ESP-IDF Visual Studio Code Extension

Develop, build, flash, monitor, debug and more with Espressif chips using Espressif IoT Development Framework (ESP-IDF)

Nightly builds for Visual Studio Code. You can use this VSIX to test the current github master of the extension by pressing F1 or click menu View -> Command Palette..., type Install from VSIX and then select the previously downloaded .vsix file to install the extension.

Make sure to review our documentation first to properly use the extension.

Tutorials

1. Install and setup the extension.
2. Create a project from ESP-IDF examples, Build, flash and monitor.
3. Debugging with steps to configure OpenOCD and debug adapter.
4. Heap tracing
5. Code coverage
6. Developing on Docker Container
7. Developing on WSL

Check all the tutorials here.

Table of content

• ESP-IDF Visual Studio Code Extension
• Tutorials
• Table of content
• How to use
• Available commands
• About commands
• Commands for tasks.json and launch.json
• Available Tasks in tasks.json
• Troubleshooting
• Code of Conduct
• License

Check all the documentation.

How to use

• Download and install Visual Studio Code.
• Then
  • Either open Visual Studio Code and create a workspace folder.
  • Run code ${YOUR_PROJECT_DIR} from a command line terminal.
• Install this extension in your Visual Studio Code.

There are few dependencies required in your system and available in environment variable PATH before installing this extension. Please review the following documentation.

• Requirements for Linux
• Requirements for MacOS
• For Windows the C++ Build Tools might be required.

Installation of ESP-IDF and ESP-IDF Tools is being done from this extension itself (existing ESP-IDF installation may also be reused) using the ESP-IDF: Configure ESP-IDF Extension setup wizard or following the steps in the setup documentation or following the install tutorial.

NOTE: Please note that this extension only supports the release versions of ESP-IDF, you can still use the extension on master branch or some other branch, but certain feature might not properly work.

NOTE: If you are using Windows Subsystem for Linux (WSL) 2, please take a look at the WSL tutorial for an step by step instruction or check the requirements in WSL Documentation needed in the WSL distribution.

• (OPTIONAL) Press F1 and type ESP-IDF: Select where to Save Configuration Settings, which can be User settings, Workspace settings or workspace folder settings.

  NOTE: Please take a look at Working with multiple projects for more information. Default is User settings.

• On the first time using the extension, press F1 to show the Visual Studio Code Command Palette and type ESP-IDF: Configure ESP-IDF Extension to open the extension configuration wizard. This will install ESP-IDF, ESP-IDF tools, create a virtual python environment with ESP-IDF and this extension python packages and configure the extension settings with these values. NOTE: Make sure that there is no spaces in any configured path since ESP-IDF build system doesn't support spaces yet..

  NOTE: Please take a look at Install tutorial documentation or the Setup documentation for details about extension setup and configuration.

• Press F1 and type ESP-IDF: Show Examples Projects to create a new project from ESP-IDF examples.

• Configure the .vscode/c_cpp_properties.json as explained in C/C++ Configuration. There is a default configuration that should work when you create a new project with the extension commands but you might want to modify it to your needs.

  Note: If you want to get code navigation and ESP-IDF function references, the Microsoft C/C++ Extension can be used to resolve header/source links. By default, projects created with ESP-IDF: Create Project from Extension Template or ESP-IDF: Show Examples Projects tries to resolve headers by manually recursing ESP-IDF directory sources with the Tag Parser engine. This can be optimized by building the project first and configure your project to use build/compile_commands.json as explained in C/C++ Configuration.

  NOTE: You should set "C_Cpp.intelliSenseEngine": "Tag Parser" in your settings.json if you are not using the compile_commands.json approach.

• Do some coding!

• Check you set the correct port of your device by pressing F1, typing ESP-IDF: Select Port to Use: and choosing the serial port your device is connected.

• Select an Espressif target (esp32, esp32s2, etc.) with the ESP-IDF: Set Espressif Device Target command.

• Use the ESP-IDF: Select OpenOCD Board Configuration to choose the openOCD configuration files for the extension openOCD server.

• When you are ready, build your project by pressing F1 and typing ESP-IDF: Build your Project.

• Flash to your device by pressing F1 and typing ESP-IDF: Select Flash Method and Flash to select either UART or JTAG. You can also use the ESP-IDF: Flash (UART) your Project or ESP-IDF: Flash (with JTag) directly.

  NOTE: When using the ESP-IDF: Select Flash Method and Flash command, your choice will be saved in the idf.flashType configuration setting in the current workspace folder's settings.json.

• You can later start a monitor by pressing F1 and typing ESP-IDF: Monitor your Device which will log the device activity in a Visual Studio Code terminal.

• To make sure you can debug your device, select the your board by pressing F1 and typing ESP-IDF: Select OpenOCD Board Configuration or manually define the openOCD configuration files with idf.openOcdConfigs configuration in your settings.json.

• If you want to start a debug session, just press F5 (make sure you had at least build and flash once before so the debugger works correctly). Check the Troubleshooting section if you have any issues.

Available commands

Click F1 to show Visual studio code actions, then type ESP-IDF to see possible actions.

Command Description	Keyboard Shortcuts (Mac)	Keyboard Shortcuts (Windows/ Linux)
Add Arduino ESP32 as ESP-IDF Component
Add Docker Container Configuration
Add Editor coverage
Add OpenOCD rules file (For Linux users)
Add vscode configuration folder
Build, Flash and start a monitor on your device	⌘ I D	Ctrl E D
Build your project	⌘ I B	Ctrl E B
Clear eFuse Summary
Clear ESP-IDF Search Results
Clear Saved ESP-IDF Setups
Configure ESP-IDF extension
Configure Paths
Configure Project SDKConfig for Coverage
Create project from Extension Template	⌘ I C	Ctrl E C
Create New ESP-IDF Component
Device configuration
Dispose Current SDK Configuration Editor Server Process
Doctor Command
Encrypt and Flash your Project
Erase Flash Memory from Device	⌘ I R	Ctrl E R
Execute Custom Task	⌘ I J	Ctrl E J
Flash your project	⌘ I F	Ctrl E F
Flash (DFU) your project
Flash (UART) your project
Flash (with JTag)
Full Clean Project	⌘ I X	Ctrl E X
Get eFuse Summary
Get HTML Coverage Report for project
Import ESP-IDF Project
Install ESP-ADF
Install ESP-IDF Python Packages
Install ESP-MDF
Install ESP-Matter
Install ESP-Rainmaker
Launch IDF Monitor for CoreDump / GDB-Stub Mode
Launch QEMU Server
Launch QEMU Debug Session
Monitor your device	⌘ I M	Ctrl E M
Monitor QEMU Device
New Project	⌘ I N	Ctrl E N
Open ESP-IDF Terminal	⌘ I T	Ctrl E T
Open NVS Partition Editor
Pick a workspace folder
Remove Editor coverage
Save Default SDKCONFIG file (save-defconfig)
SDK Configuration editor	⌘ I G	Ctrl E G
Search in documentation...	⌘ I Q	Ctrl E Q
Select Flash Method
Select port to use	⌘ I P	Ctrl E P
Select OpenOCD Board Configuration
Select where to save configuration settings
Select output and notification mode
Set default sdkconfig file in project
Set Espressif device target
Set ESP-MATTER Device Path (ESP_MATTER_DEVICE_PATH)
Show Examples Projects
Show Ninja Build Summary
Size analysis of the binaries	⌘ I S	Ctrl E S
Unit Test: Build and flash unit test app for testing
Unit Test: Install ESP-IDF PyTest requirements
Remove Editor coverage
Run ESP-IDF-SBOM vulnerability check

About commands

1. The Add Arduino-ESP32 as ESP-IDF Component command will add Arduino-ESP32 as a ESP-IDF component in your current directory (${CURRENT_DIRECTORY}/components/arduino).

   NOTE: Not all versions of ESP-IDF are supported. Make sure to check Arduino-ESP32 to see if your ESP-IDF version is compatible.

2. You can also use the ESP-IDF: Create Project from Extension Template command with arduino-as-component template to create a new project directory that includes Arduino-ESP32 as an ESP-IDF component.

3. The Install ESP-ADF will clone ESP-ADF inside the selected directory and set idf.espAdfPath (idf.espAdfPathWin in Windows) configuration setting.

4. The Install ESP-Matter will clone ESP-Matter inside the selected directory and set idf.espMatterPath configuration setting. The ESP-IDF: Set ESP-MATTER Device Path (ESP_MATTER_DEVICE_PATH) is used to define the device path for ESP-Matter. ESP-Matter is not supported in Windows.

5. The Install ESP-MDF will clone ESP-MDF inside the selected directory and set idf.espMdfPath (idf.espMdfPathWin in Windows) configuration setting.

6. The Show Examples Projects command allows you create a new project using one of the examples in ESP-IDF, ESP-ADF, ESP-Matter or ESP-MDF directory if related configuration settings are correctly defined.

Commands for tasks.json and launch.json

We have implemented some utilities commands that can be used in tasks.json and launch.json that can be used like:

"miDebuggerPath": "${command:espIdf.getXtensaGdb}"

• espIdf.getExtensionPath: Get the installed location absolute path.
• espIdf.getOpenOcdScriptValue: Return the value of OPENOCD_SCRIPTS from idf.customExtraVars or from system OPENOCD_SCRIPTS environment variable.
• espIdf.getOpenOcdConfig: Return the openOCD configuration files as string. Example -f interface/ftdi/esp32_devkitj_v1.cfg -f board/esp32-wrover.cfg.
• espIdf.getProjectName: Return the project name from current workspace folder build/project_description.json.
• espIdf.getXtensaGcc: Return the absolute path of the toolchain gcc for the ESP-IDF target given by idf.adapterTargetName configuration setting and idf.customExtraPaths.
• espIdf.getXtensaGdb: Return the absolute path of the toolchain gdb for the ESP-IDF target given by idf.adapterTargetName configuration setting and idf.customExtraPaths.

See an example in the debugging documentation.

Available Tasks in tasks.json

A template Tasks.json is included when creating a project using ESP-IDF: Create Project from Extension Template. These tasks can be executed by running F1, writing Tasks: Run task and selecting one of the following:

1. Build - Build Project
2. Set Target to esp32
3. Set Target to esp32s2
4. Clean - Clean the project
5. Flash - Flash the device
6. Monitor - Start a monitor terminal
7. OpenOCD - Start the openOCD server
8. BuildFlash - Execute a build followed by a flash command.

Note that for OpenOCD tasks you need to define OPENOCD_SCRIPTS in your system environment variables with openocd scripts folder path.

Troubleshooting

If something is not working please check for any error on one of these:

NOTE: Use idf.openOcdDebugLevel configuration setting to 3 or more to show debug logging in OpenOCD server output.

NOTE: Use logLevel in your /.vscode/launch.json to 3 or more to show more debug adapter output.

1. In Visual Studio Code select menu View -> Output -> ESP-IDF. This output information is useful to know what is happening in the extension.
2. In Visual Studio Code select menu View then click Command Palette... and type ESP-IDF: Doctor Command to generate a report of your environment configuration and it will be copied in your clipboard to paste anywhere.
3. Check log file which can be obtained from:

• Windows: %USERPROFILE%\.vscode\extensions\espressif.esp-idf-extension-VERSION\esp_idf_vsc_ext.log
• Linux & MacOSX: $HOME/.vscode/extensions/espressif.esp-idf-extension-VERSION/esp_idf_vsc_ext.log

4. In Visual Studio Code, select menu Help -> Toggle Developer Tools and copy any error in the Console tab related to this extension.

5. Make sure that your extension is properly configured as described in JSON Manual Configuration. Visual Studio Code allows the user to configure settings at different levels: Global (User Settings), Workspace and Workspace Folder so make sure your project has the right settings. The ESP-IDF: Doctor command result might give the values from user settings instead of the workspace folder settings.

6. Review the OpenOCD troubleshooting FAQ related to the OpenOCD output, for application tracing, debug or any OpenOCD related issues.

If there is any Python package error, please try to reinstall the required python packages with the ESP-IDF: Install ESP-IDF Python Packages command. Please consider that this extension install ESP-IDF, this extension's and ESP-IDF Debug Adapter python packages when running the ESP-IDF: Configure ESP-IDF Extension setup wizard.

If the user can't resolve the error, please search in the github repository issues for existing errors or open a new issue here.

Code of Conduct

This project and everyone participating in it is governed by the Code of Conduct. By participating, you are expected to uphold this code. Please report unacceptable behavior to vscode@espressif.com.

License

This extension is licensed under the Apache License 2.0. Please see the LICENSE file for additional copyright notices and terms.