RFXCom configure device options error expected str

[daveinhull]

The problem

Hi

I'm trying to use the Configure device options to handle 1 device with two entities, one for on and one for off as detsaled in the instructions. I've found the codes, and I try to asdd them in the Configur device options form, but it comes back with an error "Expected str".

Can somne help please?

Thanks
Dave

What version of Home Assistant Core has the issue?

core-2025.1.2

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

No response

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

Anything in the logs that might be useful for us?

Additional information

No response

[mib1185]

as detsaled in the instructions

Which instructions do you referring to? Further about which integration is this report?

[daveinhull]

Hi

It is the RFXCom integration (as mentioned in the title).
In the documentaiton here [https://www.home-assistant.io/integrations/rfxtrx/] it discusses under the section Options for PT-2262 devices under the Lighting4 protocol how to set deal with a Lighting4 protocol where a single deivce creates 2 entites for open and close. I've followed the instructions, but as mentoned in my orgial message, I get an error saysing str expected.

Thanks
Dave

[mib1185]

These Infos would be great to had already at the beginning in the "Integration causing the issue" and "Link to integration documentation on our website" fields 😉
Anyway, please show us the configuration which causes this issue

[home-assistant]

Hey there @Danielhiversen, @elupus, @RobBie1221, mind taking a look at this issue as it has been labeled with an integration (rfxtrx) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of rfxtrx can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign rfxtrx Removes the current integration label and assignees on the issue, add the integration domain after the command.
• @home-assistant add-label needs-more-information Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue.
• @home-assistant remove-label needs-more-information Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.

_{^{(message by CodeOwnersMention)}}

---

rfxtrx documentation
rfxtrx source
_{^{(message by IssueLinks)}}

[elupus]

Lighting devices only expect one code and number of bits that is nit the group. They are really badly supported in general.

[elupus]

Do you have a screenshot of what you are trying to do?

[daveinhull]

Hi,

Sorry for not putting enought info in the OP.
Sequence of events:
Go into RFXOM -> Configure -> Select device to configure -> Submit -> see attached screen shot.
I can change the Off delay fine, no problem.
I think I can change the Data bits value for command on and for command off, but as soon as I put a value in the data_bits field I get the error.

Thanks
Dave

[elupus]

Thanks, will see if i can reproduce.

[elupus]

What datacode for the device are you using?

[daveinhull]

Hi I'm out at the moment. Do you mean the device code that I wanted to change, if so it didn't work with any of the devices. The screen shot shows the data I was trying to enter Thanks Dave

…

On 19 Jan 2025 at 12:11, Joakim Plate ***@***.***> wrote: Thanks, will see if i can reproduce. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>