Add Boundary Devices Nitrogen6X boards

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
hardkernel · Mar 13, 2013 · d67b0d9 · d67b0d9
1 parent 7315e3b
commit d67b0d9
Show file tree

Hide file tree

Showing 24 changed files with 2,338 additions and 0 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1037,6 +1037,14 @@ Pali Rohár <pali.rohar@gmail.com>
 
 	nokia_rx51	ARM ARMV7 (OMAP34xx SoC)
 
+Eric Nelson <eric.nelson@boundarydevices.com>
+	nitrogen6dl		i.MX6DL		1GB
+	nitrogen6dl2g		i.MX6DL		2GB
+	nitrogen6q		i.MX6Q/6D	1GB
+	nitrogen6q2g    	i.MX6Q/6D	2GB
+	nitrogen6s		i.MX6S		512MB
+	nitrogen6s1g		i.MX6S		1GB
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:

diff --git a/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7974
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42720306
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026F0266
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4273030A
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02740240
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45393B3E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x403A3747
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40434541
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x473E4A3B
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0011000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x000E001B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00190015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00070018
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7974
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/6x_bootscript.txt b/board/boundary/nitrogen6x/6x_bootscript.txt
@@ -0,0 +1,63 @@
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+
+if hdmidet ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+	setenv fbmem "fbmem=28M";
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no HDMI monitor";
+fi
+
+i2c dev 2
+if i2c probe 0x04 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbmem "fbmem=10M";
+	else
+		setenv fbmem ${fbmem},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbmem "fbmem=10M";
+	else
+		setenv fbmem ${fbmem},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbmem "fbmem=10M";
+	else
+		setenv fbmem ${fbmem},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 800x480 display";
+fi
+
+while test "3" -ne $nextcon ; do
+	setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+	setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs $fbmem
+setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait"
+
+if test "sata" = "${dtype}" ; then
+	setenv bootargs "$bootargs root=/dev/sda1" ;
+else
+	setenv "bootargs $bootargs root=/dev/mmcblk0p1" ;
+fi
+${fs}load ${dtype} ${disk}:1 10800000 /boot/uImage && bootm 10800000 ;
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_bootscript_android.txt b/board/boundary/nitrogen6x/6x_bootscript_android.txt
@@ -0,0 +1,64 @@
+${dtype} dev ${disk}
+
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ;
+
+i2c dev 2
+
+if i2c probe 0x04 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 800x480 display";
+fi
+
+if hdmidet ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=28M";
+	else
+		setenv fbcon ${fbcon},28M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no HDMI monitor";
+fi
+
+while test "3" -ne $nextcon ; do
+	setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+	setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs fbcon=$fbcon
+${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
@@ -0,0 +1,64 @@
+${dtype} dev ${disk}
+
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ;
+
+i2c dev 2
+
+if i2c probe 0x04 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=10M";
+	else
+		setenv fbcon ${fbcon},10M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no 800x480 display";
+fi
+
+if hdmidet ; then
+	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+	if test "0" -eq $nextcon; then
+		setenv fbcon "fbcon=28M";
+	else
+		setenv fbcon ${fbcon},28M
+	fi
+	setexpr nextcon $nextcon + 1
+else
+	echo "------ no HDMI monitor";
+fi
+
+while test "3" -ne $nextcon ; do
+	setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+	setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs fbcon=$fbcon
+${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt
@@ -0,0 +1,45 @@
+setenv stdout serial,vga
+echo "check U-Boot" ;
+setenv offset 0x400
+if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
+      echo "read $filesize bytes from SD card" ;
+      if sf probe || sf probe || \
+	 sf probe 1 27000000 || sf probe 1 27000000 ; then
+	   echo "probed SPI ROM" ;
+           if sf read 0x12400000 $offset $filesize ; then
+               if cmp.b 0x12000000 0x12400000 $filesize ; then
+                   echo "------- U-Boot versions match" ;
+               else
+                   echo "Need U-Boot upgrade" ;
+                   echo "Program in 5 seconds" ;
+                   for n in 5 4 3 2 1 ; do
+                        echo $n ;
+                        sleep 1 ;
+                   done
+		   echo "erasing" ;
+                   sf erase 0 0x50000 ;
+		   # two steps to prevent bricking
+		   echo "programming" ;
+                   sf write 0x12000000 $offset $filesize ;
+		   echo "verifying" ;
+                   if sf read 0x12400000 $offset $filesize ; then
+                       if cmp.b 0x12000000 0x12400000 $filesize ; then
+                           while echo "---- U-Boot upgraded. reset" ; do
+				sleep 120
+			   done
+                       else
+                           echo "Read verification error" ;
+                       fi
+                   else
+                        echo "Error re-reading EEPROM" ;
+                   fi
+               fi
+           else
+               echo "Error reading boot loader from EEPROM" ;
+           fi
+      else
+           echo "Error initializing EEPROM" ;
+      fi ;
+else
+     echo "No U-Boot image found on SD card" ;
+fi