Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: adding comment for ipaq forcing number of ports
  USB: fix Oops on loading ipaq module since 2.6.26
  USB: add a pl2303 device id
  USB: another option device id
  USB: don't lose disconnections during suspend
  USB: fix interrupt disabling for HCDs with shared interrupt handlers
  USB: New device ID for ftdi_sio driver
  sisusbvga: Fix oops on disconnect.
  USB: mass storage: new id for US_SC_CYP_ATACB
  USB: ohci - record data toggle after unlink
  USB: ehci - fix timer regression
  USB: fix cdc-acm resume()
  OHCI: Fix problem if SM501 and another platform driver is selected

drivers/usb/class/cdc-acm.c

@@ -1125,9 +1125,6 @@ static void stop_data_traffic(struct acm *acm)
 	for (i = 0; i < acm->rx_buflimit; i++)
 		usb_kill_urb(acm->ru[i].urb);
 
-	INIT_LIST_HEAD(&acm->filled_read_bufs);
-	INIT_LIST_HEAD(&acm->spare_read_bufs);
-
 	tasklet_enable(&acm->urb_task);
 
 	cancel_work_sync(&acm->work);

drivers/usb/core/hcd.c

@@ -1684,19 +1684,30 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
 	struct usb_hcd		*hcd = __hcd;
-	int			start = hcd->state;
+	unsigned long		flags;
+	irqreturn_t		rc;
 
-	if (unlikely(start == HC_STATE_HALT ||
-	    !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-		return IRQ_NONE;
-	if (hcd->driver->irq (hcd) == IRQ_NONE)
-		return IRQ_NONE;
+	/* IRQF_DISABLED doesn't work correctly with shared IRQs
+	 * when the first handler doesn't use it.  So let's just
+	 * assume it's never used.
+	 */
+	local_irq_save(flags);
 
-	set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+	if (unlikely(hcd->state == HC_STATE_HALT ||
+		     !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		rc = IRQ_NONE;
+	} else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+		rc = IRQ_NONE;
+	} else {
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
-	if (unlikely(hcd->state == HC_STATE_HALT))
-		usb_hc_died (hcd);
-	return IRQ_HANDLED;
+		if (unlikely(hcd->state == HC_STATE_HALT))
+			usb_hc_died(hcd);
+		rc = IRQ_HANDLED;
+	}
+
+	local_irq_restore(flags);
+	return rc;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1860,6 +1871,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	/* enable irqs just before we start the controller */
 	if (hcd->driver->irq) {
+
+		/* IRQF_DISABLED doesn't work as advertised when used together
+		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+		 * interrupts we can remove it here.
+		 */
+		irqflags &= ~IRQF_DISABLED;
+
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,

drivers/usb/core/hub.c

@@ -713,18 +713,11 @@ static void hub_restart(struct usb_hub *hub, int type)
 		}
 
 		/* Was the power session lost while we were suspended? */
-		switch (type) {
-		case HUB_RESET_RESUME:
-			portstatus = 0;
-			portchange = USB_PORT_STAT_C_CONNECTION;
-			break;
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
 
-		case HUB_RESET:
-		case HUB_RESUME:
-			status = hub_port_status(hub, port1,
-					&portstatus, &portchange);
-			break;
-		}
+		/* If the device is gone, khubd will handle it later */
+		if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
+			continue;
 
 		/* For "USB_PERSIST"-enabled children we must
 		 * mark the child device for reset-resume and

drivers/usb/host/ehci.h

@@ -177,6 +177,15 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
 static inline void
 timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 {
+	/* Don't override timeouts which shrink or (later) disable
+	 * the async ring; just the I/O watchdog.  Note that if a
+	 * SHRINK were pending, OFF would never be requested.
+	 */
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
+
 	if (!test_and_set_bit (action, &ehci->actions)) {
 		unsigned long t;
 
@@ -192,15 +201,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 			t = EHCI_SHRINK_JIFFIES;
 			break;
 		}
-		t += jiffies;
-		// all timings except IAA watchdog can be overridden.
-		// async queue SHRINK often precedes IAA.  while it's ready
-		// to go OFF neither can matter, and afterwards the IO
-		// watchdog stops unless there's still periodic traffic.
-		if (time_before_eq(t, ehci->watchdog.expires)
-				&& timer_pending (&ehci->watchdog))
-			return;
-		mod_timer (&ehci->watchdog, t);
+		mod_timer(&ehci->watchdog, t + jiffies);
 	}
 }
 

drivers/usb/host/ohci-hcd.c

@@ -1054,14 +1054,15 @@ MODULE_LICENSE ("GPL");
 
 #ifdef CONFIG_MFD_SM501
 #include "ohci-sm501.c"
-#define PLATFORM_DRIVER		ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
 #endif
 
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OF_PLATFORM_DRIVER) &&	\
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
+	!defined(SM501_OHCI_DRIVER) && \
 	!defined(SSB_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
@@ -1121,9 +1122,18 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_ssb;
 #endif
 
+#ifdef SM501_OHCI_DRIVER
+	retval = platform_driver_register(&SM501_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_sm501;
+#endif
+
 	return retval;
 
 	/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
 #ifdef SSB_OHCI_DRIVER
  error_ssb:
 #endif
@@ -1159,6 +1169,9 @@ module_init(ohci_hcd_mod_init);
 
 static void __exit ohci_hcd_mod_exit(void)
 {
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
 #ifdef SSB_OHCI_DRIVER
 	ssb_driver_unregister(&SSB_OHCI_DRIVER);
 #endif

drivers/usb/host/ohci-q.c

@@ -952,6 +952,7 @@ finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 			struct urb	*urb;
 			urb_priv_t	*urb_priv;
 			__hc32		savebits;
+			u32		tdINFO;
 
 			td = list_entry (entry, struct td, td_list);
 			urb = td->urb;
@@ -966,6 +967,17 @@ finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 			savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
 			*prev = td->hwNextTD | savebits;
 
+			/* If this was unlinked, the TD may not have been
+			 * retired ... so manually save the data toggle.
+			 * The controller ignores the value we save for
+			 * control and ISO endpoints.
+			 */
+			tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+			if ((tdINFO & TD_T) == TD_T_DATA0)
+				ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+			else if ((tdINFO & TD_T) == TD_T_DATA1)
+				ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
 			/* HC may have partly processed this TD */
 			td_done (ohci, urb, td);
 			urb_priv->td_cnt++;

drivers/usb/misc/sisusbvga/sisusb.c

@@ -3264,8 +3264,6 @@ static void sisusb_disconnect(struct usb_interface *intf)
 
 	/* decrement our usage count */
 	kref_put(&sisusb->kref, sisusb_delete);
-
-	dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
 }
 
 static struct usb_device_id sisusb_table [] = {

drivers/usb/serial/ftdi_sio.c

@@ -637,6 +637,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -828,6 +828,9 @@
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
 
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */

drivers/usb/serial/ipaq.c

@@ -570,7 +570,12 @@ static struct usb_serial_driver ipaq_device = {
 	.description =		"PocketPC PDA",
 	.usb_driver = 		&ipaq_driver,
 	.id_table =		ipaq_id_table,
-	.num_ports =		2,
+	/*
+	 * some devices have an extra endpoint, which
+	 * must be ignored as it would make the core
+	 * create a second port which oopses when used
+	 */
+	.num_ports =		1,
 	.open =			ipaq_open,
 	.close =		ipaq_close,
 	.attach =		ipaq_startup,

drivers/usb/serial/option.c

@@ -306,6 +306,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },

drivers/usb/serial/pl2303.c

@@ -57,6 +57,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },

drivers/usb/serial/pl2303.h

@@ -15,6 +15,7 @@
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 #define PL2303_PRODUCT_ID_ALDIGA	0x0611
 #define PL2303_PRODUCT_ID_MMX		0x0612
+#define PL2303_PRODUCT_ID_GPRS		0x0609
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547

drivers/usb/storage/unusual_devs.h

@@ -402,11 +402,19 @@ UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		US_FL_IGNORE_RESIDUE ),
 
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+/* CY7C68300 : support atacb */
 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress AT2LP",
 		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
 		0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+		0),
 #endif
 
 /* Reported by Simon Levitt <simon@whattf.com>