Arduino + CC1101 + CCMANAGER #8

Activity

1. jglim commented on Dec 21, 2017

   

   jglim

   on Dec 21, 2017

   Owner

   More actions

   Hello,

   If you have an Arduino Pro Micro 3.3V, the sketch here should work (Not tested on other Arduino models):

   https://github.com/jglim/CCManager/blob/master/firmware/cc1101-promicro-passthrough.c

   The connection should be as follows:

   VCC  - VCC
   GND  - GND
   CSN  - 10
   MOSI - 11
   MISO - 12
   SCK  - 13
   

   Again, remember that this is only for 3.3V boards. Using a 5V board will most likely break your CC1101 module.