Update common.c #11

Fauxly · 2020-11-08T19:53:00Z

common.c fixed compilation error

digetx · 2020-11-09T01:02:29Z

What is the compilation error?

Ido Schimmel says: ==================== mlxsw: Introduce initial XM router support This patch set implements initial eXtended Mezzanine (XM) router support. The XM is an external device connected to the Spectrum-{2,3} ASICs using dedicated Ethernet ports. Its purpose is to increase the number of routes that can be offloaded to hardware. This is achieved by having the ASIC act as a cache that refers cache misses to the XM where the FIB is stored and LPM lookup is performed. Future patch sets will add more sophisticated cache flushing and selftests that utilize cache counters on the ASIC, which we plan to expose via devlink-metric [1]. Patch set overview: Patches #1-#2 add registers to insert/remove routes to/from the XM and to enable/disable it. Patch #3 utilizes these registers in order to implement XM-specific router low-level operations. Patches #4-#5 query from firmware the availability of the XM and the local ports that are used to connect the ASIC to the XM, so that netdevs will not be created for them. Patches #6-#8 initialize the XM by configuring its cache parameters. Patch #9-#10 implement cache management, so that LPM lookup will be correctly cached in the ASIC. Patches #11-#13 implement cache flushing, so that routes insertions/removals to/from the XM will flush the affected entries in the cache. Patch #14 configures the ASIC to allocate half of its memory for the cache, so that room will be left for other entries (e.g., FDBs, neighbours). Patch #15 starts using the XM for IPv4 route offload, when available. [1] https://lore.kernel.org/netdev/20200817125059.193242-1-idosch@idosch.org/ ==================== Link: https://lore.kernel.org/r/20201214113041.2789043-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Andrii Nakryiko says: ==================== This patch set adds new libbpf APIs and their bpftool integration that allows to perform static linking of BPF object files. Currently no extern resolution across object files is performed. This is going to be the focus of the follow up patches. But, given amount of code and logic necessary to perform just basic functionality of linking together mostly independent BPF object files, it was decided to land basic BPF linker code and logic first and extend it afterwards. The motivation for BPF static linking is to provide the functionality that is naturally assumed for user-space development process: ability to structure application's code without artificial restrictions of having all the code and data (variables and maps) inside a single source code file. This enables better engineering practices of splitting code into well-encapsulated parts. It provides ability to hide internal state from other parts of the code base through static variables and maps. It is also a first steps towards having generic reusable BPF libraries. Please see individual patches (mostly #6 and #7) for more details. Patch #10 passes all test_progs' individual BPF .o files through BPF static linker, which is supposed to be a no-op operation, so is essentially validating that BPF static linker doesn't produce corrupted ELF object files. Patch #11 adds Makefile infra to be able to specify multi-file BPF object files and adds the first multi-file test to validate correctness. v3->v4: - fix Makefile copy/paste error of diff'ing invalid object files (Alexei); - fix uninitialized obj_name variable that could lead to bogus object names being used during skeleton generation (kernel-patches CI); v2->v3: - added F(F(F(X))) = F(F(X)) test for all linked BPF object files (Alexei); - used reallocarray() more consistently in few places (Alexei); - improved bash completions for `gen object` (Quentin); - dropped .bpfo extension, but had to add optional `name OBJECT_FILE` parameter (path #8) to `gen skeleton` command to specify desired object name during skeleton generation; - fixed bug of merging DATASECS of special "license" and "version" sections. Linker currently strictly validates that all versions and licenses matches exactly and keeps only ELF symbols and BTF DATASEC from the very first object file with license/version. For all other object files, we ignore ELF symbols, but weren't ignoring DATASECs, which caused further problems of not being able to find a corresponding ELF symbol, if variable name differs between two files (which we test deliberately in multi-file linking selftest). The fix is to ignore BTF DATASECS; v1->v2: - extracted `struct strset` to manage unique set of strings both for BTF and ELF SYMTAB (patch #4, refactors btf and btf_dedup logic as well) (Alexei); - fixed bugs in bpftool gen command; renamed it to `gen object`, added BASH completions and extended/updated man page (Quentin). ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done ( inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 [ffffc9000bcf3c08] __schedule at ffffffff818667cc #1 [ffffc9000bcf3ca0] schedule at ffffffff81866de6 #2 [ffffc9000bcf3cb8] inode_dio_wait at ffffffff812a2d04 #3 [ffffc9000bcf3d28] ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 [ffffc9000bcf3e18] notify_change at ffffffff812a5a09 #5 [ffffc9000bcf3e60] do_truncate at ffffffff812808f5 #6 [ffffc9000bcf3ed8] do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 [ffffc9000bcf3f18] sys_ftruncate at ffffffff81280d8e #8 [ffffc9000bcf3f28] do_syscall_64 at ffffffff81003949 #9 [ffffc9000bcf3f50] entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hang at locking inode->i_rwsem. #0 [ffffc90009b47b40] __schedule+700 at ffffffff818667cc #1 [ffffc90009b47bd8] schedule+54 at ffffffff81866de6 #2 [ffffc90009b47bf0] rwsem_down_write_failed+536 at ffffffff8186aa28 #3 [ffffc90009b47c88] call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 [ffffc90009b47cd0] down_write+45 at ffffffff81869c9d #5 [ffffc90009b47ce8] ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 [ffffc90009b47dd8] ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 [ffffc90009b47e18] dio_complete+140 at ffffffff812c873c #8 [ffffc90009b47e50] dio_aio_complete_work+25 at ffffffff812c89f9 #9 [ffffc90009b47e60] process_one_work+361 at ffffffff810b1889 #10 [ffffc90009b47ea8] worker_thread+77 at ffffffff810b233d #11 [ffffc90009b47f08] kthread+261 at ffffffff810b7fd5 #12 [ffffc90009b47f50] ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a. well, it seems that that commit just removed cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock its self. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Ido Schimmel says: ==================== mlxsw: Various updates This patchset contains various updates to the mlxsw driver and related selftests. Patches #1-#5 contain various updates to mlxsw selftests. The most significant change is the conversion of the DCB selftests to use the new iproute2 DCB support. Patches #6-#9 contain mostly trivial changes to the driver itself. No user facing changes. Patches #10-#11 remove support for SwitchX-2 and SwitchIB ASICs that did not see any updates in the last 4-5 years and will not see any in the future. See individual commit messages for detailed explanation as to why it is OK to remove these drivers from the kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

commit ca4463b upstream. The VT_DISALLOCATE ioctl can free a virtual console while tty_release() is still running, causing a use-after-free in con_shutdown(). This occurs because VT_DISALLOCATE considers a virtual console's 'struct vc_data' to be unused as soon as the corresponding tty's refcount hits 0. But actually it may be still being closed. Fix this by making vc_data be reference-counted via the embedded 'struct tty_port'. A newly allocated virtual console has refcount 1. Opening it for the first time increments the refcount to 2. Closing it for the last time decrements the refcount (in tty_operations::cleanup() so that it happens late enough), as does VT_DISALLOCATE. Reproducer: #include <fcntl.h> #include <linux/vt.h> #include <sys/ioctl.h> #include <unistd.h> int main() { if (fork()) { for (;;) close(open("/dev/tty5", O_RDWR)); } else { int fd = open("/dev/tty10", O_RDWR); for (;;) ioctl(fd, VT_DISALLOCATE, 5); } } KASAN report: BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129 CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 grate-driver#11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014 Call Trace: [...] con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789 [...] Allocated by task 129: [...] kzalloc include/linux/slab.h:669 [inline] vc_allocate drivers/tty/vt/vt.c:1085 [inline] vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline] tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline] tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035 [...] Freed by task 130: [...] kfree+0xbf/0x1e0 mm/slab.c:3757 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline] vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660 [...] Fixes: 4001d7b ("vt: push down the tty lock so we can see what is left to tackle") Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: syzbot+522643ab5729b0421998@syzkaller.appspotmail.com Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200322034305.210082-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 18f855e ] Stefano reported a crash with using SQPOLL with io_uring: BUG: kernel NULL pointer dereference, address: 00000000000003b0 CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 grate-driver#11 RIP: 0010:task_numa_work+0x4f/0x2c0 Call Trace: task_work_run+0x68/0xa0 io_sq_thread+0x252/0x3d0 kthread+0xf9/0x130 ret_from_fork+0x35/0x40 which is task_numa_work() oopsing on current->mm being NULL. The task work is queued by task_tick_numa(), which checks if current->mm is NULL at the time of the call. But this state isn't necessarily persistent, if the kthread is using use_mm() to temporarily adopt the mm of a task. Change the task_tick_numa() check to exclude kernel threads in general, as it doesn't make sense to attempt ot balance for kthreads anyway. Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk Signed-off-by: Sasha Levin <sashal@kernel.org>

ASan reports a memory leak caused by evlist not being deleted on exit in perf-report, perf-script and perf-data. The problem is caused by evlist->session not being deleted, which is allocated in perf_session__read_header, called in perf_session__new if perf_data is in read mode. In case of write mode, the session->evlist is filled by the caller. This patch solves the problem by calling evlist__delete in perf_session__delete if perf_data is in read mode. Changes in v2: - call evlist__delete from within perf_session__delete v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/ ASan report follows: $ ./perf script report flamegraph ================================================================= ==227640==ERROR: LeakSanitizer: detected memory leaks <SNIP unrelated> Indirect leak of 2704 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26 #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 568 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24 #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9 #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 264 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23 #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21 #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137) #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9 #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14 #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7 #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) Indirect leak of 7 byte(s) in 1 object(s) allocated from: #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207) #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16 #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3 #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9 #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9 #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2 #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6 #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10 #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12 #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3 #13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74) SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Fabian Hemmer <copy@copy.sh> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 grate-driver#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED grate-driver#11 touch_atime at ffffffffa4cf0000 grate-driver#12 generic_file_read_iter at ffffffffa4c1f123 grate-driver#13 new_sync_read at ffffffffa4ccdc8a grate-driver#14 vfs_read at ffffffffa4cd0849 grate-driver#15 ksys_read at ffffffffa4cd0bd1 grate-driver#16 do_syscall_64 at ffffffffa4a052eb grate-driver#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f grate-driver#10 __extent_writepage at ffffffffc03a4c01 grate-driver#11 extent_write_cache_pages at ffffffffc03a500b grate-driver#12 extent_writepages at ffffffffc03a6de2 grate-driver#13 do_writepages at ffffffffa4c277eb grate-driver#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb grate-driver#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes grate-driver#16 normal_work_helper at ffffffffc03b706c grate-driver#17 process_one_work at ffffffffa4aba4e4 grate-driver#18 worker_thread at ffffffffa4aba6fd grate-driver#19 kthread at ffffffffa4ac0a3d grate-driver#20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 67069a1 upstream. ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 grate-driver#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 grate-driver#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41d5854 upstream. I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 grate-driver#10 0x559bce519bea in __perf_session__process_events util/session.c:2268 grate-driver#11 0x559bce519bea in perf_session__process_events util/session.c:2297 grate-driver#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 grate-driver#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 grate-driver#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 grate-driver#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 grate-driver#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 grate-driver#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 grate-driver#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 grate-driver#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 grate-driver#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 grate-driver#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 grate-driver#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 grate-driver#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 grate-driver#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 grate-driver#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 grate-driver#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 grate-driver#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 grate-driver#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 grate-driver#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There is a kernel panic caused by pcpu_alloc_pages() passing offlined and uninitialized node to alloc_pages_node() leading to panic by NULL dereferencing uninitialized NODE_DATA(nid). CPU2 has been hot-added BUG: unable to handle page fault for address: 0000000000001608 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: systemd Tainted: G E 5.15.0-rc7+ #11 Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW RIP: 0010:__alloc_pages+0x127/0x290 Code: 4c 89 f0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 e0 48 8b 55 b8 c1 e8 0c 83 e0 01 88 45 d0 4c 89 c8 48 85 d2 0f 85 1a 01 00 00 <45> 3b 41 08 0f 82 10 01 00 00 48 89 45 c0 48 8b 00 44 89 e2 81 e2 RSP: 0018:ffffc900006f3bc8 EFLAGS: 00010246 RAX: 0000000000001600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000cc2 RBP: ffffc900006f3c18 R08: 0000000000000001 R09: 0000000000001600 R10: ffffc900006f3a40 R11: ffff88813c9fffe8 R12: 0000000000000cc2 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000cc2 FS: 00007f27ead70500(0000) GS:ffff88807ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001608 CR3: 000000000582c003 CR4: 00000000001706b0 Call Trace: pcpu_alloc_pages.constprop.0+0xe4/0x1c0 pcpu_populate_chunk+0x33/0xb0 pcpu_alloc+0x4d3/0x6f0 __alloc_percpu_gfp+0xd/0x10 alloc_mem_cgroup_per_node_info+0x54/0xb0 mem_cgroup_alloc+0xed/0x2f0 mem_cgroup_css_alloc+0x33/0x2f0 css_create+0x3a/0x1f0 cgroup_apply_control_enable+0x12b/0x150 cgroup_mkdir+0xdd/0x110 kernfs_iop_mkdir+0x4f/0x80 vfs_mkdir+0x178/0x230 do_mkdirat+0xfd/0x120 __x64_sys_mkdir+0x47/0x70 ? syscall_exit_to_user_mode+0x21/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Panic can be easily reproduced by disabling udev rule for automatic onlining hot added CPU followed by CPU with memoryless node (NUMA node with CPU only) hot add. Hot adding CPU and memoryless node does not bring the node to online state. Memoryless node will be onlined only during the onlining its CPU. Node can be in one of the following states: 1. not present.(nid == NUMA_NO_NODE) 2. present, but offline (nid > NUMA_NO_NODE, node_online(nid) == 0, NODE_DATA(nid) == NULL) 3. present and online (nid > NUMA_NO_NODE, node_online(nid) > 0, NODE_DATA(nid) != NULL) Percpu code is doing allocations for all possible CPUs. The issue happens when it serves hot added but not yet onlined CPU when its node is in 2nd state. This node is not ready to use, fallback to numa_mem_id(). Link: https://lkml.kernel.org/r/20211108202325.20304-1-amakhalov@vmware.com Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Per HiFive Unleashed schematics, the card detect signal of the micro SD card is connected to gpio pin #11, which should be reflected in the DT via the <gpios> property, as described in Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt. [1] https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf Signed-off-by: Bin Meng <bin.meng@windriver.com> Fixes: d573b55 ("riscv: dts: add initial board data for the SiFive HiFive Unmatched") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

There is a kernel panic caused by pcpu_alloc_pages() passing offlined and uninitialized node to alloc_pages_node() leading to panic by NULL dereferencing uninitialized NODE_DATA(nid). CPU2 has been hot-added BUG: unable to handle page fault for address: 0000000000001608 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: systemd Tainted: G E 5.15.0-rc7+ #11 Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW RIP: 0010:__alloc_pages+0x127/0x290 Code: 4c 89 f0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 e0 48 8b 55 b8 c1 e8 0c 83 e0 01 88 45 d0 4c 89 c8 48 85 d2 0f 85 1a 01 00 00 <45> 3b 41 08 0f 82 10 01 00 00 48 89 45 c0 48 8b 00 44 89 e2 81 e2 RSP: 0018:ffffc900006f3bc8 EFLAGS: 00010246 RAX: 0000000000001600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000cc2 RBP: ffffc900006f3c18 R08: 0000000000000001 R09: 0000000000001600 R10: ffffc900006f3a40 R11: ffff88813c9fffe8 R12: 0000000000000cc2 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000cc2 FS: 00007f27ead70500(0000) GS:ffff88807ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001608 CR3: 000000000582c003 CR4: 00000000001706b0 Call Trace: pcpu_alloc_pages.constprop.0+0xe4/0x1c0 pcpu_populate_chunk+0x33/0xb0 pcpu_alloc+0x4d3/0x6f0 __alloc_percpu_gfp+0xd/0x10 alloc_mem_cgroup_per_node_info+0x54/0xb0 mem_cgroup_alloc+0xed/0x2f0 mem_cgroup_css_alloc+0x33/0x2f0 css_create+0x3a/0x1f0 cgroup_apply_control_enable+0x12b/0x150 cgroup_mkdir+0xdd/0x110 kernfs_iop_mkdir+0x4f/0x80 vfs_mkdir+0x178/0x230 do_mkdirat+0xfd/0x120 __x64_sys_mkdir+0x47/0x70 ? syscall_exit_to_user_mode+0x21/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Panic can be easily reproduced by disabling udev rule for automatic onlining hot added CPU followed by CPU with memoryless node (NUMA node with CPU only) hot add. Hot adding CPU and memoryless node does not bring the node to online state. Memoryless node will be onlined only during the onlining its CPU. Node can be in one of the following states: 1. not present.(nid == NUMA_NO_NODE) 2. present, but offline (nid > NUMA_NO_NODE, node_online(nid) == 0, NODE_DATA(nid) == NULL) 3. present and online (nid > NUMA_NO_NODE, node_online(nid) > 0, NODE_DATA(nid) != NULL) Percpu code is doing allocations for all possible CPUs. The issue happens when it serves hot added but not yet onlined CPU when its node is in 2nd state. This node is not ready to use, fallback to numa_mem_id(). Link: https://lkml.kernel.org/r/20211108202325.20304-1-amakhalov@vmware.com Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

If the key is already present then free the key used for lookup. Found with: $ perf stat -M IO_Read_BW /bin/true ==1749112==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 4 object(s) allocated from: #0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343 #2 0x55acecd9d9c5 in process_counter_values util/stat.c:365 #3 0x55acecd9e0ab in process_counter_maps util/stat.c:421 #4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443 #5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470 #6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023 #7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048 #8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555 #9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313 #10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365 #11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409 #12 0x55acecc070aa in main ./tools/perf/perf.c:539 Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-24-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit fcee5ce ] When firmware load failed, kernel report task hung as follows: INFO: task xrun:5191 blocked for more than 147 seconds. Tainted: G W 5.16.0-rc5-next-20211220+ grate-driver#11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004 Call Trace: __schedule+0xc12/0x4b50 kernel/sched/core.c:4986 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1) schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221 spi_remove+0x72/0xb0 drivers/spi/spi.c:409 lattice_ecp3_remove() wait for signals from firmware loading, but when load failed, firmware_load() does not send this signal. This cause device remove hung. Fix it by sending signal even if load failed. Fixes: 781551d ("misc: Add Lattice ECP3 FPGA configuration via SPI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

There is a kernel panic caused by pcpu_alloc_pages() passing offlined and uninitialized node to alloc_pages_node() leading to panic by NULL dereferencing uninitialized NODE_DATA(nid). CPU2 has been hot-added BUG: unable to handle page fault for address: 0000000000001608 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: systemd Tainted: G E 5.15.0-rc7+ grate-driver#11 Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW RIP: 0010:__alloc_pages+0x127/0x290 Code: 4c 89 f0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 e0 48 8b 55 b8 c1 e8 0c 83 e0 01 88 45 d0 4c 89 c8 48 85 d2 0f 85 1a 01 00 00 <45> 3b 41 08 0f 82 10 01 00 00 48 89 45 c0 48 8b 00 44 89 e2 81 e2 RSP: 0018:ffffc900006f3bc8 EFLAGS: 00010246 RAX: 0000000000001600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000cc2 RBP: ffffc900006f3c18 R08: 0000000000000001 R09: 0000000000001600 R10: ffffc900006f3a40 R11: ffff88813c9fffe8 R12: 0000000000000cc2 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000cc2 FS: 00007f27ead70500(0000) GS:ffff88807ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001608 CR3: 000000000582c003 CR4: 00000000001706b0 Call Trace: pcpu_alloc_pages.constprop.0+0xe4/0x1c0 pcpu_populate_chunk+0x33/0xb0 pcpu_alloc+0x4d3/0x6f0 __alloc_percpu_gfp+0xd/0x10 alloc_mem_cgroup_per_node_info+0x54/0xb0 mem_cgroup_alloc+0xed/0x2f0 mem_cgroup_css_alloc+0x33/0x2f0 css_create+0x3a/0x1f0 cgroup_apply_control_enable+0x12b/0x150 cgroup_mkdir+0xdd/0x110 kernfs_iop_mkdir+0x4f/0x80 vfs_mkdir+0x178/0x230 do_mkdirat+0xfd/0x120 __x64_sys_mkdir+0x47/0x70 ? syscall_exit_to_user_mode+0x21/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Panic can be easily reproduced by disabling udev rule for automatic onlining hot added CPU followed by CPU with memoryless node (NUMA node with CPU only) hot add. Hot adding CPU and memoryless node does not bring the node to online state. Memoryless node will be onlined only during the onlining its CPU. Node can be in one of the following states: 1. not present.(nid == NUMA_NO_NODE) 2. present, but offline (nid > NUMA_NO_NODE, node_online(nid) == 0, NODE_DATA(nid) == NULL) 3. present and online (nid > NUMA_NO_NODE, node_online(nid) > 0, NODE_DATA(nid) != NULL) Percpu code is doing allocations for all possible CPUs. The issue happens when it serves hot added but not yet onlined CPU when its node is in 2nd state. This node is not ready to use, fallback to numa_mem_id(). Link: https://lkml.kernel.org/r/20211108202325.20304-1-amakhalov@vmware.com Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 grate-driver#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 grate-driver#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 grate-driver#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 grate-driver#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 grate-driver#14 0x556701d3be90 in run_argv tools/perf/perf.c:421 grate-driver#15 0x556701d3c3f8 in main tools/perf/perf.c:537 grate-driver#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 grate-driver#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 grate-driver#11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 grate-driver#10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 grate-driver#11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 grate-driver#12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 grate-driver#10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 grate-driver#11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 grate-driver#12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 grate-driver#13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 grate-driver#14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 grate-driver#15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 864fb5d upstream. [ 8743.393379] ====================================================== [ 8743.393385] WARNING: possible circular locking dependency detected [ 8743.393391] 6.4.0-rc1+ grate-driver#11 Tainted: G OE [ 8743.393397] ------------------------------------------------------ [ 8743.393402] kworker/0:2/12921 is trying to acquire lock: [ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393510] but task is already holding lock: [ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd] [ 8743.393618] which lock already depends on the new lock. [ 8743.393623] the existing dependency chain (in reverse order) is: [ 8743.393628] -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}: [ 8743.393648] down_write_nested+0x9a/0x1b0 [ 8743.393660] filename_create+0x128/0x270 [ 8743.393670] do_mkdirat+0xab/0x1f0 [ 8743.393680] __x64_sys_mkdir+0x47/0x60 [ 8743.393690] do_syscall_64+0x5d/0x90 [ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 8743.393711] -> #0 (sb_writers#8){.+.+}-{0:0}: [ 8743.393728] __lock_acquire+0x2201/0x3b80 [ 8743.393737] lock_acquire+0x18f/0x440 [ 8743.393746] mnt_want_write+0x5f/0x240 [ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd] [ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd] [ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd] [ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd] [ 8743.394187] process_one_work+0x65a/0xb30 [ 8743.394198] worker_thread+0x2cf/0x700 [ 8743.394209] kthread+0x1ad/0x1f0 [ 8743.394218] ret_from_fork+0x29/0x50 This patch add mnt_want_write() above parent inode lock and remove nested mnt_want_write calls in smb2_open(). Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Cc: stable@vger.kernel.org Reported-by: Marios Makassikis <mmakassikis@freebox.fr> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] grate-driver#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] grate-driver#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] grate-driver#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb grate-driver#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 grate-driver#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 grate-driver#15 [ffff88aa841efb88] device_del at ffffffff82179d23 grate-driver#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] grate-driver#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] grate-driver#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a grate-driver#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff grate-driver#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 grate-driver#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Update common.c

ed8821d

common.c fixed compilation error

Fauxly closed this Nov 8, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Update common.c #11

Update common.c #11

Uh oh!

Fauxly commented Nov 8, 2020

Uh oh!

digetx commented Nov 9, 2020

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Update common.c #11

Update common.c #11

Uh oh!

Conversation

Fauxly commented Nov 8, 2020

Uh oh!

digetx commented Nov 9, 2020

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants