Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller <davem@davemloft.net>
joolstorrentecalo · Oct 30, 2017 · e1ea2f9 · e1ea2f9
2 parents aad93c7 + 0b07194
commit e1ea2f9
Show file tree

Hide file tree

Showing 252 changed files with 2,322 additions and 2,083 deletions.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
@@ -211,7 +211,9 @@ Description:
 		device, after it has been suspended at run time, from a resume
 		request to the moment the device will be ready to process I/O,
 		in microseconds.  If it is equal to 0, however, this means that
-		the PM QoS resume latency may be arbitrary.
+		the PM QoS resume latency may be arbitrary and the special value
+		"n/a" means that user space cannot accept any resume latency at
+		all for the given device.
 
 		Not all drivers support this attribute.  If it isn't supported,
 		it is not present.

diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {

diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
@@ -1108,14 +1108,6 @@ When kbuild executes, the following steps are followed (roughly):
     ld
 	Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
 
-    objcopy
-	Copy binary. Uses OBJCOPYFLAGS usually specified in
-	arch/$(ARCH)/Makefile.
-	OBJCOPYFLAGS_$@ may be used to set additional options.
-
-    gzip
-	Compress target. Use maximum compression to compress target.
-
 	Example:
 		#arch/x86/boot/Makefile
 		LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
@@ -1139,6 +1131,19 @@ When kbuild executes, the following steps are followed (roughly):
 	      resulting in the target file being recompiled for no
 	      obvious reason.
 
+    objcopy
+	Copy binary. Uses OBJCOPYFLAGS usually specified in
+	arch/$(ARCH)/Makefile.
+	OBJCOPYFLAGS_$@ may be used to set additional options.
+
+    gzip
+	Compress target. Use maximum compression to compress target.
+
+	Example:
+		#arch/x86/boot/compressed/Makefile
+		$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+			$(call if_changed,gzip)
+
     dtc
 	Create flattened device tree blob object suitable for linking
 	into vmlinux. Device tree blobs linked into vmlinux are placed
@@ -1219,7 +1224,7 @@ When kbuild executes, the following steps are followed (roughly):
 	that may be shared between individual architectures.
 	The recommended approach how to use a generic header file is
 	to list the file in the Kbuild file.
-	See "7.3 generic-y" for further info on syntax etc.
+	See "7.2 generic-y" for further info on syntax etc.
 
 --- 6.11 Post-link pass
 
@@ -1254,13 +1259,13 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-	--- 7.1 no-export-headers
+--- 7.1 no-export-headers
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-	--- 7.2 generic-y
+--- 7.2 generic-y
 
 	If an architecture uses a verbatim copy of a header from
 	include/asm-generic then this is listed in the file
@@ -1287,7 +1292,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 		Example: termios.h
 			#include <asm-generic/termios.h>
 
-	--- 7.3 generated-y
+--- 7.3 generated-y
 
 	If an architecture generates other header files alongside generic-y
 	wrappers, generated-y specifies them.
@@ -1299,7 +1304,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-	--- 7.5 mandatory-y
+--- 7.4 mandatory-y
 
 	mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
 	to define the minimum set of headers that must be exported in

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -9220,7 +9220,6 @@ F:	include/linux/isicom.h
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
 M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/musb/
 
@@ -10187,7 +10186,6 @@ F:	Documentation/parport*.txt
 
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
-M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.linux-foundation.org
@@ -10567,6 +10565,8 @@ M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Arnaldo Carvalho de Melo <acme@kernel.org>
 R:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+R:	Jiri Olsa <jolsa@redhat.com>
+R:	Namhyung Kim <namhyung@kernel.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -130,8 +130,8 @@ endif
 ifneq ($(KBUILD_OUTPUT),)
 # check that the output directory actually exists
 saved-output := $(KBUILD_OUTPUT)
-$(shell [ -d $(KBUILD_OUTPUT) ] || mkdir -p $(KBUILD_OUTPUT))
-KBUILD_OUTPUT := $(realpath $(KBUILD_OUTPUT))
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+								&& /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error failed to create output directory "$(saved-output)"))
 
@@ -697,11 +697,11 @@ KBUILD_CFLAGS += $(stackp-flag)
 
 ifeq ($(cc-name),clang)
 ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET	:= -target $(notdir $(CROSS_COMPILE:%-=%))
+CLANG_TARGET	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
 GCC_TOOLCHAIN	:= $(realpath $(dir $(shell which $(LD)))/..)
 endif
 ifneq ($(GCC_TOOLCHAIN),)
-CLANG_GCC_TC	:= -gcc-toolchain $(GCC_TOOLCHAIN)
+CLANG_GCC_TC	:= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
 KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
@@ -1399,7 +1399,7 @@ help:
 	@echo  '                    Build, install, and boot kernel before'
 	@echo  '                    running kselftest on it'
 	@echo  '  kselftest-clean - Remove all generated kselftest files'
-	@echo  '  kselftest-merge - Merge all the config dependencies of kselftest to existed'
+	@echo  '  kselftest-merge - Merge all the config dependencies of kselftest to existing'
 	@echo  '                    .config.'
 	@echo  ''
 	@echo 'Userspace tools targets:'

diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
@@ -181,10 +181,10 @@ alcor_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		/* note: IDSEL 17 is XLT only */
 		{16+13, 16+13, 16+13, 16+13, 16+13},	/* IdSel 17,  TULIP  */

diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
@@ -173,10 +173,10 @@ pc164_init_irq(void)
  * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
  */
 
-static inline int __init
+static inline int
 eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT  INTA  INTB  INTC   INTD */
 		{16+0, 16+0, 16+5,  16+9, 16+13},  /* IdSel 6,  slot 0, J25 */
 		{16+1, 16+1, 16+6, 16+10, 16+14},  /* IdSel 7,  slot 1, J26 */
@@ -203,10 +203,10 @@ eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
  */
 
-static inline int __init
+static inline int
 cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT   INTA  INTB  INTC   INTD */
 		{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5,  slot 2, J21 */
 		{ 16+0, 16+0, 16+5,  16+9, 16+13}, /* IdSel 6,  slot 0, J19 */
@@ -287,10 +287,10 @@ cia_cab_init_pci(void)
  * 
  */
 
-static inline int __init
+static inline int
 alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT   INTA  INTB   INTC   INTD */
 		{ 16+2, 16+2, 16+9,  16+13, 16+17}, /* IdSel  5, slot 2, J20 */
 		{ 16+0, 16+0, 16+7,  16+11, 16+15}, /* IdSel  6, slot 0, J29 */

diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
@@ -356,7 +356,7 @@ clipper_init_irq(void)
  *  10	 64 bit PCI option slot 3 (not bus 0)
  */
 
-static int __init
+static int
 isa_irq_fixup(const struct pci_dev *dev, int irq)
 {
 	u8 irq8;
@@ -372,10 +372,10 @@ isa_irq_fixup(const struct pci_dev *dev, int irq)
 	return irq8 & 0xf;
 }
 
-static int __init
+static int
 dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[6][5] __initdata = {
+	static char irq_tab[6][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
 		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
@@ -394,10 +394,10 @@ dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, irq);
 }
 
-static int __init
+static int
 monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[13][5] __initdata = {
+	static char irq_tab[13][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
@@ -423,7 +423,7 @@ monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
-static u8 __init
+static u8
 monet_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	struct pci_controller *hose = dev->sysdata;
@@ -456,10 +456,10 @@ monet_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-static int __init
+static int
 webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[13][5] __initdata = {
+	static char irq_tab[13][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
@@ -478,10 +478,10 @@ webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
-static int __init
+static int
 clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
 		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */

diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
@@ -167,10 +167,10 @@ eb64p_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT  INTA  INTB  INTC   INTD */
 		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
 		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */

diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
@@ -141,7 +141,7 @@ eiger_init_irq(void)
 	}
 }
 
-static int __init
+static int
 eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	u8 irq_orig;
@@ -158,7 +158,7 @@ eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq_orig - 0x80;
 }
 
-static u8 __init
+static u8
 eiger_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	struct pci_controller *hose = dev->sysdata;

diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
@@ -149,10 +149,10 @@ miata_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-        static char irq_tab[18][5] __initdata = {
+        static char irq_tab[18][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8},  /* IdSel 14,  DC21142 */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 15,  EIDE    */
@@ -196,7 +196,7 @@ miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 miata_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
@@ -145,10 +145,10 @@ mikasa_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[8][5] __initdata = {
+	static char irq_tab[8][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{16+12, 16+12, 16+12, 16+12, 16+12},	/* IdSel 17,  SCSI */
 		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 18,  PCEB */