Prepare 13.2.rc1 #3596
Prepare 13.2.rc1 #3596
Conversation
Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 6.6.1 to 6.7.0. - [Release notes](https://github.com/docker/build-push-action/releases) - [Commits](docker/build-push-action@v6.6.1...v6.7.0) --- updated-dependencies: - dependency-name: docker/build-push-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
…3549) Since updating to Buildroot 2024.02, the iwlwifi loads a different version of firmware for Intel AX cards (reported on AX210) which also needs the pnvm file. However, unlike firmwares, the load method is different and the driver can't load a compressed file. Disable compression for all .pnvm files to fix this. * buildroot baa16784d2...55be56d521 (1): > package/linux-firmware: exclude some files from compression Fixes #3477
…3549) Since updating to Buildroot 2024.02, the iwlwifi loads a different version of firmware for Intel AX cards (reported on AX210) which also needs the pnvm file. However, unlike firmwares, the load method is different and the driver can't load a compressed file. Disable compression for all .pnvm files to fix this. * buildroot baa16784d2...55be56d521 (1): > package/linux-firmware: exclude some files from compression Fixes #3477 (cherry picked from commit d3a43a4)
* buildroot 55be56d521...01188d9c38 (1): > Merge tag '2024.02.5' into 2024.02.x-haos
Fix AX210 firmware files, this time for real. In #3549 we still had only ucode and pnvm files for AX211, AX210 was still missing the pnvm file, because its ucode was provided through IWLWIFI_22000 without appropriate pnvm file. Both AX210 and AX211 firmwares are now installed with IWLWIFI_6E which includes both pnvm and ucode files. Also some firmwares which are not used by the current kernel can be removed, because the kernel always only loads the most recent one. * buildroot 01188d9c38...a2c10a16a0 (2): > Revert "package/linux-firmware: exclude some files from compression" > package/linux-firmware: fix AX210 support, stick to latest supported ucode API, reorganize the split Fixes #3477
HP t520 have been reported to have the same issues as Atom boards with bad UEFI firmware that doesn't work well with the new EFI loader used since GRUB 2.12. Apply the patch to use legacy loader for its CPU ID as well. Fixes #3557
) If an attempt to access R2 artifacts is made before the files exist, the 404 reply gets cached and it's not possible to access the file after it's been created without purging the cache, essentially doing a cache poisoning for future build artifacts. To avoid it, list all files that have been created by the build and call the purge cache API. As there's a limit for number of files that can be purged in a single API call [1], the GNU split utility is used to split intermediary list of files to chunks of 30 URLs, which is then converted to a JSON array and passed to the curl command. [1] https://developers.cloudflare.com/api/operations/zone-purge#purge-cached-content-by-url
* Update Docker to v27.2.0 Update Docker and containerd to latest supported version. * buildroot a2c10a16a0...c68e03d96b (3): > package/containerd: bump version to v1.7.21 > package/docker-cli: bump version to v27.2.0 > package/docker-engine: bump version to v27.2.0 * package/hassio: update DinD container to v27.2
Bump labgrid to latest release. None of the changes require adjustments in the tests. Remove pytest from requirements.txt, it's not needed anymore, so let pip to resolve the correct (latest) version from labgrid's dependencies. With these new dependencies, previous DeprecationWarnings on Python 3.12 are gone now.
Test that systemctl reports no failed units at the end of the basic test.
If the system fails to boot, some kernel messages may not be shown before the system fully boots. Enable the debug option for rescue shell options to have an easy way to see those without modifying GRUB options. This will increase log verbosity and turn on debug logging for Systemd as well [1]. [1] https://www.freedesktop.org/software/systemd/man/latest/systemd.html#debug
* Relocate HAOS Systemd drop-ins to /usr/lib/systemd With some exceptions, Systemd drop-ins overriding default unit configuration have been placed to `/etc/systemd/system`. This is meant for user overrides of those, or per `man 5 systemd.unit` for "system unites created by the administrator". Relocate all of these to `/usr/lib/systemd` which should be used as path for units "installed by the distribution package manager" which is closer to what we're trying to achieve. This will make it easier to detect changes to unit files once we enable the possibility to edit the content of /etc. * Patch systemd-timesyncd.service instead of replacing it fully
* buildroot c68e03d96b...d59d09ad38 (2): > package/procps-ng: fix build with BR2_PACKAGE_SYSTEMD enable > Merge tag '2024.02.6' into 2024.02.x-haos
Guest agent doesn't start because if HyperV Enlightenments are enabled, the virtualization gets detected incorrectly. Backport Systemd patch that fixes the detection, allowing the guest-agent service to meet its dependencies. This patch should be no longer needed after update of Systemd to v256, or in case the patch gets eventually backported to the v254 stable branch. Fixes #3565
Fix loading issues on this Intel-based platform as well. As described in the patch commit message, there will be likely bigger collateral effect by referring just to the CPU ID but it shouldn't have major detrimental effects. [1] #3305 (comment)
📝 WalkthroughWalkthroughThe changes involve updates to various configuration files, scripts, and documentation across the project. Key modifications include enhancing the CloudFlare cache purging process to dynamically generate a purge list based on artifact versions, updating the Linux kernel version across multiple configurations, and adjusting systemd service dependencies. Additionally, there are updates to Docker image versions and the introduction of a new test function to check systemd unit states. These changes collectively improve the project's functionality and maintainability. Changes
Sequence Diagram(s)sequenceDiagram
participant User
participant System
participant CloudFlare
User->>System: Trigger cache purge
System->>System: Generate purge list from JSON
System->>CloudFlare: Send purge request (up to 30 files)
CloudFlare-->>System: Confirm purge
System-->>User: Purge completed
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Outside diff range and nitpick comments (5)
tests/requirements.txt (1)
pytest is still utilized in the test suite despite its removal from
requirements.txt.
pytestimports and fixtures are present in multiple test files.tests/requirements.txtstill includes related packagespytest-dependencyandpytest-timeout.- Absence of the
pythonorpython3command may indicate environment setup issues.🔗 Analysis chain
Line range hint
1-4: Verify intentional removal of pytest dependencyThe pytest dependency (previously version 7.2.2) has been removed from the requirements. As pytest is a fundamental testing framework, please confirm if this removal was intentional.
To check the impact of removing pytest, run the following script:
If pytest is still required but managed elsewhere (e.g., in a parent requirements file or installed globally), please add a comment in this file explaining its absence to prevent future confusion.
To further verify the removal of the pytest dependency, please run the following scripts:
To gather more insights into the removal of the pytest dependency, please execute the following scripts:
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check for pytest usage in test files # Test: Search for pytest imports and usage in test files rg --type python -g 'tests/**/*.py' '(import pytest|pytest\.)' -A 5 # Test: Check if pytest is installed globally or in a virtual environment python -m pytest --versionLength of output: 203
Script:
#!/bin/bash # Description: Check for pytest usage in test files using fd and grep # Test: Find all Python test files and search for pytest imports and usage fd -e py tests | xargs grep -H -A 5 -E "import pytest|pytest\." # Test: Check if python3 is installed and get pytest version if available python3 -m pytest --version || echo "python3 or pytest is not installed"Length of output: 249
Script:
#!/bin/bash # Description: Perform a comprehensive search for 'pytest' across the entire codebase. # Test: Recursively search for the term 'pytest' in all files. grep -r 'pytest' . || echo "No occurrences of 'pytest' found in the codebase." # Test: Display the contents of tests/requirements.txt to verify current dependencies. cat tests/requirements.txtLength of output: 3056
buildroot-external/board/pc/grub.cfg (1)
80-84: Consider adding a comment explaining the debug parameterThe changes to add the
debugparameter to both Slot A and Slot B rescue shell configurations are good. To improve maintainability, consider adding a brief comment above these menu entries explaining the purpose of thedebugparameter and when it should be used. This would help future maintainers understand the reasoning behind these configurations.tests/smoke_test/test_basic.py (1)
75-78: LGTM! Consider a minor improvement for clarity.The new test function
test_systemctl_check_no_failedis well-implemented and aligns with the PR objectives. It correctly checks for failed systemd units and provides helpful debug information if the assertion fails.For improved clarity, consider adding a brief docstring explaining the purpose of this test. Here's a suggested implementation:
@pytest.mark.dependency(depends=["test_init"]) def test_systemctl_check_no_failed(shell): + """Verify that no systemd units are in a failed state.""" output = shell.run_check("systemctl --no-pager -l list-units --state=failed") assert "0 loaded units listed." in output, f"Some units failed:\n{"\n".join(output)}".github/workflows/artifacts-index.yaml (1)
86-102: Improved CloudFlare cache purging implementation with minor suggestionsThe new implementation for flushing the CloudFlare cache is a significant improvement. It dynamically generates the purge list based on artifact versions and handles the CloudFlare API's 30-file limit efficiently. However, there are a few suggestions for improvement:
The
splitcommand on line 93 uses the-dflag, which might not be available on all systems. Consider using a more portable alternative or add a comment explaining the requirement.The loop variable
fis not quoted in the for loop (line 95). To prevent potential issues with filenames containing spaces, consider quoting it:-for f in purge_list_chunked*; do +for f in purge_list_chunked*; do
- The curl command doesn't check for a successful response from the CloudFlare API. Consider adding error handling to ensure the purge was successful.
To address point 3, you could modify the curl command to check for a successful response:
curl --silent --show-error --fail -X POST \ "https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache" \ -H "Authorization: Bearer ${{ secrets.CF_PURGE_TOKEN }}" \ -H "Content-Type: application/json" \ - --data "{\"files\": ${files}}" + --data "{\"files\": ${files}}" | jq -e '.success == true' > /dev/null || echo "Failed to purge cache for chunk $f"This change will output an error message if the API call was not successful, allowing for easier debugging if issues occur.
buildroot-external/patches/grub2/0002-loader-efi-linux-use-legacy-loader-for-broken-Intel-.patch (1)
Line range hint
58-126: New functiongrub_efi_has_broken_efi_stub_loaderlooks good, with minor suggestions.The function is well-implemented and effectively identifies systems with broken EFI stub loaders using SMBIOS data. It handles both SMBIOS and SMBIOS3 tables and uses a conservative approach to identify specific problematic processors.
Suggestions for improvement:
- Consider adding more inline comments to explain the logic, especially for the SMBIOS parsing.
- The hardcoded processor IDs might require periodic updates. Consider implementing a more flexible solution, such as reading from a configuration file, to make future updates easier.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (27)
- .github/workflows/artifacts-index.yaml (1 hunks)
- .github/workflows/build.yaml (1 hunks)
- .gitmodules (1 hunks)
- Documentation/kernel.md (1 hunks)
- buildroot (1 hunks)
- buildroot-external/board/pc/grub.cfg (1 hunks)
- buildroot-external/configs/generic_aarch64_defconfig (1 hunks)
- buildroot-external/configs/generic_x86_64_defconfig (1 hunks)
- buildroot-external/configs/green_defconfig (1 hunks)
- buildroot-external/configs/khadas_vim3_defconfig (1 hunks)
- buildroot-external/configs/odroid_c2_defconfig (1 hunks)
- buildroot-external/configs/odroid_c4_defconfig (1 hunks)
- buildroot-external/configs/odroid_m1_defconfig (1 hunks)
- buildroot-external/configs/odroid_m1s_defconfig (1 hunks)
- buildroot-external/configs/odroid_n2_defconfig (1 hunks)
- buildroot-external/configs/odroid_xu4_defconfig (1 hunks)
- buildroot-external/configs/ova_defconfig (1 hunks)
- buildroot-external/configs/tinker_defconfig (1 hunks)
- buildroot-external/meta (1 hunks)
- buildroot-external/package/hassio/create-data-partition.sh (1 hunks)
- buildroot-external/patches/grub2/0002-loader-efi-linux-use-legacy-loader-for-broken-Intel-.patch (5 hunks)
- buildroot-external/patches/systemd/0003-systemd-timesyncd-delay-start-after-network-online.t.patch (1 hunks)
- buildroot-external/patches/systemd/0004-detect-virt-detect-hyperv-enlightened-qemu-as-qemu-n.patch (1 hunks)
- buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service (0 hunks)
- buildroot-external/rootfs-overlay/usr/lib/systemd/system/systemd-timesyncd.service.d/hassos.conf (0 hunks)
- tests/requirements.txt (1 hunks)
- tests/smoke_test/test_basic.py (1 hunks)
💤 Files not reviewed due to no reviewable changes (2)
- buildroot-external/rootfs-overlay/etc/systemd/system/systemd-timesyncd.service
- buildroot-external/rootfs-overlay/usr/lib/systemd/system/systemd-timesyncd.service.d/hassos.conf
✅ Files skipped from review due to trivial changes (1)
- buildroot
🧰 Additional context used
📓 Path-based instructions (3)
Documentation/kernel.md (6)
Pattern
*/**(html|markdown|md): - For instructional content in documentation, use a direct and authoritative tone. Avoid expressions of politeness such as 'may' or 'please', and ensure the goal of the instruction is fronted.
- Apply the Microsoft Style Guide to ensure documentation maintains clarity and conciseness.
- In step-by-step instructions, front the location phrase in the instructional sentence.
- In step-by-step instructions, front the 'goal' in the instructional sentence.
- In step-by-step instructions, if in doubt what to front, front the 'goal' before the location phrase in the instructional sentence.
- do not hyphenate terms like 'top-right' or 'bottom-left' with 'corner'
Pattern
*/**(html|markdown|md): - Use bold to mark UI strings.
- If "" are used to mark UI strings, replace them by bold.
Pattern
*/**(html|markdown|md): - Be brief in your replies and don't add fluff like "thank you for..." and "Please let me know if"
Pattern
*/**(html|markdown|md): - Use sentence-style capitalization also in headings.
Pattern
*/**(html|markdown|md): do not comment on HTML used for icons
Pattern
*/**(html|markdown|md): Avoid flagging inline HTML for embedding videos in future reviews for this repository.buildroot-external/meta (6)
Pattern
*/**(html|markdown|md): - For instructional content in documentation, use a direct and authoritative tone. Avoid expressions of politeness such as 'may' or 'please', and ensure the goal of the instruction is fronted.
- Apply the Microsoft Style Guide to ensure documentation maintains clarity and conciseness.
- In step-by-step instructions, front the location phrase in the instructional sentence.
- In step-by-step instructions, front the 'goal' in the instructional sentence.
- In step-by-step instructions, if in doubt what to front, front the 'goal' before the location phrase in the instructional sentence.
- do not hyphenate terms like 'top-right' or 'bottom-left' with 'corner'
Pattern
*/**(html|markdown|md): - Use bold to mark UI strings.
- If "" are used to mark UI strings, replace them by bold.
Pattern
*/**(html|markdown|md): - Be brief in your replies and don't add fluff like "thank you for..." and "Please let me know if"
Pattern
*/**(html|markdown|md): - Use sentence-style capitalization also in headings.
Pattern
*/**(html|markdown|md): do not comment on HTML used for icons
Pattern
*/**(html|markdown|md): Avoid flagging inline HTML for embedding videos in future reviews for this repository.tests/requirements.txt (6)
Pattern
*/**(html|markdown|md): - For instructional content in documentation, use a direct and authoritative tone. Avoid expressions of politeness such as 'may' or 'please', and ensure the goal of the instruction is fronted.
- Apply the Microsoft Style Guide to ensure documentation maintains clarity and conciseness.
- In step-by-step instructions, front the location phrase in the instructional sentence.
- In step-by-step instructions, front the 'goal' in the instructional sentence.
- In step-by-step instructions, if in doubt what to front, front the 'goal' before the location phrase in the instructional sentence.
- do not hyphenate terms like 'top-right' or 'bottom-left' with 'corner'
Pattern
*/**(html|markdown|md): - Use bold to mark UI strings.
- If "" are used to mark UI strings, replace them by bold.
Pattern
*/**(html|markdown|md): - Be brief in your replies and don't add fluff like "thank you for..." and "Please let me know if"
Pattern
*/**(html|markdown|md): - Use sentence-style capitalization also in headings.
Pattern
*/**(html|markdown|md): do not comment on HTML used for icons
Pattern
*/**(html|markdown|md): Avoid flagging inline HTML for embedding videos in future reviews for this repository.
🔇 Additional comments (31)
tests/requirements.txt (1)
2-3: Approve unchanged pytest plugin dependenciesThe versions of pytest-dependency (0.6.0) and pytest-timeout (2.3.1) remain unchanged, which is consistent with the PR objectives.
.gitmodules (1)
4-4: LGTM! Buildroot submodule branch updated.The change to update the Buildroot submodule branch from '2022.02.x-haos' to '2024.02.x-haos' is consistent with the PR objectives. This update to a newer version of Buildroot (2024.02.x) is a significant change that should improve the build process.
To ensure this change is consistent across the project, please run the following verification script:
This script will help ensure that the Buildroot update is consistently applied across the project and identify any areas that might need additional attention due to this version change.
buildroot-external/meta (1)
2-2: LGTM: Version update is correct.The increment of VERSION_MINOR from "1" to "2" aligns with the PR objective of preparing for version 13.2.rc1.
To ensure consistency across the project, please run the following script:
This script will help identify any inconsistencies or missing updates related to the version change.
Documentation/kernel.md (1)
6-24: Kernel version updates look good.The kernel version updates for various boards to 6.6.52 are consistent and appear to be correct. This update brings most boards to the same kernel version, which is a positive change for consistency and maintenance.
It's worth noting that the Raspberry Pi boards (including Home Assistant Yellow) remain at version 6.6.31. While this might be intentional, it could be beneficial to provide an explanation for this difference. To verify the intentionality of this difference, you may want to run the following command:
This will search for any mentions of the specific Raspberry Pi kernel version in markdown files, which might provide context for why it hasn't been updated.
buildroot-external/package/hassio/create-data-partition.sh (1)
25-25: Approve Docker image version update with verification recommendation.The update from
docker:26.0-dindtodocker:27.2-dindis likely an improvement, bringing bug fixes and potentially new features. However, to ensure system stability:
- Verify that this version aligns with the Buildroot version used in the project, as mentioned in the comment above.
- Confirm that the overlay2 storage driver is fully supported and behaves as expected in version 27.2.
- Run comprehensive tests to ensure compatibility with the rest of the system and that the data partition initialization process works correctly with the new Docker version.
To verify the Docker version used by Buildroot, you can run:
This script will help ensure consistency between the Docker versions used in Buildroot and this script.
buildroot-external/patches/systemd/0003-systemd-timesyncd-delay-start-after-network-online.t.patch (5)
1-15: Excellent commit message and explanationThe commit message clearly explains the rationale behind the changes and provides context by referencing previous issues and pull requests. This demonstrates a well-considered approach to solving the problem of NTP synchronization failing due to network unavailability during boot.
28-30: Appropriate addition of network-online.target dependencyThe addition of
network-online.targetto the 'After' directive is a good solution to ensure that the systemd-timesyncd service starts only after the network is confirmed to be online. This change directly addresses the issue mentioned in the commit message where NTP sync was failing due to network unavailability during boot.
29-31: Appropriate removal of sysinit.target dependencyThe removal of
sysinit.targetfrom the 'Before' directive is consistent with the goal of delaying the start of systemd-timesyncd until after the network is online. This change allows for more flexibility in the startup sequence while still ensuring that the service starts before shutdown. It's a logical adjustment given the new network-online dependency.
39-40: Improved target specificationChanging the 'WantedBy' directive from
sysinit.targettotime-sync.targetis a more appropriate and specific target for the systemd-timesyncd service. This change aligns the service with its primary function of time synchronization and is consistent with the overall goal of improving the timing of NTP synchronization attempts.
1-41: Overall assessment: Well-structured and effective patchThis patch successfully modifies the systemd-timesyncd service configuration to address the issue of NTP synchronization failing due to network unavailability during boot. The changes are consistent, well-reasoned, and effectively implement the following improvements:
- Ensure the service starts after the network is online.
- Remove unnecessary dependencies on system initialization.
- Align the service with the appropriate time synchronization target.
These modifications should result in more reliable NTP synchronization and improved system boot behavior.
buildroot-external/board/pc/grub.cfg (2)
80-80: LGTM: Enhanced debugging for Slot A rescue shellThe addition of the
debugparameter to the kernel command line for the Slot A rescue shell is a good improvement. This change enables kernel debugging, which will be valuable for troubleshooting boot issues when using the rescue shell.
84-84: LGTM: Consistent debugging enhancement for Slot B rescue shellThe addition of the
debugparameter to the kernel command line for the Slot B rescue shell is appropriate and maintains consistency with the Slot A configuration. This change ensures that kernel debugging is available in the rescue shell for both slots, which is beneficial for troubleshooting.buildroot-external/patches/grub2/0002-loader-efi-linux-use-legacy-loader-for-broken-Intel-.patch (3)
Line range hint
1-40: Well-documented patch with clear explanations and references.The commit message effectively communicates the purpose of the patch, providing context and references to relevant discussions. The inclusion of additional information about affected hardware is valuable for future maintenance and troubleshooting.
Line range hint
128-140: Changes togrub_cmd_linuxfunction effectively integrate the new compatibility check.The modification to the
grub_cmd_linuxfunction successfully incorporates the newgrub_efi_has_broken_efi_stub_loader()check. This change ensures that systems with broken EFI stub loaders will fall back to the legacy loader, maintaining compatibility while still using the new loader for other systems.
Line range hint
1-140: Overall, this is a well-implemented and necessary patch.The patch effectively addresses compatibility issues with specific Intel and AMD processors by implementing a targeted solution to use the legacy loader when necessary. The changes are well-documented, with clear explanations and references to relevant discussions. The implementation is conservative and should minimize potential side effects on unaffected systems.
Key strengths of this patch:
- Clear documentation and commit message
- Targeted solution using SMBIOS data
- Minimal impact on existing code structure
While the implementation is solid, consider the following for future maintenance:
- Adding more inline comments to explain complex logic
- Implementing a more flexible solution for managing affected processor IDs
buildroot-external/configs/khadas_vim3_defconfig (1)
19-19: LGTM. Verify compatibility with Khadas VIM3 hardware.The update of the Linux kernel version from 6.6.46 to 6.6.52 is in line with the PR objectives. This minor version update likely includes bug fixes and security patches, which is beneficial for the system.
To ensure system stability, please confirm:
- This kernel version has been tested with the Khadas VIM3 hardware.
- All system components and drivers are compatible with this kernel version.
- The build process completes successfully with this new kernel version.
You can verify the kernel version in the build logs or by running:
buildroot-external/configs/odroid_c4_defconfig (1)
19-19: LGTM! Verify compatibility with the updated kernel version.The Linux kernel version has been updated from 6.6.46 to 6.6.52. This minor version update likely includes bug fixes and security patches, which aligns with the PR objectives.
To ensure compatibility, please verify that:
- The new kernel version (6.6.52) is compatible with all the hardware components of the Odroid C4 board.
- All custom patches and configurations still apply correctly to the new kernel version.
- The system boots and functions as expected with the updated kernel.
You can use the following script to check for any potential compatibility issues:
buildroot-external/configs/odroid_c2_defconfig (1)
19-19: LGTM. Verify kernel compatibility with the system.The update of the Linux kernel version from 6.6.46 to 6.6.52 is in line with the PR objectives. This minor version update likely includes bug fixes and security patches, which is beneficial for the system.
To ensure system stability and compatibility with the new kernel version, please:
- Review the changelog for version 6.6.52 to identify any changes that might affect the Odroid C2 board or our specific use case.
- Conduct thorough testing of the system with this new kernel version, particularly focusing on:
- Boot process
- Hardware compatibility
- Network functionality
- Any custom drivers or modules
Run the following script to check for any kernel-related issues in the system logs after updating:
If any issues are found, please document them and consider reverting to the previous kernel version if necessary.
buildroot-external/configs/tinker_defconfig (1)
21-21: LGTM: Kernel version update looks good.The update of the Linux kernel version from 6.6.46 to 6.6.52 is in line with the PR objectives. This minor version bump likely includes important bug fixes and security updates.
To ensure system stability, please verify:
- All necessary patches for kernel 6.6.52 are applied.
- The new kernel version is compatible with all hardware components of the Tinker board.
- All kernel-dependent packages and drivers are compatible with version 6.6.52.
You can use the following script to check for any potential compatibility issues:
✅ Verification successful
**: Kernel version update to 6.6.52 has been consistently applied across all relevant configuration files and documentation. No TODO or FIXME comments related to the kernel version were found, and there are no pending patches for version 6.6.52.
Please ensure the following to maintain system stability:
- All necessary patches for kernel 6.6.52 are indeed not required.
- Compatibility with all hardware components of the Tinker board has been tested.
- All kernel-dependent packages and drivers function correctly with version 6.6.52.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check for potential compatibility issues with kernel 6.6.52 # Test: Search for any TODO or FIXME comments related to kernel version rg --type make "TODO|FIXME" $(git ls-files | grep -E "Makefile|\.mk$") # Test: Check if there are any pending patches for kernel 6.6.52 ls $(git rev-parse --show-toplevel)/buildroot-external/patches/linux/6.6.52/ 2>/dev/null # Test: Verify if any kernel config fragments mention specific versions rg --type kconfig "6\.6\.(4[6-9]|5[0-2])" $(git rev-parse --show-toplevel)/buildroot-external/kernel/Length of output: 1492
Script:
#!/bin/bash # Description: Re-verify potential compatibility issues with kernel 6.6.52 # Test: Search for any TODO or FIXME comments related to kernel version rg --type make "TODO|FIXME" $(git ls-files | grep -E "Makefile|\.mk$") # Test: Check if there are any pending patches for kernel 6.6.52 ls "$(git rev-parse --show-toplevel)/buildroot-external/patches/linux/6.6.52/" 2>/dev/null # Test: Verify if any kernel config fragments mention specific versions fd -e Kconfig | xargs rg "6\.6\.(4[6-9]|5[0-2])"Length of output: 3124
buildroot-external/configs/odroid_xu4_defconfig (1)
20-20: LGTM. Verify compatibility and update changelog.The update of the Linux kernel version from 6.6.46 to 6.6.52 looks good. This minor version bump likely includes important bug fixes and security updates.
Please ensure the following:
- Verify that this kernel version is compatible with all other components in the system.
- Test the build and functionality with this new kernel version.
- Update the changelog to reflect this kernel update if not already done.
To verify the kernel version change and its impact, you can run the following script:
This script will help ensure that the kernel version update is consistent across the project, identify any potential compatibility issues, and verify if the changelog has been updated.
buildroot-external/configs/odroid_n2_defconfig (1)
19-19: LGTM: Kernel version update looks good.The update from Linux kernel version 6.6.46 to 6.6.52 is a minor version bump, which typically includes bug fixes and security updates. This change is likely to improve system stability and security without introducing breaking changes.
To ensure this update doesn't conflict with any custom patches or configurations, please:
- Verify that all custom kernel patches (if any) still apply cleanly to the new kernel version.
- Run a full build and test cycle to ensure system stability with the new kernel.
- Review the changelog for version 6.6.52 to be aware of any significant changes or security fixes: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.52
buildroot-external/configs/odroid_m1_defconfig (1)
19-19: LGTM: Kernel version update looks good.The update of the Linux kernel version from 6.6.46 to 6.6.52 is in line with the PR objectives. This change likely includes bug fixes and security patches, which is beneficial for the project.
To ensure consistency across the project, please run the following script to verify that all references to the kernel version have been updated:
✅ Verification successful
LGTM: Kernel version successfully updated to 6.6.52
The
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUEinbuildroot-external/configs/odroid_m1_defconfighas been correctly updated to"6.6.52". No remaining references to the old kernel version"6.6.46"were found, ensuring consistency across the project's configuration.🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check for any remaining references to the old kernel version # Test: Search for the old kernel version. Expect: No results. rg --type-add 'config:*.config' --type config '6\.6\.46' # Test: Confirm the new kernel version is used consistently. Expect: Consistent use of 6.6.52. rg --type-add 'config:*.config' --type config '6\.6\.52'Length of output: 117
Script:
#!/bin/bash # Description: Retrieve the current value of BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE in odroid_m1_defconfig grep '^BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE=' buildroot-external/configs/odroid_m1_defconfigLength of output: 142
buildroot-external/configs/odroid_m1s_defconfig (1)
19-19: LGTM: Kernel version update looks good.The Linux kernel version has been updated from 6.6.46 to 6.6.52, which is in line with the PR objectives. This minor version update likely includes important bug fixes and security patches, which should improve system stability and security.
To ensure this update doesn't introduce any compatibility issues, please verify:
- The updated kernel version works correctly with all hardware components of the Odroid M1S board.
- Any custom patches or configurations for the previous kernel version are still applicable or have been updated accordingly.
You can use the following script to check for any Odroid M1S specific kernel patches or configurations that might need attention:
If the script returns any results, please review those files to ensure they are compatible with the new kernel version.
buildroot-external/configs/green_defconfig (1)
19-19: LGTM: Kernel version update looks good.The Linux kernel version has been updated from 6.6.46 to 6.6.52, which is consistent with the PR objectives. This minor version update likely includes important bug fixes and security patches.
To ensure compatibility with the "green" device, please verify:
- Any custom kernel patches still apply cleanly.
- The updated kernel builds successfully with the existing configuration.
- All device-specific features and drivers continue to function as expected.
You can use the following script to check for any build issues:
buildroot-external/configs/generic_aarch64_defconfig (1)
19-19: LGTM: Kernel version update looks good.The Linux kernel version has been updated from 6.6.46 to 6.6.52, which aligns with the PR objectives. This minor version update likely includes bug fixes and security patches.
To ensure the update doesn't introduce any regressions, please verify:
- The build process completes successfully with the new kernel version.
- All existing functionalities work as expected after the update.
- The changelog for kernel versions 6.6.47 through 6.6.52 to identify any changes that might affect the system.
You can use the following script to check the kernel changelog:
This script will help you quickly review the major changes in each version and identify any potential impacts on the system.
✅ Verification successful
LGTM: Kernel version update to 6.6.52 appears valid.
The changelogs for versions 6.6.47 through 6.6.52 have been reviewed and no critical issues were identified in the available sections. The updates primarily include bug fixes and security patches.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Fetch and display the changelog for Linux kernel versions 6.6.47 through 6.6.52 for version in $(seq 47 52); do echo "Changelog for version 6.6.$version:" curl -s "https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.$version" | head -n 20 echo "---" doneLength of output: 83
Script:
#!/bin/bash # Description: Fetch and display the changelog for Linux kernel versions 6.6.47 through 6.6.52 without using 'seq' for version in 47 48 49 50 51 52; do echo "Changelog for version 6.6.$version:" curl -s "https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.$version" | head -n 20 echo "---" doneLength of output: 6531
buildroot-external/configs/generic_x86_64_defconfig (1)
19-19: Kernel version update approved. Verify compatibility and testing.The Linux kernel version has been updated from 6.6.46 to 6.6.52. This change is approved as it likely includes important bug fixes, security patches, and possibly new features or optimizations for the x86_64 architecture.
To ensure system stability and performance, please verify:
- The new kernel version (6.6.52) has been thoroughly tested with the current configuration.
- All existing functionalities remain compatible with this kernel update.
- The change aligns with the project's objectives for the "Prepare 13.2.rc1" pull request.
You can use the following script to check for any known issues or regressions with the new kernel version:
✅ Verification successful
Kernel version update verified.
The Linux kernel version has been updated to 6.6.52. Verification checks for known regressions and security advisories returned no issues.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Check for known issues or regressions with the new kernel version # Test: Search for any reported issues or regressions for kernel 6.6.52 echo "Searching for known issues or regressions for Linux kernel 6.6.52..." curl -s "https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.52" | grep -i "regression" || echo "No regressions found in the changelog." # Test: Verify if there are any security advisories for the new kernel version echo "Checking for security advisories..." curl -s "https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.52" | grep -i "cve" || echo "No CVEs mentioned in the changelog." # Note: This script provides a basic check. A thorough testing process should be conducted in your development environment.Length of output: 574
buildroot-external/configs/ova_defconfig (1)
19-19: LGTM. Verify kernel version consistency.The update of the Linux kernel version from 6.6.46 to 6.6.52 is a positive change, likely including important bug fixes and security patches. This minor version update should improve system stability and security.
To ensure consistency across the configuration, please run the following verification script:
This script will help ensure that:
- The kernel version is consistently updated across all relevant configuration files.
- There are no remaining references to the old kernel version that might cause conflicts.
- The kernel configuration fragments specified in this file exist and are compatible with the new kernel version.
Please review the output of this script and make any necessary adjustments to maintain consistency across the configuration.
✅ Verification successful
Verified: docker/build-push-action version update
The update from v6.6.1 to v6.7.0 for the docker/build-push-action has been reviewed. This minor version update includes bug fixes and minor improvements without introducing breaking changes. No issues were found.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash gh release view v6.7.0 --repo docker/build-push-actionLength of output: 481
buildroot-external/patches/systemd/0004-detect-virt-detect-hyperv-enlightened-qemu-as-qemu-n.patch (3)
24-24: Introduction of 'hyperv' variable enhances virtualization detectionThe addition of the
hypervboolean variable alongsideotherallows for more precise tracking of Hyper-V detection, particularly when dealing with QEMU instances that provide Hyper-V enlightenments.
33-39: Correct handling of Hyper-V CPUID reporting in QEMUThe updated logic properly checks if
v == VIRTUALIZATION_MICROSOFTand sets thehypervflag instead of immediately categorizing the virtualization type as Microsoft. This change improves the detection mechanism by delaying the decision until more reliable methods are checked.
48-56: Improved fallback logic for virtualization type assignmentBy updating the fallback logic to assign
VIRTUALIZATION_MICROSOFTwhenhypervis true and no other virtualization type has been detected, the code accurately reflects the environment where Hyper-V enlightenments are present. This ensures that the virtualization type is set correctly in scenarios where QEMU mimics Hyper-V.
| @@ -1,4 +1,3 @@ | |||
| labgrid==23.0.6 | |||
| pytest==7.2.2 | |||
| labgrid==24.0.1 | |||
There was a problem hiding this comment.
💡 Codebase verification
Compatibility Issue Detected with labgrid 24.0.1 Update
The update to labgrid version 24.0.1 introduces breaking changes, notably the dropping of Python 3.7 support. Please ensure that your project does not rely on Python 3.7 or consider upgrading to a supported Python version to maintain compatibility.
🔗 Analysis chain
Approve labgrid update to 24.0.1
The update of labgrid to version 24.0.1 aligns with the PR objectives. This is a major version update, which might introduce breaking changes.
To ensure compatibility, please run the following script to check for any deprecated or removed features that might affect our tests:
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Check for potential breaking changes in labgrid 24.0.1
# Test: Search for labgrid usage in test files
rg --type python -g 'tests/**/*.py' 'import labgrid' -A 5
# Test: Check release notes or changelog for breaking changes
curl -s https://raw.githubusercontent.com/labgrid-project/labgrid/v24.0.1/CHANGES.rst | grep -A 10 "Breaking changes"
Length of output: 2439
Summary by CodeRabbit
New Features
Bug Fixes
Chores