Vertical swing level

[bilogic]

Is there a way to set the vertical swing level? Is it via supported_swing_list?

[Frans1960]

I have the same issue with the vertical swing. My remote control has two buttons for the vertical swing one for the auto swing mode and one for the fixed positions.
If I press the auto swing button, it goes from Auto to the last fixed position and after pressing the button again it goes from the ast fixed position to Auto . If I press the fixed position button it it send a fixed position.

These are the messages send by by the Auto position button on the remote control:
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB26010024010928000000006B","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Lowest","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB260100240109000000000043","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Auto","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB260100200109280000000067","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"Off","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Lowest","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}

These are the messages send by the fixed position button on the remote control:
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB26010024010908000000004B","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Highest","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB260100240109100000000053","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"High","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB26010024010918000000005B","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Middle","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB260100240109200000000063","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Low","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}
{"IrReceived":{"Protocol":"MITSUBISHI112","Bits":112,"Data":"0x23CB26010024010928000000006B","Repeat":0,"IRHVAC":{"Vendor":"MITSUBISHI112","Model":-1,"Command":"Control","Mode":"Heat","Power":"On","Celsius":"On","Temp":22,"FanSpeed":"Max","SwingV":"Lowest","SwingH":"Auto","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1,"iFeel":"Off","SensorTemp":null}}}

[sang131313]

The blueprint climate_vane_control_tasmota-irhvac.yaml is a way to set the vertical swing level through a input_select in configraiton.yaml, but when select "off" there is no answer. The other selection will work.

[cociweb]

A new way of implementation for vertical&horizontal swing is cooking here: home-assistant/core#125578

The architectural discussion is already accepted after 3 years....

@nao-pon @hristo-atanasov can you please take a look on it?

[hristo-atanasov]

It is still incomplete .. there are two cases:

1. Default functionality: 1 drop-down with off, horizontal, vertical, both
2. Two drop-downs: One drop-down for horizontal and one for vertical.
   Currently, when it is not the first case (default one), we will have only one drop-down for horizontal.. Or we have to dynamically populate the default drop-down with other options. The right way is to keep them separated.

[hristo-atanasov]

Exactly! We have services for setting SwingH and SwingV.

The blueprint climate_vane_control_tasmota-irhvac.yaml is a way to set the vertical swing level through a input_select in configraiton.yaml, but when select "off" there is no answer. The other selection will work.