Switch-OC-Suite 1.9.2

Switch OC Suite 1.9.2 is for Atmosphere 1.6.2

[loader]

Mariko

• added max SoC voltage check for dvb table

Erista

Common

• fixed gpuVoltOffset not initialized

[sys-clk-oc]

(version: oc2)

• added config option for overriding boost mode (both CPU/GPU) : override_boost_mode=1 to override boost mode frequency with user set profile values
• fixed clock manager bug, and fixed safe frequency for erista
• mitigation code that fixes cpu volt bug (pcv cldvfs bug) is added
• minor improvements
• overlay ui is more compact now

Switch-OC-Suite 1.9.1

Switch OC Suite 1.9.1 is for Atmosphere 1.6.2

[Common]
Option for gpu offset has been added. which means now you can also undervolt gpu for erista

[sys-clk-oc]
minor bug for erista cpu/gpu voltage reading is fixed
code for mitigating cpu voltage bug(driver bug) is added

Switch-OC-Suite 1.9.0

Switch OC Suite 1.9.0 is for Atmosphere 1.6.2

[Mariko]

• vddq volt is now set at loader, so doesn't require sys-clk-oc anymore

[sys-clk-oc]
sys-clk-oc has been reworked based on new sys-clk 2.0.0 version.
now it doesn't require Switch-OC-Suite to be installed, and works just like sys-clk
changelog:

• config folder is reverted back to "sys-clk"
• real voltage readings has been added (cpu/gpu/ram)
• global profile
• added option to enable unsafe freq, and remove clock cappings

Switch-OC-Suite 1.8.3

Switch OC Suite 1.8.3 is for Atmosphere 1.5.5

[Mariko]
cpu uv is fixed and now uses correct voltage, allowing higher clocks without performance drop
min cpu volt is patched to 600mV for cpu uv

[Erista]

[Common]
mhz(cpu frequency measurement utility) version 1.1 is now included
(icon from flaticon.com)

Switch-OC-Suite 1.8.2

Switch OC Suite 1.8.2 is for Atmosphere 1.5.5

[Mariko]
fixed some wrong values in MTC table

[Erista]

[Common]
fixed latency and related timings in MTC table. Now should have better performance

Switch-OC-Suite 1.8.1

Switch OC Suite 1.8.1 is for Atmosphere 1.5.5

[Mariko]
fixed some wrong values in MTC table

[Erista]
fixed wrong safe/unsafe max in sys-clk

[Common]
updated for AMS 1.5.5

Switch-OC-Suite 1.8.0

Switch OC Suite 1.8.0 is for Atmosphere 1.5.4

[Mariko]
MTC timing parameters were changed to NVIDIA values
Scaling for additional MTC timing parameters

[Erista]
998 GPU is added (real 998 with pll patched). 998 GPU is not recommended and is only available with unsafe freq.

[Common]

*Hotfix
Erista wrong safe/unsafe max is fixed

Switch-OC-Suite 1.7.0

[Mariko]

• 1267Mhz voltage for hiopt table was slightly adjusted for stability
• gpu voltage customization is added
• now you can configure max mem clock up to 2502Mhz (validator has been lifted up to 2800, so you can hex edit if you want to)
• emc dvb table shift option is added (up to 2 steps)

[Erista]

• dram timing in configurator now shows correctly for erista
• info tab in misc gui has been fixed
• cpu max voltage has been fixed (?)

[Common]

• ini option to enable governor only on handheld(without charging) has been added

Switch-OC-Suite 1.6.3

• timing adjustment for erista was fixed
• new value for preset tRFC was added as requested (tRFC 70) #27
• changed cvb patch to consider lowering of cpu max voltage on erista

Switch-OC-Suite 1.6.2

• problematic 2397 CPU is removed (it is still available in slt table)
• memory voltage range is reverted back (official limits is put in description for reference)
• fixed bug where wrong mariko cpu/gpu dvfs table was being used while patching limits