measure that relates wind speed to observed conditions at sea or on land	Yes	#
cloud_base	Cloud Base Altitude	The estimated altitude above mean sea level (AMSL) to the cloud base	Yes	m
current_conditions	Local Current Conditions	The estimated current weather conditions derived from only local sensors in Home Assistant format	Yes	https://www.home-assistant.io/integrations/weather/
current_conditions_txt	Local Current Conditions Text	The estimated current weather conditions derived from only local sensors in human readable text	Yes	Clear Night, Cloudy, Fog, Hail, Lightning, Lightning & Rain, Partly Cloudy, Pouring Rain, Rain, Snow, Snow & Rain, Sunny, Windy, Wind & Rain, exceptional (not used)
delta_t	Delta T	Difference between Air Temperature and Wet Bulb Temperature	Yes	C°
dewpoint	Dew Point	Dewpoint in degrees	Yes	C°
dewpoint_description	Dewpoint Comfort Level	Textual representation of the Dewpoint value	Yes
feelslike	Feels Like Temperature	The apparent temperature, a mix of Heat Index and Wind Chill	Yes	C°
fog_probability	Fog Probability	The probability of fog based on current conditions	Yes	%
freezing_level	Freezing Level Altitude	The estimated altitude above mean sea level (AMSL) where the temperature is at the freezing point (0°C/32°F)	Yes	m
illuminance	Illuminance	How much the incident light illuminates the surface	No	Lux
lightning_strike_count	Lightning Count	Number of lightning strikes in the last minute	Yes	#
lightning_strike_count_1hr	Lightning Count (Last hour)	Number of lightning strikes during the last hour	Yes
lightning_strike_count_3hr	Lightning Count (3 hours)	Number of lightning strikes the last 3 hours	Yes
lightning_strike_count_today	Lightning Count (Today)	Number of lightning strikes current day	Yes
lightning_strike_distance	Lightning Distance	Distance of the last strike	No	km
lightning_strike_energy	Lightning Energy	Energy of the last strike	No
lightning_strike_time	Last Lightning Strike	When the last lightning strike occurred	Yes
precipitation_type	Precipitation Type	Can be one of None, Rain or Hail	No	0 = none, 1 = rain, 2 = hail, 3 = rain + hail (heavy rain)
pressure_trend	Pressure Trend	Returns Steady, Falling or Rising determined by the rate of change over the past 3 hours	Yes	trend_text
rain_intensity	Rain Intensity	A descriptive text of how much is it raining right now	Yes
rain_rate	Rain Rate	How much is it raining right now	Yes	mm/h
rain_start_time	Last Rain	When was the last time it rained	No	seconds
rain_today	Rain Today	Total rain for the current day. (Reset at midnight)	Yes	mm
rain_yesterday	Rain Yesterday	Total rain for yesterday (Reset at midnight)	Yes	mm
rain_duration_today	Rain Duration (Today)	Total rain minutes for the current day. (Reset at midnight)	Yes	minutes
rain_duration_yesterday	Rain Duration (Yesterday)	Total rain minutes yesterday	Yes	minutes
relative_humidity	Humidity	Relative Humidity	No	%
sealevel_pressure	Station Pressure	Preasure measurement at Sea Level	Yes	MB
snow_probability	Snow Probability	The probability of snow based on current conditions	Yes	%
status	Status	How long has the device been running and other HW details	No
solar_elevation	Solar Elevation	Sun Elevation in Degrees with respect to the Horizon	Yes	° (degree)
solar_insolation	Solar Insolation	Estimation of Solar Radiation at current sun elevation angle	Yes	W/m^2
solar_radiation	Solar Radiation	Electromagnetic radiation emitted by the sun	No	W/m^2
station_pressure	Station Pressure	Pressure measurement where the station is located	No	MB
status	Status	How long has the device been running and other HW details	No	Version Attribute returns the current version of this integration
temperature_description	Temperature Level	Textual representation of the Outside Air Temperature value	Yes	Text
uv	UV Index	The UV index	No	Index
uv_description	UV Level	Textual representation of the UV Index value	Yes
visibility	Visibility	Distance to the horizon	Yes	km
voltage	Voltage	The voltage on the sensor (If present)	No	Volts
wetbulb	Wet Bulb Temperature	Temperature of a parcel of air cooled to saturation (100% relative humidity)	Yes	C°
wet_bulb_globe_temperature	Wet Bulb Globe Temperature	The WetBulb Globe Temperature (WBGT) is a measure of the heat stress in direct sunlight, which takes into account: temperature, humidity, wind speed, sun angle and cloud cover (solar radiation).	Yes	C°
wind_bearing	Wind Bearing	Current measured Wind bearing in degrees	No	Degrees
wind_bearing_avg	Wind Bearing Avg	The average wind bearing in degrees	No	Degrees
wind_direction	Wind Direction	Current measured Wind bearing as compass symbol	Yes	Cardinal
wind_direction_avg	Wind Direction Avg	The average wind direction as a compass string	Yes	Cardinal
wind_gust	Wind Gust	Highest wind speed for the last minute	No	m/s
wind_lull	Wind Lull	Lowest wind for the last minute	No	m/s
wind_speed	Wind Speed	Current measured Wind Speed	No	m/s
wind_speed_avg	Wind Speed Avg	Average wind speed for the last minute	No	m/s
weather	Weather	Only available if STATION_ID and STATION_TOKEN have valid data (See above). State will be current condition, and forecast data will be in the attributes.	No
zambretti_number	Zambretti Number	Local Weather Forecast for the near future utilizing the Beteljuice Zambretti Algorhithm.	Yes	(0-25) number corresponds to Zambretti letters A-Z
zambretti_text	Zambretti Text	Local Weather Forecast for the near future utilizing the Beteljuice Zambretti Algorhithm.	Yes	Weather Forecast Text

Sensor Structure

See Available Sensors above for a description of each sensor.

sensors:
  - absolute_humidity
  - air_density
  - air_temperature
  - battery # voltage
  - battery_mode # support for Tempest devices only
  - beaufort
  - cloud_base
  - current_conditions
  - current_conditions_txt
  - delta_t
  - dewpoint
  - dewpoint_description
  - feelslike
  - fog_probability
  - freezing_level
  - illuminance
  - lightning_strike_count
  - lightning_strike_count_1hr
  - lightning_strike_count_3hr
  - lightning_strike_count_today
  - lightning_strike_distance
  - lightning_strike_energy
  - lightning_strike_time
  - precipitation_type
  - pressure_trend
  - rain_intensity
  - rain_rate
  - rain_start_time
  - rain_today
  - rain_yesterday
  - rain_duration_today
  - rain_duration_yesterday
  - relative_humidity
  - sealevel_pressure
  - snow_probability
  - solar_elevation
  - solar_insolation
  - solar_radiation
  - station_pressure
  - status
  - temperature_description
  - uv
  - uv_description
  - visibility
  - voltage
  - wbgt #Wet Bulb Globe Temperature
  - wetbulb
  - wind_bearing
  - wind_bearing_avg
  - wind_direction
  - wind_direction_avg
  - wind_gust
  - wind_lull
  - wind_speed
  - wind_speed_avg
  - weather
  - zambretti_number
  - zambretti_text

High and Low Values

For selected sensors high and low values are calculated and published to the attributes of the sensor. Currently daily, monthly and all-time values are calculated, but future values are planned. Only the sensors where it is relevant, will get a low value calculated. See the table further down, for the available sensors and what values to expect.

Here are the current attributes, that will be applied to the selected sensor:

Attribute Name	Description
max_day	Maximum value for the current day. Reset at midnight.
max_day_time	UTC time when the max value was recorded. Reset at midnight.
min_day	Minimum value for the current day. Reset at midnight.
min_day_time	UTC time when the min value was recorded. Reset at midnight.
max_month	Maximum value for the current month. Reset when new month.
max_month_time	UTC time when the max value was recorded. Reset when new month.
min_month	Minimum value for the current month. Reset when new month.
min_month_time	UTC time when the min value was recorded. Reset when new month.
max_all	Maximum value ever recorded. Updated at midnight every day.
max_all_time	UTC time when the all-time max value was recorded. Updated at midnight every day.
min_all	Minimum value ever recorded. Updated at midnight every day.
min_all_time	UTC time when the all-time min value was recorded. Updated at midnight every day.

The following sensors are displaying High and Low values:

Sensor ID	High Value	Low Value
air_temperature	Yes	Yes
dewpoint	Yes	Yes
illuminance	Yes	No
lightning_strike_count_today	Yes	No
lightning_strike_energy	Yes	No
rain_rate	Yes	No
rain_duration_today	Yes	No
relative_humidity	Yes	Yes
sealevel_pressure	Yes	Yes
solar_radiation	Yes	No
uv	Yes	No
wind_gust	Yes	No
wind_lull	Yes	No
wind_speed_avg	Yes	No

Home Assistant Long Term Statistics

These sensors have long term statistics (LTS) enabled in Home Assistant (HA), no action by user is required to have LTS collected by HA this is done with MQTT autodiscovery. To display LTS in HA using the Statistics Graph Card (type: statistics-graph) the 'stat types' that can be used with this integration are Mean, Min, and Max. It is the user's discreation as to how to display the information, but cases such as rain today 'Max' would be a more logical selection without 'Mean' or 'Min'. During testing there has not been a use case for this integration that 'Sum' was of any valid use. Air, Sky, and Tempest sensors are specific to those units.

https://data.home-assistant.io/docs/statistics/

air_density
battery
beaufort
delta_t
dewpoint
feelslike
relative_humidity
illuminance
lightning_strike_count_today
lightning_strike_distance
lightning_strike_energy
rain_duration_today
rain_rate
rain_today
sealevel_pressure
solar_elevation
solar_insolation
solar_radiation
station_pressure
air_temperature
uv
visibility
voltage
wet_bulb_globe_temperature
wetbulb
wind_bearing
wind_bearing_avg
wind_gust
wind_lull
wind_speed
wind_speed_avg

Sensors in Developement

Local Current Conditions in Home Assistant format (Dev Branch)
Local Current Conditions in Human Readable Text (will need translations)
Probability of Snow (Dev Branch)
Probability of Fog (Dev Branch)

Creating a Home Assistant Weather Entity

If you have enabled the Forecast option, then there is a possibility to create a Weather Entity that can be used in all the different Lovelace Cards available for Weather. You can do this by using the Weather Template.

Edit configuration.yaml and insert the following (replacing hub_hb_00000001 and tempest_st_00000001 with the appropriate ids of your sensors):

weather:
  - platform: template
    name: My Local Weather
    condition_template: "{{ states('sensor.hub_hb_00000001_weather') }}"
    # condition_template: "{{ states('tempest_st_00000001_current_conditions') }}" # Local Only Option
    temperature_template: "{{ states('sensor.tempest_st_00000001_temperature') | float}}"
    humidity_template: "{{ states('sensor.tempest_st_00000001_humidity')| int }}"
    pressure_template: "{{ states('sensor.tempest_st_00000001_sea_level_pressure')| float }}"
    wind_speed_template: "{{ ( states('sensor.tempest_st_00000001_wind_speed_avg') | float * 18 / 5 ) | round(2) }}"
    wind_bearing_template: "{{ states('sensor.tempest_st_00000001_wind_bearing_avg')| int }}"
    visibility_template: "{{ states('sensor.tempest_st_00000001_visibility')| float }}"
    forecast_template: "{{ state_attr('sensor.hub_hb_00000001_weather', 'hourly_forecast') }}"

• The weather entity expects km/h when using metric units, so the above example converts m/s to km/h. If you are using imperial units, the line should just be {{ states('sensor.tempest_st_00000001_wind_speed_avg') }}, again replacing tempest_st_00000001 with the appropriate id of your sensor
• For the forecast_template you can either use hourly_forecast or daily_forecast to get Hourly or Day based forecast.

Setup Dev environment

virtualenv -p `which python3` env
source env/bin/activate
python setup.py install

Then you just need to export the configuration

export TZ="America/Toronto"
export UNIT_SYSTEM="metric"
export LANGUAGE="en"
export RAPID_WIND_INTERVAL="0"
export DEBUG="True"
export EXTERNAL_DIRECTORY="."
export ELEVATION="30"
export WF_HOST="0.0.0.0"
export WF_PORT="50222"
export MQTT_HOST="..."
export MQTT_PORT="1883"
export MQTT_DEBUG="False"
export STATION_ID="..."
export STATION_TOKEN="..."
export FORECAST_INTERVAL="30"
export MQTT_USERNAME="..."
export MQTT_PASSWORD="..."

Then you can run the daemon with

weatherflow2mqtt