Skip to content

Releases: jens-maus/RaspberryMatic

RaspberryMatic 3.81.5.20250326

26 Mar 12:55
@github-actions github-actions
3.81.5.20250326
cf00d23
Compare
Choose a tag to compare
RaspberryMatic 3.81.5.20250326 Latest
Latest

This is release 3.81.5.20250326 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • ac6447e1e - updated OCCU version to 3.81.5-1 integrating full compatibility to the CCU3 3.81.5 firmware which comes with the following changes:
    • With HmIP-WTH* wall thermostats, the previous mode was not always restored after a battery change.
    • HmIP-SRH - the value set for the “Event delay” configuration parameter was not displayed correctly.
    • HmIP-LSC - Channel 1 in the channel selection for channels and favorites was not offered.
    • It was not possible to edit a link between some devices.
    • HmIP-eTRV-3 - Extension of the channel parameters.
    • HmIP(W)-SMO230(-A) - The “Sensitivity” configuration parameter has been added.
    • HmIP-CTV - The value range of the angle for position detection has been extended for the HmIP-CTV from 10° - 45° to 0° - 180°.
    • HmIP-TACO -The value range of the angle for position detection has been extended from 10° - 45° to 0° - 180°.
    • HmIP-TACO - Config parameter Hysteresis renamed.
    • With HmIP-WTH*, errors during adaptation travel are now also displayed as a service message. The change is only effective for newly learned devices.
    • HmIP-DRG-DALI - Setting range of the “Display contrast” config. parameter extended.
    • ELV-SH-CTV - “Tilt change” channel parameter added.
    • HmIP-eTRV-F - Extension of the channel parameters
    • ELV-SH-CTH - The long name in the WebUI has been changed.
    • HmIP-ESI-GAS - The displayed gas flow rate has been extended from 2 to 3 decimal places.
  • 4634ca176 - update generic_raw_uart to latest official version compatible to kernel 6.12.x. In addition, applied the corresponding changes/patches to our eq3_char_loop buildroot package as well.

WebUI changes:

  • 015f346bf - add missing ROTARY_HANDLE_TRANSCEIVER patches for SHORT_ON_MIN_LEVEL profile parameters in 0188-WebUI-Fix-MissingEasymodeSHORT_ON_MIN_LEVEL WebUI patchset to fix direct connections with a HmIP-SRH/HmIP-FDT (#3061).

Operating system changes:

  • f89c04c7f - bump upstream kernel to 6.12.20
  • 249f3ce8f - bump buildroot to 2025.02 and adapt platform configs accordingly.
  • 9d060029f - use QUIT psplash-write command rather than kill to gracefully quit psplash upon finishing rcS.
  • 18552d879 - bump rpi-eeprom to pieeprom-2025-03-10.bin (rpi5)
  • 6419d2f24 - add actions/attest-build-provenance to release workflow to attest artifact and container provenance to be able to check validity of released container images.
  • b468510e7 - bump tailscale from 1.80.2 to 1.80.3 (#3053)
  • d4450a14a - fix CT storage selection by using '-content rootdir' option when searching for compatible CT storages.
  • 85456a00f - make sure to output potential reasons why no RaspberryMatic container was found (e.g. the users uses a VM instead!)
  • e0e0699aa - bump qemu-guest-agent to 9.2.2
  • a166c8dfb - remove nodejs v20 downgrade patch because the latest buildroot 2024.11.2 and 2025.02 fixes the nodejs v22 compile issues.
  • 0ab4ee883 - update rpi-firmware to latest 1.20250305
  • 206d1d102 - Remove USB stack patches working around obsoleted Z-Wave devices issues as is is not required anymore and conflicts with current 6.12.x kernel versions.

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus
Assets 42
0 Join discussion

RaspberryMatic 3.79.6.20250220

20 Feb 10:36
@github-actions github-actions
3.79.6.20250220
2f40831
Compare
Choose a tag to compare
RaspberryMatic 3.79.6.20250220

This is release 3.79.6.20250220 of RaspberryMatic which is a bugfix release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • 48f812c9d - updated OCCU version to 3.79.6-13 which comes with the following changes:
    • update ReGaHss logic engine to version R1.00.0388.0251 (Feb 12 2025):
      • fix issue with SIGPIPE signals stopping ReGaHss unexpected. Now SIGPIPE signals are ignored and properly handled at each individual situation.
      • minor process signal refactoring returning error messages in case a signal action/handler cannot be assigned.
      • fix minor compiler warnings when compiled with -pedantic
      • fix system.Exec() creating zombie processes due to stdout/stderr or syslog outputs between fork() and execl() use resulting in unreliable event delivery once such exec zombie was generated.
      • replace UINT/ULONG datatypes with appropriate uintXX datatypes to match the general uses.
      • use int64_t instead of DWORD for all kind of timeout values in the internal event scheduler. This should help fixing issues with potential timeout overflows.
      • fix CLOEXEC file descriptor closing before execl() by using a dirwalk over /proc/self/fd rather than using getrlimit() which resulted in a severe performance penalty under certain situations (e.g. in a containerized environment).
  • 2544009c8 - implement an explicit ReGaHss debug log startup mode in S70ReGaHss which will perform excessive debug output logging to logfiles in /usr/local/tmp in case the file /etc/config/ReGaHssVersion contains DEBUG. This will then use the "script" tool to output all stdout/stderr messages to a dedicated and prolonged log file instead of logging to syslog. This should help in case of required ReGaHss debugging.
  • 25bcf78ad - add some minor rfd.conf cleanup routine to S61rfd which will remove double newlines that can occur over time when adding/removing LAN gateways.
  • 5fc158ddf - rework S58LGWFirmwareUpdate and S59SetLGWKey to check if execution is required or not (in case a BidCos LAN Gateway is defined or not) and only execute time critical commands in case a LAN Gateway was found.
  • 43e8a0276 - sync main HA addon config with the dev version.

WebUI changes:

  • 798a3c681 - fix 0193-WebUI-EnhancedTRVSettingsPage WebUI patch which was hindering that the device settings page could be displayed for HmIP-eTRV-C. (cf. https://github.com/jens-maus/RaspberryMatic/discussions/2985, @Baxxy13)
  • ea9efde50 - fix 0143-WebUI-Fix-Translation wind direction abbreviation routines to only use ${} in case of a wind direction device.
  • 6264dd723 - add dedicated wind direction abbreviation translations so that e.g. in the english WebUI interface "South East" is correctly abbreviated as SE and not SO (#3009).
  • fa37e7adc - check for -----BEGIN instead of search for end of a string when checking for a valid SSL certificate file being uploaded (#2998).

Operating system changes:

  • d54085158 - update qemu guest agent to 9.2.1
  • 8d9b75937 - update wiringpi-odroid to 3.17.0
  • f176a7c7c - update wiringpi version to 3.14 for rpi target.
  • cc45a99de - update upstream kernel to 6.12.14
  • ebb157ea5 - change POKY_IMG_RLE_PIXEL_DATA to use uint8_t datatype in psplash.
  • 40b52e051 - add zlib gzguts timebits fix patch to fix issues when compiling nodejs v20 with TIME_BITS=64 enabled.
  • 87a30bb20 - globally roll out BR2_TIME_BITS_64 config options for all 32bit targets so that packages will be compiled with _TIME_BITS=64 for improved Y2038 compatibility.
  • 78c03e8e3 - bump tailscale to 1.80.0
  • 36e974656 - bump rpi-firmware to 1.20250127
  • 19ba7ed80 - bump rpi-linux kernel to stable_20250127 (6.6.74).
  • e110d76b9 - unify internet connectivity checking by using /bin/checkInternet in /bin/dhcp.script rather than doing these tests slightly different (#3018).
  • 07d3ef5cc - use timeout to limit each internet check step so that upon a blocking network connection the bootup can not stall (#3018).
  • b91253414 - add Monit 2812/tcp port to config.yaml to allow to configure it for external use via the HA-Addon (#3014).
  • 28f3d83d7 - use actions/attest-build-provenance to attest build provenance for our container builds and artifact uploads.
  • 21c576e7d - use timeout for all eq3configcmd calls so that a LAN-Gateway setup/update during bootup won't result in a stalling boot (#3008).
  • 1df261a45 - revert U-Boot to 2023.01 for rpi4 target including the old patches we were using with the previous build (#2801).
  • 6c11bf825 - raise coredump limit
  • 874dd48b9 - set core_pattern and enable fatal-signals in sysctl.conf
  • 9513af9d9 - add missing RaspberryPi5 dtb files for different RPI5 versions to support.
  • 52d32332b - update rpi-eeprom to latest pieeprom-2025-02-12.bin (rpi5) and pieeprom-2025-02-11.bin (rpi4).
  • 006e71e4a - update java azul to latest 11.78.15-ca-jre11.0.26 for aarch64, x86_64 and i686.
  • 846176690 - update Mediola NEOserver to latest 2.17.1
  • 82f90f939 - disable some definitely not required filesystem types.
  • e6f359cc6 - use kmod xz compression and disable all kernel module support in busybox since we anyway have the kmod tools installed.
  • bef26ee0a - add kernel module compression/uncompression support (#2997).
  • 2a7b9f4d4 - enable firmware compression support for kernel 6.12.x
  • 2962e3a5a - enable linux firmware compression support to reduced used rootfs size and also remove unnecessary firmware files explicitly for generic-aarch...
Read more

Contributors

jens-maus and Baxxy13
Loading
1 Join discussion

RaspberryMatic 3.79.6.20250118

18 Jan 21:09
@github-actions github-actions
3.79.6.20250118
dac12ef
Compare
Choose a tag to compare
RaspberryMatic 3.79.6.20250118

This is release 3.79.6.20250118 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • bdb417c5b - updated OCCU version to 3.79.6-9 which comes with the following changes:
    • update ReGaHss logic engine to version R1.00.0388.0248 (Jan 9 2025):
      • fix operator= hierarchy issues resulting in e.g. favorites management being broken recently (cf. #2975).
      • fix default exec block timeout limit not being set correctly. Now a blocking system.Exec() call should be perfectly terminated after the default (10 seconds) of blocking.
      • implemented a system.Exec() child execution time monitoring where upon using blocking calls (catching stdout/stderr, no & at the command end) the blocking time duration is monitored and if the used command blocks more than 3 seconds a warning log output is produced with a repeated interval of 1 second. In addition, upon reaching a maximum blocking time (default 10000 ms) the exec child is forcefully killed so that the main process is not blocked for a too long time. Note, that the default maximum block time can be globally modified via a new system.MaxExecBlockTime() script command which takes the time limit in milliseconds. Furthermore, with every system.Exec() execution a user can explicitly override the default by specifying the time limit in milliseconds as the fifth command parameter. Last, not least if such an explicit time limit is specified for system.Exec() as the fifth parameter even non-blocking system.Exec() calls will forcefully kill its exec child so that this new monitor+kill functionality can now be used instead of potentially having to put a "timeout XX" statement before such system.Exec() executions which otherwise could take forever, thus blocking system resources for a too long time.
      • system.Exec() calls will now properly detach all file descriptors upon execl() execution so that upon a vanishing parent the children won't block any network ports or other file descriptors. This should make the exec calls more independent from the main ReGaHss process.
      • reworked system.Exec() to use setsid() to promote the generated exec childs as dedicated process group leaders with an own PGID group id. This makes it possible to kill the exec child based on its PGID to ensure all of its potential children are killed as well then.
      • fix /bin/hm_deldev execution to not block any parent file descriptors upon termination by setting all fds to CLOEXEC.
      • optimize rega startup procedure to make sure hm_startup execution won't block any parent process file descriptors by setting CLOEXEC on all fds upon execution of execl(). Furthermore signal catching now uses sigwait() instead of a suboptimal while/sleep combination.
      • fix operator= overload hierarchy to be GCC13 compatible and slightly reworked some operator= methods to not use pointers but references like the other operator= methods.
      • upon reaching the maximum parallel http connections we print warning and error messages rather than just info syslog messages so that users are informed way earlier that they are having too many parallel HTTP listeners or too many blocking http sessions.
      • rework ExecProcess() to use freopen() for stdout/stderr redirection to to better comply with common standards. In addition, standard logging output routines are used to output potential error output to syslog correctly.
  • 27c107722 - increase number of cycles from 5 to 20 for all homematic relevant service port restart jobs in the monit configuration. This should increase the max time from 65 seconds to 260 seconds before a service (e.g. ReGaHss) is forced restarted due to being assumed to be dead. This change should help large installations with lots of devices and functions/rooms to not exceed waiting limits and thus risk to get ReGaHss force restarted. (cf. #2975 (comment))
  • ac4bd0978 - fix file/dir exclude statements in createBackup.sh which resulted in tmp and lost+found being part of a backup, which should not have been the case.
  • c1af612e6 - bump default HttpListenerMaxConnections value in rega.conf to 24 so that busy systems can handle more parallel http requests in ReGaHss.
  • 2816d267c - add external port definitions for haus-bus.de device communication (5855/udp) and webui admin port (8911/tcp) (#2940).

WebUI changes:

  • ce3947eb7 - Add new 0196-WebUI-Fix-FilterOfTwoColumnControlPages WebUI patch which enhances the device, functions and room status display page to correctly synchronize the two columns if a filter is set/unset (#2973, #2974, @Weseler485)
  • 6071b81c9 - add new 0195-WebUI-Fix-MissingDimmerDefinition WebUI patch to fix missing channel (ch) variable definitions in certain easymode dimmer receiver files which resulted in undefined variable exceptions (#2961).
  • 1ad619812 - revise 0186-WebUI-Fix-HmIPW-DRI16_DRI32-Channel WebUI bugfix patch to address a regression with HmIP-MOD-RC8 requiring the original operating mode settings (#2736).
  • 50ab94875 - add fix to 0119-WebUI-Fix-ProofAndSetValue WebUI patch which ensures that for METER_CONSTANT_ENERGY (HmIP-ESI+ES-LED) the min/max value is not using a float value (#2937).

Operating system changes:

  • ff3ab66d8 - modify default dhcp client options in busybox config so that no "-R" option is used to release the IP address. Furthermore, the checkDHCP script has been synchronized to carry the same dhcp options.
  • f50d30d24 - turn wifi power saving mode off per default in case wifi is used. (cf. https://www.heise.de/select/ct/2025/2/2405112065799406298).
  • 8b99c1c20 - update rpi-eeprom to pieeprom-2024-12-07.bin (bcm2711) and pieeprom-2025-01-14.bin (bcm2712).
  • 72898fbca - update qemu guest agent to latest 9.2.0
  • a1ba9c462 - update buildroot to latest 2024.11.1
  • e48727f81 - bump upstream kernel from 6.6.x to 6.12.x for all platforms excluding all RaspberryPis where the upstream kernel is still based on kernel 6.6.x. This includes introduction of own 6.12.x kernel configs and two required upstream patches to bump strace to latest 6.12 version compatible with kernel 6.12. Furthermore, a new linux-tools-hyperv-fix upstream buildroot patch will fix the changed sources of the hyperv fbcopy tool compiled for the OVA platform builds.
  • cd7cf8e8e - update upstream kernel to 6.12.9
  • 121f6b60a - Add another kernel 6.11 compatibility patch for generic_raw_uart to define the raw_uart_driver##_remove() function with a void return to comply with kernel changes in 6.11.
  • d72fdc546 - Add all BCM2712 device trees to RPi 5 platform image so that other/newer rpi5 variants (compute module 5, etc.) will have proper device trees (cf. home-assistant/operating-system#3782)
  • c917d6e2f - fix chrony init startup filename to use "chronyd" so that with buildroot 2024.11 the buildroo's own init file is correctly removed again.
  • [0239cd1](http://github.com/jens-maus/R...
Read more

Contributors

jens-maus and Weseler485
Loading
0 Join discussion

RaspberryMatic 3.79.6.20241122

22 Nov 13:00
@github-actions github-actions
3.79.6.20241122
8afa4ed
Compare
Choose a tag to compare
RaspberryMatic 3.79.6.20241122

This is release 3.79.6.20241122 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • f7d2f5cfd - updated OCCU version to 3.79.6-6 which comes with the following changes:
    • update ReGaHss logic engine to version R1.00.0388.0245 (Nov 6 2024):
      • implement SortByName() sort order and sort type functionality. Now a user can specify soAsc or soDesc as a first parameter to specify the sort order and stAlpha or stNatural as a second parameter to specify the sort type (alphabetical vs. natural sorting) with the defaults soAsc and stAlpha.
      • fix issue where negative offset values for AstroDay/Night events did not work.
      • fix issue in .UserAccessRights() and .GetHistoryData() not converting their integer parameters correctly to 64bit integers.
  • e197f02d0 - add new clear_sysvars function to /bin/hm_startup to ensure the ID_GW_SYSALARM and ID_GW_SYSSERVICE system variables are set to zero upon ReGaHss startup.
  • 394d630f5 - add fix to /bin/hm_startup which will make sure that the standard "Alarmzone 1" OT_ALARMDP will be generated in the same way like OT_ALARMDP variables are generated in the WebUI or via triggerAlarm.tcl, thus ensuring that AlSetBinaryCondition() has been called to add the necessary binary condition. In addition, a new fix_alarmDPs() function in hm_startup will now make sure that existing ALARMDP variables will get the necessary binary condition as well. This should fix issues with the default "Alarmzone 1" variable which was always toggling its state.
  • 11776dd92 - added a new HomeAssistant Add-on called "RaspberryMatic CCU (Proxy)" to our HA Add-on repository. This HA add-on allows to reference an external RaspberryMatic system from within HA so that an ingress driven sidebar element can be added for being able to access the WebUI from that external CCU system directly within Home Assistant.
  • b5ca8fd5b - update Mediola NEOserver to 2.17.0

WebUI changes:

  • 0bb52cf41 - add new 0194-WebUI-Add-MissingChannelDescriptions WebUI patch to add missing channel descriptions (#2922, @jp112sdl)
  • 67828ca2e - add new 0193-WebUI-EnhancedTRVSettingsPage WebUI patch to unify all eTRV related device settings pages for better device parameter management (#2919, #2893, @Baxxy13)
  • 69c7b017f - add new 0192-WebUI-Fix-IncorrectTagClosure WebUI bugfix patch fixing certain tag closure typos (fixes #2913).
  • d871acec6 - retire 0189-WebUI-Fix-ControlHmIP-MOD-RC8 since OCCU 3.79.6-5 is about to fix the issue instead.
  • ea0381594 - add new 0191-WebUI-Add-NaturalSortOrderInControlTabs WebUI patch to use natural sorting in control tabs (#2897, #2904, @jp112sdl)
  • 2c5fa333a - add "soAsc", "soDesc", "stAlpha" and "stNatural" to CodeMirror syntax highlighting.
  • d2ddd461f - add new 0190-WebUI-Fix-AddMissingExtendedChannelDescriptions WebUI patch fixing missing channel descriptions (#2898, #2902, @jp112sdl)
  • 30a8ca957 - add new 0188-WebUI-Fix-MissingEasymodeSHORT_ON_MIN_LEVEL WebUI patch fixing issues (#2889, #2887, @jp112sdl)
  • 66b8cbbe4 - add new 0187-WebUI-Fix-GroupEditingIfDevicesInInbox WebUI patch fixing group editing if devices are in inbox (#2886, @jp112sdl)
  • 5626642a4 - add additional fix to 0119-WebUI-Fix-ProofAndSetValue WebUI patch to fix issues in getOptionBox tcl function to perform a correct floating point comparison via an epsilon difference (#2929).

Operating system changes:

  • 5075b8062 - update buildroot to latest 2024.08.2
  • 4a64ab266 - update upstream kernel to 6.6.62
  • c83bd4084 - update rpi-eeprom to latest pieeprom-2024-11-12.bin
  • 71bed2eb7 - use dwc2 dtoverlay for rpi0 target to get recovery system boot fixed.
  • 721bb0e4d - update tailscale to 1.76.6
  • 7517b0522 - don't use arm-linux-gnueabihf binaries for rpi0 platform (fixes #2888).
  • 05d78388d - Update install-proxmox.sh to add RaspberryMatic logo and link in Proxmox description (#2894, @ArnaudFeld)

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

ArnaudFeld, jens-maus, and 2 other contributors
Loading
0 Join discussion

RaspberryMatic 3.79.6.20241031

31 Oct 12:28
@github-actions github-actions
3.79.6.20241031
94e07bc
Compare
Choose a tag to compare
RaspberryMatic 3.79.6.20241031

This is release 3.79.6.20241031 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • 8f2c8f78f - updated OCCU version to 3.79.6-2 integrating full compatibility to the CCU3 3.79.6 firmware which comes with the following changes:
    • ⚠️ BREAKING CHANGE ⚠️: Due to changes in the HmIPServer service of the 3.79.x firmware, a downgrade to previous versions may result in lost HmIP devices. Users are therefore highly advised to create a sbk-file Backup previous to any update to 3.79.x in case a downgrade is required to previous versions so that this backup can be restored then.
    • update ReGaHss logic engine to version R1.00.0388.0243 (Oct 27 2024):
      • finally provide a 64bit native binary for all 64bit supported platforms (aarch64, x86_64) (c.f. #903).
      • enabled _TIME_BITS=64 and removed hard limit <= year 2037 in the internal date check so that time_t values can carry 64bit signed values, thus dealing with dates with year >= 2038. This fixes certain Y2038 limitations for 64bit and 32bit versions of ReGaHss, thus make it Y2038+ aware.
      • changed script engine to use a 64bit integer datatype per default, thus e.g. integer values >2^31 can be used now.
      • add fix to correctly convert to an ISE object ID for certain script functions. Now several script functions can either take the object ID or directly derive it from the supplied object itself.
      • removed individual thread stack size settings and rely on the default stack sizes of the underlying operating system instead. This fixes certain crash issues with too low stack sizes in case of deep nested loop recursions.
      • fix issue with .GetAt() indexing not working correctly with 64bit integers.
    • With some dimmer links, a value entered as a percentage was displayed too small by a factor of 100 in expert mode.
    • HmIP-SWO (weather sensor) - The description for calculating the brightness threshold of the corresponding configuration parameter has been adjusted. Previously, the brightness threshold was set too low by the customer by a factor of 10.
    • HmIP-RGBW - When linking to a button, the value “S” (Saturation) was not applied to the color selection picker.
    • When using a system variable in %, this was output too small by a factor of 100.
    • HmIP-STV (tilt/vibration sensor) - The possible values for the configuration parameters angle and hysteresis for position detection and tilt detection have been adjusted.
    • The Easymode for devices of channel type COND_SWITCH_TRANSMITTER_TEMPERATURE, e.g. HmIP-STE-2-PCB, has been extended by 2 additional subsets:
      • Upper temperature threshold exceeded on / lower threshold undershot off
      • Upper temperature threshold exceeded off / lower threshold undershot on
    • The “Hours” option has been removed from the “Event delay” channel parameter
    • Easymodes for dimming actuators have been expanded to include the 'Minimum level in “on” state' parameter. This allows LED lamps to be switched on at lower values.
    • Thermostats now have the option of choosing between heating and cooling under Status/Operation.
    • Easymode added for linking the presence detector HmIP-SPI with HmIP-RGBW, HmIP-LSS and HmIP-DRG-DALI.
    • You can now filter by device under Status and operation.
  • b676b5736 - fix SYSTEM_HAS_USER_KEY usage/setup in restore_backup.cgi script of recovery system.
  • 5d3345f53 - complete rework of restoreBackup.sh to not apply a supplied sbk backup right away but schedule it for the next boot cycle instead like a normal webui based backup restore is doing this. In addition, the new version now allows to perform certain consistency checks of a sbk backup and outputs this information on the command-line in addition to allowing to check if a supplied security key matches the backup and/or already installed system key.
  • b9479dd00 - enable firewall error logging per default and output as user.err instead.

WebUI changes:

  • d5df55afb - Fix umlauts in translate.lang.js of 0136-WebUI-Add-Tailscale-VPN WebUI patch (#2883, #2884, @boppbo)
  • b86c8b2bf - add another style glitch patch which brings back the more dense device list presentation in the device status display in OCCU 3.79.x.
  • b100e2c44 - remove of the 0024-WebUI-Filter-Operations WebUI patch which has been integrated by eQ3 in OCCU 3.79.4.
  • 2a18bc977 - update CodeMirror script editor to latest 5.65.18 version.

Operating system changes:

  • beaed5276 - update rpi-eeprom to latest pieeprom-2024-10-21.bin
  • a7713a477 - add noexec,nosuid,nodev mount options to certain tmpfs mounts to ensure they are more safe to being misused. Also changed inittab to not directly mount but respect fstab settings/options.
  • 655b9f697 - update upstream kernel to 6.6.58
  • 2520ae049 - bump qemu-guest-agent to 9.1.1
  • 056307e76 - update tailscale to latest v1.76.1 (#2882, @fl0x53).
  • fa328755b - ensure that /etc/init.d/S50crond is removed in post-build.sh because we do have our own crond startup script in S98 (#2858).
  • 30d9efe11 - update buildroot to latest 2024.08.1
  • 4f71d8b7b - updated java azul to latest 11.76.21-ca-jre11.0.25
  • 3ef3eb07e - set init_on_free=0 as default cmdline kernel option for generic-x86_64 to get certain newer NUC systems to boot correctly again when doing a UEFI boot (#2834).
  • d3d203baf - update rpi linux kernel to latest version (stable_20241008 / 6.6.51)
  • 720613ae6 - update rpi-firmware to latest version (1.20241008)
  • 1a6b257ad - add missing LIMIT and HF netfilter kernel extensions for improved ipv6 firewall support (#2874).

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

boppbo, jens-maus, and fl0x53
Loading
8 Join discussion

RaspberryMatic 3.77.7.20240826

26 Aug 12:08
@github-actions github-actions
3.77.7.20240826
33b7f2a
Compare
Choose a tag to compare
RaspberryMatic 3.77.7.20240826

This is release 3.77.7.20240826 of RaspberryMatic which is a minor release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • afb8fd403 - updated OCCU version to 3.77.7-1 integrating full compatibility to the CCU3 3.77.7 firmware which comes with the following changes:
    • HmIP-DLD-S - The configuration parameters were not displayed.
    • HM-MOD-EM-8 - The channel function configuration parameter was locked so that it could not be set.
  • d59644ed6 - fix minor linter warnings in HA-addon config.yaml files.

WebUI changes:

  • c787a5cd0 - add new 0186-WebUI-Fix-HmIPW-DRI16_DRI32-Channel WebUI patch fixing channel operation mode display of HmIPW-DRI16 and HmIPW-DRI32 (#2822, #2736, @Maik2208)
  • b7012280b - update CodeMirror to latest 5.65.17
  • 529e4aaa6 - fix clone operation in recovery system which was broken since introduction of the GPT based partitioning for the generic-x86_64 platform (#2827).

Operating system changes:

  • 4ead2e25b - update tailscale to latest 1.72.0
  • 6f152efba - update buildroot to latest 2024.05.2
  • 7e4fd1016 - bump upstream kernel to 6.6.47
  • 6572cd96f - update rpi-eeprom to pieeprom-2024-07-30 for rpi4 and rpi5
  • f5d715759 - update java azul to latest 11.74.15-ca-jre11.0.24

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus and Weseler485
Loading
0 Join discussion

RaspberryMatic 3.77.6.20240720

20 Jul 11:26
@github-actions github-actions
3.77.6.20240720
35bac31
Compare
Choose a tag to compare
RaspberryMatic 3.77.6.20240720

This is release 3.77.6.20240720 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • updated OCCU version to 3.77.6-1 integrating full compatibility to the CCU3 3.77.6 firmware which comes with the following changes:
    • HmIP-PSM-x: Missing unit added for certain configuration values.
    • When linking HmIP roller shutter/blind actuators with a remote control, the corresponding button had to be pressed twice to raise the shutter.
    • HmIP-BL-x - After switching from blinds to shutters, the actuator was still displayed as blinds under Status/Operation was still displayed as blinds.
    • If more than one HmIP-WGD(-PL) has been taught to the CCU3, the wrong channels may have been offered in the channel selection for links, the wrong channels may have been offered.
    • If more than one HmIP-RGBW is connected to the CCU3, incorrect channels may have been incorrect channels may have been offered for links.
    • HmIP-ESI - After a meter change, the history values of the IEC sensor were not adjusted to the new meter.
    • HmIP-DRG-DALI - An error in the Easymode profile “Brightness (V) - on/brighter” meant that dimming was only possible in steps rather than continuously when a button was pressed for a long time.
    • Missing JSON-API function reportValueUsage added.
    • For wall thermostats with two-point control, the resolution of the hysteresis value in “Hygrostat” operating mode has been changed from 2% to 1%.
    • HmIP-BWTH/FAL/FALMOT - The adjustable values for the switch-on/switch-off delay and the interval for the descaling run have been changed for the Boler and pump heat requirement channels.
  • ⚠️ BREAKING CHANGE ⚠️: the intelnuc platform had been renamed to generic-x86_64 and changed from old Legacy BIOS to (U)EFI BIOS mode for more modern and generic x86 hardware compatibility not just limited to IntelNUC based systems. Existing users who currently use and updated their intelnuc platform images would have to perform a fresh image-based reinstall using the generic-x86_64 images after changing their systems to UEFI boot mode and then simply import their latest sbk-Backup to restore their CCU setup. (#2759).
  • update Mediola NEOserver to latest 2.16.1.
  • when running as a HA addon the daily cronBackup will now place CCU *.sbk type backups to /backup/raspberrymatic to utilize the standard HA backup path.
  • rework data path to /usr/local mapping in a HA addon use case by using a newer possibility by HA to define the target path directly in the addon config.yaml. This allows to remove the S00DataMount init script to bind mount /data to /usr/local as a workaround (#2800).

WebUI changes:

  • add another WebUI fix to the 0039-WebUI-Fix-Style-Glitches patch set which will make sure the rooms and functions popup will come up properly centered rather than using a fixed height.
  • add new 0185-WebUI-Fix-CPPopupCentering WebUI patch to fix broken control panel popup centering for the time and software control panel (#2775).

Operating system changes:

  • update tailscale VPN to 1.70.0.
  • update upstream kernel to 6.6.41 LTS.
  • update buildroot openssh package to 9.8p1 to fix CVE-2024-6387.
  • add rpi kernel upstream patch fixing BLK exceptions with dwc_otg when compiled with GCC >= 13 (#2780).
  • move /dev_host setup from S06InitSystem to S01InitHost and added rtc device node symlinking for the LXC/OCI platform case so that upon startup an already available RTC clock can be correctly identified.
  • change RPI-RF-MOD GPIO pin retrieval for the LXC/OCI platform use case which should fix issue with kernel changing the pin id (#2763).
  • ensure that the symlink for /etc/hosts is not removed for the LXC platform so that in case rootfs is read-only a valid /etc/hosts file can be generated in the /var tmpfs upon bootup. This should resolve issues with incorrectly working DNS requests for "localhost" in case of an LXC container setup.
  • add lxc.signal.stop = SIGTERM definition to global lxc container config to ensure that the correct signal command is used when the host is shutdown and stops all LXC containers (#2762).
  • remove leading "-" from abi.cp15_barrier in sysctl.conf to make sure this sysctl statement is used. This reverts the changes proposed by home-assistant/operating-system#3285.
  • update wiringpi-rpi to latest 3.6.
  • update rpi-eeprom to latest pieeprom-2024-06-05.bin.
  • update qemu-guest-agent to latest 9.0.2.
  • update buildroot to latest 2024.05.1.
  • update rpi-firmware to latest version (1.20240529).
  • update rpi-kernel to latest stable_20240529 (6.6.31).

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus
Loading
1 Join discussion

RaspberryMatic 3.75.7.20240601

01 Jun 17:07
@github-actions github-actions
3.75.7.20240601
e68057f
Compare
Choose a tag to compare
RaspberryMatic 3.75.7.20240601

This is release 3.75.7.20240601 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • allow 32bit based ARM systems (armv7l, etc.) as LXC container hosts (#2728).
  • update Mediola NEOserver to latest 2.15.1.
  • fix ha-proxy.jsto be compatible to latest http-proxy-middleware v3 version which comes with a slightly changed API and thus broke ha-proxy startup in latest versions. In addition, the ha-proxy init script should now correctly report successful startup of ha-proxy (#2720).

WebUI changes:

  • add new WebUI patch (0185-WebUI-Fix-Missing-Units-PSM) to add support for HmIP-PSM-2 and sub types including unit fixes (@PhilippEngler, #2746, #2754).
  • modify 0119-WebUI-Fix-ProofAndSetValue WebUI patch to ensure two digit precision for the input values for the HmIP-ESI (#2712).

Operating system changes:

  • update upstream kernel to latest 6.6.32 LTS.
  • update rpi-kernel to latest stable (stable_20240423 - 6.6.28 LTS).
  • update rpi-firmware to latest stable 1.20240424.
  • update rpi-eeprom for rpi4 and rpi5 to latest pieeprom-2024-05-17.bin.
  • update wiringpi-rpi package to latest 3.4 version for supporting RaspberryPi5.
  • update wiringpi-odroid to latest version.
  • delete 0003-brcmfmac-rpi-firmware buildroot upstream patch since buildroot 2024.02.2 fixes the symlink issues in a different manner.
  • use proper sticky bit definition in /dev/shm and /tmp mounts.
  • update buildroot to latest 2024.02.2.
  • update tailscale to latest 1.66.4 (#2753).
  • make sure CONFIG_NO_HZ and CONFIG_NO_HZ_IDLE is set for all platform kernels.
  • add kernel patch to Revert USB core changes to workaround Z-Wave stick issues (#2732).
  • update qemu-guest-agent to latest 9.0.0.
  • add missing BR2_PACKAGE_LIBUSB to global buildroot config and remove it from each individual defconfig (#2729).
  • fix tinkerboard kernel defconfig and ensure that CONFIG_CPUFREQ_DT_PLATDEV is set which should ensure that recent performance issues with tinker board are fixed (cf. https://homematic-forum.de/forum/viewtopic.php?f=65&t=82395).
  • add patch to 0018-linux-intree-overlays patch to fix incorrect mapping of DT overlays for the rpi platform targets (cf. home-assistant/operating-system#3335).
  • fix multilib32 support for ODROID-C4 for which the incorrect 32bit architecture (a55) was selected.
  • ensure that kernel lockdown security is disabled per default to allow third-party apps like wiringPi to allow to work again (#2721).

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus and PhilippEngler
Loading
0 Join discussion

RaspberryMatic 3.75.7.20240420

21 Apr 00:21
@github-actions github-actions
3.75.7.20240420
5dc4327
Compare
Choose a tag to compare
RaspberryMatic 3.75.7.20240420

This is release 3.75.7.20240420 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • updated OCCU version to 3.75.7-1 integrating full compatibility to the CCU3 3.75.7 firmware which comes with the following changes:
    • fixed error when determining the smallest/maximum permissible value when entering decimal numbers with decimal places.
  • modify S47InitRFHardware init script to accept a HMRF_ADDRESS of 0x000000 and then generate a random RF address in these cases because detect_radio_module can return 0x000000 even if a RF module is BidCos/HmRF capable. (cf. https://homematic-forum.de/forum/viewtopic.php?f=65&t=82127).
  • update integrated Mediola NEOserver to 2.15.0.

WebUI changes:

  • modify 0119-WebUI-Fix-ProofAndSetValue WebUI patch to comply with OCCU 3.75.7 changes.

Operating system changes:

  • add STOPSIGNAL SIGTERM to default Dockerfile to explicitly make sure SIGTERM is used as a default stop signal if running in an OCI environment either under docker or podman (#2717).
  • modify S00watchdog init script so that the watchdog daemon will not be started in virtual OCI/LXC environments which could otherwise affect the watchdog environment of the corresponding host system (#2717).
  • add kernel upstream patch to increase usb storgae quirks character limit to 256 characters so that the currently specified USB quirks string does not result in a kernel bootup error (cf. home-assistant/operating-system#3308).
  • update buildroot to 2024.02.1
  • update rpi-eeprom for rpi4 to latest pieeprom-2024-04-15.bin.
  • update rpi-eeprom to latest pieeprom-2024-04-05.bin for rpi5.
  • update java azul to latest 11.72.19-ca-jre11.0.23
  • update tailscale to 1.64.0
  • update upstream kernel to 6.6.28
  • update rpi-firmware to latest version.
  • add u-boot patch for ODROID-N2 sd card maximum frequency limit to 40MHz.
  • bump rpi kernel to use 6.6.x kernels and update to latest version (6.6.26).
  • modify macvlan HA addon patch script to use the same cidr2network mechanism to identify the right subnet string as the install-docker.sh script wich should make use of this script slightly more comfort.
  • update rpi3 platform device tree list to make sure all rpi3 related device trees are correcty deployed. (cf. home-assistant/operating-system#3301).
  • add buildroot upstream patch to introduce BR2_LINUX_KERNEL_INSTALL_INTREE_OVERLAYS to allow to install device tree overlays build with the kernel. Thus, adapted the rpi builds to use this new option and to completely refrain from using the RPI_FIRMWARE package for deploying the device tree overlay files.
  • remove unnecessary fixup.dat/start.elf references in config.txt of rpi5 platform.
  • enable multipath TCP (MPTCP) support (cf. home-assistant/operating-system#3248).
  • disable UAS via usb-storage.quirks on RPi for ADATA SD600Q (cf. home-assistant/operating-system#3281).
  • ignore warning in case of non-existing CP15 barrier instructions emulation (cf. home-assistant/operating-system#3285).
  • disable CONFIG_WERROR since buildroot disables it anyway.
  • make sure BR2_CCACHE_DIR exists upon fresh execution.
  • add new rpi-eeprom-info tool to output current RaspberryPi5 EEPROM/bootloader version and output if an update is available or not based on the pieeprom.upd file in /boot.
  • rework install-lxc.sh script to perform slightly different default network bridge check than simply checking for the first line in brctl. (#2683).

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus
Loading
4 Join discussion

RaspberryMatic 3.75.6.20240316

16 Mar 20:09
@github-actions github-actions
3.75.6.20240316
9e2072a
Compare
Choose a tag to compare
RaspberryMatic 3.75.6.20240316

This is release 3.75.6.20240316 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

Downloads License Donate GitHub sponsors

Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag

🚧 Changes:

For all changes, see the full commit log.

CCU/HomeMatic service changes:

  • updated OCCU version to 3.75.6-1 integrating full compatibility to the CCU3 3.75.6 firmware which comes with the following changes:
    • update ReGaHss logic engine to version R1.00.0388.0237 (Feb 15 2024):
      • fixed system.Srandom() to correctly return true/false to signal success or failure (#2644).
      • fixed problem with a generally too small socket read buffer size in the http server part which caused login requests to fail in case the http header (incl. cookies) exceeded that size (#2625)
    • Correction when setting the link parameters of the HmIP-BSL.
    • The DALI Gateway did not display any linking parameters for direct links with DT 8 RGBW DALI devices.
    • Corrected profile display for a direct link between a HmIPW-WGD and a shutter actuator.
    • HmIP-BSL - After a firmware update from version 1.x.x to 2.x.x, the "Channel action" parameter was no longer executed within programs.
    • The device firmware update for the HmIP-HAP-B1 could not be started.
    • Security vulnerabilities in the upload routines for device firmwares in addition to other web services in the HMIPServer have been closed (CVE-2024-24578).
    • HmIPW-DRBL4 - Under certain circumstances, the direct links could no longer be called up.
    • When assigning system variables to channels, these were displayed incorrectly within programs.
    • HmIP-RGBW / HmIP-DRG-DALI - The value 0% has been added to the Easymode parameter "Level limitation when dimming down".
    • HmIP-FALMOT - A configuration parameter has been added that makes it possible to mark the channels used. The status (e.g. adaptation movement) and any error messages for the channel are then displayed on the "Status and operation" page.
    • When creating heating groups, the default group type was changed from "Heating control" to "HmIP heating control".
  • added LXC container platform support for amd64, arm64 and armhf based systems. Now it is possible to install RaspberryMatic as an LXC container either in a ProxmoxVE environment or under a standard LXC container environment under Debian-based systems like Ubuntu, RaspberryPiOS, Armbian, etc. similar to how piVCCU is working. See the adapted ProxmoxVE and LXC installation documentation for more details (#2636).
  • update mediola NEOserver to latest 2.14.1 and rework package managment to use original static release tar.gz instead and apply our changes via dedicated package patch files instead.

WebUI changes:

  • add style glitch fix to 0039-WebUI-Fix-Style-Glitches WebUI patch by adding resize:auto to txVals/txValue textarea and min-width:min-content to messagebox css styles so that all message boxes will automatically adapt to its content, thus textarea elements resizing causing automatic resize of the message boxes (#2634, #2440).
  • modify 0097-WebUI-SetSysvarValueByUser fixing vertical resizing of enum-based web edit textareas (#2634).

Operating system changes:

  • add changes to disable/change certain WebUI and startup script features in case a LXC platform installation is identified. Thus, the firmware update dialog will now show a reference to the documentation instead. Furthermore the RPI-RF-MOD led modules should now be loaded correctly and the checkFirmwareUpdate.sh script also does not allow to perform an update because LXC platform updates have to be performed within the virtualization/host environment like with docker/oci/home assistant.
  • modify install-proxmox.shto allow to install RaspberryMatic as an LXC container which will also ensure that all necessary additional host packages (e.g. kernel modules) are installed before the RaspberryMatic VM installation.
  • added new install-lxc.sh installation script to allow to install RaspberryMatic as a LXC based container under Debian-based systems.
  • update buildroot to 2024.02 and adapt all upstream patches and grub bootloader dependencies.
  • bump upstream kernel to 6.6.x for generic-aarch64,intelnuc,odroid,ova and tinkerboard platform and synced kernel patches accordingly and split the kconfig fragment files for kernel 6.1 and 6.6.
  • change usbstoragequirks supplied to the kernel commandline to consider more USB storage exceptions for rpi platforms.
  • update tailscale VPN to 1.60.1.
  • update upstream kernel to 6.6.21 for generic-aarch64,intelnuc,odroid,ova and tinkerboard platform.
  • remove busybox wget applet as we have upstream wget installed and also add iostat as a new integral tool. Furthermore top now also allows to display memory statistics for more verbose analyses on process-wise memory usage.
  • unify kernel command line option management by always using cmdline.txt from bootfs for specifying additional cmdline options for the kernel.
  • add --enable-blumenthal-aes configure option to netsnmp daemon compilation to enable AES192/AES256 encryption for improved SNMPv3 support (#2673).
  • update wiringpi-odroid to latest version.
  • add CONFIG_SERIAL_PRESENT to rpi uboot config and re-add no-stdout chosen fragment to all rpi related rpi-rf-mod dts overlays to ensure that u-boot will not output any debug info on the standard stdout.
  • update u-boot to 2024.01 and remove all unnecessary uboot-patches already integrated upstream.
  • update qemu-guest-agent to latest 8.2.2.
  • update java azul for armhf to 11.70.15-ca-hl-jre11.0.22
  • update rpi-eeprom to pieeprom-2024-02-16.bin
  • add check for HMLGW to docker healthcheck. (cf. https://homematic-forum.de/forum/viewtopic.php?f=65&t=80283&p=795894#p795894).
  • re-enable 1wire kernel support (#2552).
  • unify /run and /var/run to use same tmpfs (#2639).
  • fix S06InitSystem to correctly grep for a root user entry.
  • remove dtoverlay=miniuart-bt for rpi5 as not required anymore.
  • switch rpi5 to use 16k memory pages per default for increased performance while still compatible with older apps.
  • use BR2_ARM64_PAGE_SIZE_64K for oci_arm64 platform to allow to use the docker container also on hardware platforms with more than 4K memory page size (e.g. RaspberryPi5).
  • make sure a valid shadow file is always present.
  • remove irqbalance from global use as it has no use in container based environments.
  • modify cortex-based cpu definitions in buildroot configs to better match individual hardware specs of our different ARM platforms.
  • optimize ARM cortex/FPU definitions to better match our ARM platform hardware specs.

👪 Contributors (alphabetically):

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

Read more

Contributors

jens-maus
Loading
0 Join discussion