Blink cameras don't show up

[dgomes]

CC @fronzbot

Home Assistant release with the issue:
dev-branch

Last working Home Assistant release (if known):
N/A

Operating environment (Hass.io/Docker/Windows/etc.):
OS/X dev environment

Component/platform:
blink

Description of problem:
cameras don't show up... only 1 entity: alarm_control_panel.blink_sync

Possibly related to #16942

Problem-relevant configuration.yaml entries and (fill out even if it seems unimportant):

blink:
  username: redacted@gmail.com
  password: redacted

  binary_sensors:
    monitored_conditions:
      - motion_enabled
      - motion_detected
  sensors:
    monitored_conditions:
      - battery
      - temperature
      - status
      - wifi_strength

Traceback (if applicable):

No error

Additional information:

[fronzbot]

Can you change your config to the following and report back?

blink:
    username: something@example.com
    password: yourpassword

[dgomes]

I'm now testing your blinkpy library directly and the cameras also don't show up :(

Better move to an issue there

[fronzbot]

Are you sure your cameras are linked to your sync module?

[dmoses1969]

I have 1 sync module with 3 cameras. Since updating to 0.80, only 2 cameras show up. The camera that is not showing an image is also the battery at -100 and WiFi as unknown. The temperature is displaying within a degree or two of the other cameras. I changed the batteries and removed and re-added the camera and still get the same thing. I cannot find it now but I seen in a log or somewhere in ha, that it failed to get an image url for that camera.

[fronzbot]

Take a look at this and see if it fixes the issue

[dmoses1969]

Take a look at this and see if it fixes the issue

That was it, Thanks.

[fronzbot]

If you are having problems with the Blink platform and are willing to test, please follow the instructions for testing here. I tried to be as detailed as possible.

I'm just CC'ing people I know that have reported issues, in case you want to test.
@tgrecojr @dib0 @haqwin

[dmoses1969]

Followed the instructions suggested in the above post and it's working fine now.

…

On Tue, Oct 16, 2018, 1:03 PM Kevin Fronczak ***@***.***> wrote: If you are having problems with the Blink platform and are willing to test, please follow the instructions for testing here <fronzbot/blinkpy#97 (comment)>. I tried to be as detailed as possible. I'm just CC'ing people I know that have reported issues, in case you want to test. @tgrecojr <https://github.com/tgrecojr> @dib0 <https://github.com/dib0> @haqwin <https://github.com/haqwin> — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#17316 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AJnZz2pAnpjsdklRW2VcraIgJ7-LPVJYks5ulh9dgaJpZM4XWNTZ> .