getconf

Simple config management for your Go application.

What is GetConf?

The main goal of GetConf is to provide an easy to use configuration manager that is able to load from environment, command line and/or a remote backend .

It works nice with 12-Factor apps. What can be done?:

load config at startup
set defaults
read from environment variables
read from command line flags
read from remote config systems
monitor remote config systems for changes (only Consul is supported right now)

As it is intended to work mainly in 12-Factor apps, it does not support configuration files at this time. This could be added if really needed.

Installation

go get -u github.com/jllopis/getconf

We recommend using go mod to manage dependencies. GetConf works with it and simplify dependency management. It is recommended to use >=go1.12 in this case.

getconf itself has few direct dependencies:

github.com/hashicorp/consul
github.com/spf13/cast
github.com/stretchr/testify (to run the tests)

How to work with it

To start using getconf is really simple:

Include the package github.com/jllopis/getconf in your go file
Create a struct to hold the variables. This struct will not be filled with values, it is just a convenient method to define them. Note that both the struct and the fields must be exported (uppercase)
Call getconf.Load( LoaderOptions ) where LoaderOptions is a struct to provide some data to GetConf:
- ConfigStruct interface{} will carry the defined config struct. This is mandatory
- SetName string is the name for the Options Set used in a remote config server
- EnvPrefix string sets the prefix prepended to the variable names in the environment (to prevent collisions)
- KeyDelim string sets the delimiter string to allow for embedded configuration structs
Now, the environment and flags are parsed for any of the config variables values
Use the variables through the Get methods provided
It will cast to the required type by the Get method so you can request a GetString(string) variable that is defined as int. Just be sure they are convertible

Additionally, you can check for values in a remote consul store. To use the KV backend, you should call EnableKVStore(*getconf.KVOptions) on getconf:

conf.EnableKVStore(&getconf.KVOptions{
	Backend: "consul",
	URLs:    []string{"127.0.0.1:8500"},
	KVConfig: &getconf.Config{
		ConnectionTimeout: 10 * time.Second,
		PersistConnection: true,
		Prefix:            "/settings/apps",
		Bucket:            "test",
	},
})

The KVConfig struct holds the configuration options specific to the backend. Supported options:

ConnectionTimeout: limits how long a Watch will block
PersistConnection: not used
Prefix: the path before the setName. Allows group of configs
Bucket: the path after the setName. Allows versioning of the app config

Trivial use case

The simplest use case will be to define the configuration struct and get the values from enviroment and/or flags. Just to calls are needed:

package main

import (
	"fmt"

	"github.com/jllopis/getconf"
)

type Config struct {
	Host     string `getconf:", default: etcd, info: this is the hostname"`   // just use the lowercase var name
	Port     int    `getconf:"default-port, info: service port"`   // rename the variable and add some info about it
	Debug    bool   `getconf:"debug, default: false, info: enable debug logging"`   // add a default
	IgnoreMe string `getconf:"-"`   // ignore this variable
}

func main() {
	fmt.Println("Starting test app...")

	// Load and set the variables defined in Config struct
	getconf.Load(&getconf.LoaderOptions{
		ConfigStruct: &Config{},
	})

	// just use the value
	fmt.Printf("Host=%s (%T)\n", getconf.GetString("host"), getconf.GetString("host"))

	// use it as the type defined...
	fmt.Printf("default-port=%d (%T)\n", getconf.GetInt("default-port"), getconf.GetInt("default-port"))
	// ...or get the type you need...
	fmt.Printf("default-port as string = %s (%T)\n", getconf.GetString("default-port"), getconf.GetString("default-port"))

	// ...for every supported type
	fmt.Printf("Debug = %t (Type: %T)\n", getconf.GetBool("debug"), getconf.GetBool("debug"))
	fmt.Printf("bool as string = %s (%T) ... and as int = %d (%T)\n", getconf.GetString("debug"), getconf.GetString("debug"), getconf.GetInt("debug"), getconf.GetInt("debug"))

	// just print the options that have taken some value
	fmt.Println("ALL OPTIONS SET:")
	o := getconf.GetAll()
	for k, v := range o {
		fmt.Printf("\tKey: %s (%T)- Value: %v\n", k, v, v)
	}

	// or the full getconf
	fmt.Printf("\nThe options as we know'em:\n%s\n", getconf.String())

	fmt.Println("Quitting test app")
}

Lets run it an see what happens...

ᐅ GCV2_DEFAULT_PORT=1112 go run littltest.go
Starting test app...
Host=etcd (string)
default-port=1112 (int)
default-port as string = 1112 (string)
Debug = false (Type: bool)
bool as string = false (string) ... and as int = 0 (int)
ALL OPTIONS SET:
	Key: debug (bool)- Value: false
	Key: host (string)- Value: etcd
	Key: default-port (int)- Value: 1112

The options as we know'em:
CONFIG OPTIONS:
	Key: default-port, Default: , Value: 1112, Type: int, LastSetBy: env, UpdatedAt: 2019-04-11 18:37:21.417653 +0000 UTC
	Key: debug, Default: false, Value: false, Type: bool, LastSetBy: default, UpdatedAt: 2019-04-11 18:37:21.417638 +0000 UTC
	Key: host, Default: etcd, Value: etcd, Type: string, LastSetBy: default, UpdatedAt: 2019-04-11 18:37:21.417632 +0000 UTC


Quitting test app

Nested variables

Sometimes could be, in long configs, useful to define the config struct with support for nested variables. That way will be easy to manage.

The use is the same as the simple case but, nested structures have some specificities:

the variable name in the config struct can be any valid name and can include chars, numbers or hyphen
when the variables are loaded from the environment, use '__' as separator between father and child. All chars must be uppercase
when the variables are loaded from the flags, use also '__' as separator but use the same case as it is defined in the struct
when accessing a variable you must use their name. With nested variables you must use the separator defines (defaults to '::')

So lets see the same example as before but adding some nested variables.

package main

import (
	"fmt"

	"github.com/jllopis/getconf"
)

type Config struct {
	Server struct {
		Host string `getconf:", default: https://localhost, info: this is the hostname"`
		Port int    `getconf:"default-port, info: service port"`
	}
	Debug    bool   `getconf:"debug, default: false, info: enable debug logging"`
	IgnoreMe string `getconf:"-"`
}

func main() {
	fmt.Println("Starting test app...")

	// Load and set the variables defined in Config struct
	getconf.Load(&getconf.LoaderOptions{
		ConfigStruct: &Config{},
	})

	fmt.Printf("Host=%s (%T)\n", getconf.GetString("server::host"), getconf.GetString("server::host"))

	fmt.Printf("default-port=%d (%T)\n", getconf.GetInt("server::default-port"), getconf.GetInt("server::default-port"))

	// see what we have..
	fmt.Printf("\nThe options as we know'em:\n%s\n", getconf.String())

	fmt.Println("Quitting test app")
}

And here it is:

ᐅ GCV2_SERVER__DEFAULT_PORT=8484 go run littltest.go
Starting test app...
Host=https://localhost (string)
default-port=8484 (int)

The options as we know'em:
CONFIG OPTIONS:
	Key: debug, Default: false, Value: false, Type: bool, LastSetBy: default, UpdatedAt: 2019-04-11 18:57:52.718259 +0000 UTC
	Key: server::host, Default: https://localhost, Value: https://localhost, Type: string, LastSetBy: default, UpdatedAt: 2019-04-11 18:57:52.71824 +0000 UTC
	Key: server::default-port, Default: , Value: 8484, Type: int, LastSetBy: env, UpdatedAt: 2019-04-11 18:57:52.718282 +0000 UTC


Quitting test app

Read from Consul

So we will create a connection to a consul backend. Then we will request a variable again. We have set the variable debug to true in Consul:

package main

import (
	"fmt"
	"log"
	"time"

	"github.com/jllopis/getconf"
	"github.com/jllopis/getconf/backend"
)

type Config struct {
	Server struct {
		Host string `getconf:", default: localhost, info: this is the hostname"`
		Port int    `getconf:"default-port, default: 8500, info: service port"`
	}
	Debug    bool   `getconf:"debug, default: false, info: enable debug logging"`
	IgnoreMe string `getconf:"-"`
}

func main() {
	fmt.Println("Starting test app...")

	// Load and set the variables defined in Config struct
	getconf.Load(&getconf.LoaderOptions{
		ConfigStruct: &Config{},
	})

	// see what value Debug have..
	fmt.Printf("[Pre Consul] Debug = %t (Type: %T)\n", getconf.GetBool("debug"), getconf.GetBool("debug"))

	fmt.Println("Enabling consul...")
	if err := getconf.EnableKVStore(&getconf.KVOptions{
		Backend: "consul",
		URLs:    []string{getconf.GetString("server::host") + ":" + getconf.GetString("server::default-port")},
		// URLs: []string{"localhost:8500"},
		KVConfig: &backend.Config{
			ConnectionTimeout: 10 * time.Second,
			Prefix:            "/settings/apps",
			PersistConnection: true,
			Bucket:            "v1",
		},
	}); err != nil {
		log.Panicf("cannot get bind to kv store. getconf error: %v\n", err)
	}

	// and after binding to consul...
	fmt.Printf("[Post Consul] Debug = %t (Type: %T)\n", getconf.GetBool("debug"), getconf.GetBool("debug"))

	fmt.Println("Quitting test app")
}

Let's see what happened...


ᐅ GCV2_SERVER__DEFAULT_PORT=8500 go run littltest.go
Starting test app...
[Pre Consul] Debug = false (Type: bool)
Enabling consul...
[Post Consul] Debug = true (Type: bool)
Quitting test app

Whatch a variable in config server

The separator for nested values in Consul is translated to '/', so you have to do it for setting the key.

package main

import (
	"context"
	"fmt"
	"log"
	"time"

	"github.com/jllopis/getconf"
	"github.com/jllopis/getconf/backend"
)

type Config struct {
	Server struct {
		Host string `getconf:", default: localhost, info: this is the hostname"`
		Port int    `getconf:"default-port, info: service port"`
	}
	Debug    bool   `getconf:"debug, default: false, info: enable debug logging"`
	IgnoreMe string `getconf:"-"`
}

func main() {
	fmt.Println("Starting test app...")

	// Load and set the variables defined in Config struct
	getconf.Load(&getconf.LoaderOptions{
		ConfigStruct: &Config{},
	})

	fmt.Println("Enabling consul...")
	if err := getconf.EnableKVStore(&getconf.KVOptions{
		Backend: "consul",
		URLs:    []string{getconf.GetString("server::host") + ":" + getconf.GetString("server::default-port")},
		// URLs: []string{"localhost:8500"},
		KVConfig: &backend.Config{
			ConnectionTimeout: 10 * time.Second,
			Prefix:            "/settings/apps",
			PersistConnection: true,
			Bucket:            "v1",
		},
	}); err != nil {
		log.Panicf("cannot get bind to kv store. getconf error: %v\n", err)
	}

	// and after binding to consul...
	fmt.Printf("[Port value] server::default-port = %d (Type: %T)\n", getconf.GetInt("default-port"), getconf.GetInt("default-port"))

	key := "server::default-port"
	fmt.Printf("Monitoring key '%s'\n", key)
	ctx, cancel := context.WithCancel(context.Background())
	err := getconf.WatchWithFunc(ctx, key, func(s []byte) {
		fmt.Printf("%s value changed on store: %s (%T)\n", key, s, s)
	})
	if err != nil {
		fmt.Printf("Error trying to watch value at key: %v\tError: %s\n", key, err.Error())
	}
	time.Sleep(10 * time.Second)
	cancel()

	fmt.Println("Quitting test app")
}

And call it by

ᐅ GCV2_SERVER__DEFAULT_PORT=8500 go run littltest.go
Starting test app...
Enabling consul...
[Port value] server::default-port = 0 (Type: int)
Monitoring key 'server::default-port'

Now, go to your Consul admin page and change the value for server::default-port. You will see something like:


server::default-port value changed on store: 80 ([]uint8)
Quitting test app
Closed watch on /settings/apps/gcv2/v1/server/default-port

Nice. The monitorin function getconf.WatchWithFunc take a func as param that will be executed when the monitored variable changes value. This func has the signature func(s []byte) where s is the string value got from the store.

We can also see that a context is provided in the first param. This allows to cancel the function anytime (in the sample we had a fixed timer of 10s).

Watch changes in a tree

If you need to monitor a variable that still do not exists in remote config server or want to be notified about changes in more than one variable, you can use WatchTreeFunc than will monitor the variables below the tree specified and will execute the function provided. The function will get the variable that has been updated: f func(*backend.KVPair).

Lets see an example:

package main

import (
	"context"
	"fmt"
	"log"
	"time"

	"github.com/jllopis/getconf"
	"github.com/jllopis/getconf/backend"
)

type Config struct {
	Server struct {
		Host string `getconf:", default: localhost, info: this is the hostname"`
		Port int    `getconf:"default-port, info: service port"`
	}
	Debug    bool    `getconf:"debug, default: false, info: enable debug logging"`
	FloatVar float32 `getconf:"fvar, info: a float32 variable"`
	IgnoreMe string  `getconf:"-"`
}

func main() {
	fmt.Println("Starting test app...")

	// Load and set the variables defined in Config struct
	getconf.Load(&getconf.LoaderOptions{
		ConfigStruct: &Config{},
		KeyDelim:     ".",
	})

	fmt.Printf("prior to watch tree, variable is not set in getconf: fvar=%f\n", getconf.GetFloat32("fvar"))

	fmt.Println("Enabling consul...")
	if err := getconf.EnableKVStore(&getconf.KVOptions{
		Backend: "consul",
		URLs:    []string{getconf.GetString("server.host") + ":" + getconf.GetString("server.default-port")},
		// URLs: []string{"localhost:8500"},
		KVConfig: &backend.Config{
			ConnectionTimeout: 10 * time.Second,
			Prefix:            "/settings/apps",
			PersistConnection: true,
			Bucket:            "v1",
		},
	}); err != nil {
		log.Panicf("cannot get bind to kv store. getconf error: %v\n", err)
	}

	// and after binding to consul...
	fmt.Printf("[Port value] server.default-port = %d (Type: %T)\n", getconf.GetInt("default-port"), getconf.GetInt("default-port"))

	path := "/settings/apps/gcv2/v1"
	fmt.Printf("Monitoring tree %s\n", path)
	ctx, cancel := context.WithCancel(context.Background())
	getconf.SetWatchTimeDuration(1 * time.Second)
	err := getconf.WatchTreeWithFunc(ctx, path, func(kv *backend.KVPair) {
		fmt.Printf("GOT NEW VALUE: %s = %s\n", kv.Key, kv.Value)
	})
	if err != nil {
		fmt.Printf("Error trying to watch tree at: %v\tError: %s\n", path, err.Error())
	}
	time.Sleep(10 * time.Second)
	cancel()

	fmt.Printf("the variable is now correctly set in getconf: fvar=%f\n", getconf.GetFloat32("fvar"))

	fmt.Println("Quitting test app")
}

ᐅ GCV2_SERVER__DEFAULT_PORT=8500 go run littltest.go
Starting test app...
prior to watch tree, variable is not set in getconf: fvar=0.000000
Enabling consul...
[Port value] server.default-port = 0 (Type: int)
Monitoring tree /settings/apps/gcv2/v1
GOT NEW VALUE: settings/apps/gcv2/v1/debug = true
GOT NEW VALUE: settings/apps/gcv2/v1/server/default-port = 8000
GOT NEW VALUE: settings/apps/gcv2/v1/server/host = http://www.acb.com

Now, go to consul and create settings/apps/gcv2/v1/fvar. You will see the created variable is notified and then set in GetConf:

GOT NEW VALUE: settings/apps/gcv2/v1/debug = true
GOT NEW VALUE: settings/apps/gcv2/v1/fvar = 3.1415926535897932384626433832795028841971693993751058209749445923078164062862
GOT NEW VALUE: settings/apps/gcv2/v1/server/default-port = 8000
GOT NEW VALUE: settings/apps/gcv2/v1/server/host = http://www.acb.com
the variable is now correctly set in getconf: fvar=3.141593
Quitting test app

The WatchTreeFunc will return all variables within the tree when a change occur. This could change in the future notifying only the key that has changed.

How it works

The options can be defined in:

default values from the struct definition
environment
command line flags
remote key/val store

The order is the specified, meaning that the last option will win (if you set an environment variable it can be ovewritten by a command line flag). The last value read will be from the kv store.

To be parsed, you must define a struct in your program that will define the name and the type of the variables. The struct members must be uppercase (exported) otherwise reflection will not work.

The struct can be any length and supported types are:

int, int8, int16, int32, int64
uint, uint8, uint16, uint32, uint64
float32, float64
string
bool
time.Time

The type time.Time supports different layouts (see godoc), like:

RFC3339Nano (_2017-10-24T22:11:12+00:00_or 2017-10-24T22:21:23.159239900+00:00)
Epoch in seconds since January 1, 1970 UTC (1508922049)
2017-10-24T22:31:34
2017-10-24 22:31:34
2017-10-24

Any other type will be discarded. A time.Time layout different that the ones supported (i.e. epoch in miliseconds) will produce an invalid result.

If a value can not be matched to the variable type, it will be discarded and the variable set to nil.

The use of nested structures is allow but have some rules:

the variable name in the config struct can be any valid name and can include chars, numbers or hyphen
when the variables are loaded from the environment, use '__' as separator between father and child. All chars must be uppercase. Ex: GCV2_PARENT__VAR -> parent::var
when the variables are loaded from the flags, use also '__' as separator but use the same case as it is defined in the struct. --parent__var -> parent::var
when accessing a variable you must use their name. With nested variables you must use the separator defines (defaults to '::'). Ex: GetString("parent::var")

struct tags

There are some tags that can be used:

-: If a dash is found the variable will not be observed. Should be the only element in the tag
default: Specifies the default value for the variable if none found
info: Help information about the intended use of the variable

The tags are separated by comma. It holds a key: value pair for every setting (key before a colon, value after it). Ex: default: defaultValue, info: an example. Because colon is used as a separater, a value can not contain a colon in it.

The exception to the rule that is the first field that is the name of the variable. This name must be used to acces it later. If no name is assigned the tag must still start with a colon.

If a key only field comes after first position, it will be ignored.

environment

The variables must have a prefix provided by the user (defaults to GCV2). This is useful to prevent collisions. So you can set

GCV2_VAR1="a value"

and at the same time

YZ_VAR1=233

being prefixes "GCV2" and "YZ".

The variable name will be set from the struct name or from the first field of the tag if it exists. It will be UPPERCASED so when you define the env vars must take this into consideration. Lower and Mixed case environment variables will not be taken into account.

Nested variables shoud use __ as separator.

command line flags

Command line flags are standard variables from the go flag package. As before, the variable name will be set from the struct name or from the first field of the tag if it exists.

In command line, a boolean flag acts as a switch, that is, it will take the value of true if present and false otherwise. You can force a boolean flag to false.

remote kv store

In order to use the kv store, we need to use two structs to pass the configuration options. The first one is for getconf itself and inform about the backend to be user, the server URLs and the configuration needed to operate.

type KVOptions struct {
	Backend  string
	URLs     []string
	KVConfig *Config
}

The Backends supported by GetConf now:

Consul versions >= 0.5.1

The second struct is meant to be passed to the backend.

type Config struct {
	ClientTLS         *ClientTLSConfig
	TLS               *tls.Config
	ConnectionTimeout time.Duration
	Bucket            string
	PersistConnection bool
}

type ClientTLSConfig struct {
	CertFile   string
	KeyFile    string
	CACertFile string
}

Roadmap

Read variables from flags in command line
Read variables from environment
Implement remote config service
Add documentation
Suppot all go basic types plus time.Time
Support for nested options
Suport for auto cast on Get
Add test cases

Name		Name	Last commit message	Last commit date
Latest commit History 107 Commits
backend		backend
.gitignore		.gitignore
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
docker-compose.yml		docker-compose.yml
environment.go		environment.go
getconf.go		getconf.go
getconf_test.go		getconf_test.go
go.mod		go.mod
go.sum		go.sum
kvstore.go		kvstore.go
tags.go		tags.go
typeconv.go		typeconv.go
version.go		version.go

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

getconf

What is GetConf?

Installation

How to work with it

Trivial use case

Nested variables

Read from Consul

Whatch a variable in config server

Watch changes in a tree

How it works

struct tags

environment

command line flags

remote kv store

Roadmap

Similar projects

About

Releases

Packages

Languages

License

jllopis/getconf

Folders and files

Latest commit

History

Repository files navigation

getconf

What is GetConf?

Installation

How to work with it

Trivial use case

Nested variables

Read from Consul

Whatch a variable in config server

Watch changes in a tree

How it works

struct tags

environment

command line flags

remote kv store

Roadmap

Similar projects

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages