Closed
Description
Board
Olimex ESP32-EVB rev. I
Device Description
Olimex ESP32-EVB rev. I
Hardware Configuration
No
Version
v2.0.3
IDE Name
PlatformIO
Operating System
Windows 10
Flash frequency
40
PSRAM enabled
no
Upload speed
460800
Description
I am trying to read some Wiegand card using the Bosch ARD-AYK12 - RFID Proximity Reader, and the following library: https://github.com/jvondrus/Wiegand26 ,but it doesn't work.
Do I need to use level shifters ?
Sketch
/*
* Wiegand26 - https://github.com/jvondrus/Wiegand26
* by Jiri Vondrus (https://github.com/jvondrus)
* Version 1.1.0 06-2020
*/
#include <Arduino.h>
#include <Wiegand26.h> // Wiegand RFID
// Status report defines
#define INICIALIZE 0
#define DATA_SENDED 1
#define CONNECTION 2
#define LOGIC_FAULT 3
#define RCV_TIMEOUT 4
#define BITS_FAULTS 5
#define PARITY_FRST 6
#define PARITY_SCND 7
// Inicialize Wiegand26
Wiegand26 wiegand;
#define wiegandD0 14 // Pin for Data 0
#define wiegandD1 13 // Pin for Data 1
// Function for reading Wiegand data
void wiegandPinChanged()
{
wiegand.readData();
}
// Print received Wiegand state
void wiegandState(uint8_t state)
{
if (bitRead(state, INICIALIZE))
{
Serial.println("Wiegand26 - Inicialized");
}
if (bitRead(state, DATA_SENDED))
{
Serial.println("Wiegand26 - Data sended");
}
if (bitRead(state, CONNECTION))
{
Serial.println("Wiegand26 - Disconnected");
}
if (bitRead(state, LOGIC_FAULT))
{
Serial.println("Wiegand26 - Wiring problem");
}
if (bitRead(state, RCV_TIMEOUT))
{
Serial.println("Wiegand26 - Time Out");
}
if (bitRead(state, BITS_FAULTS))
{
Serial.println("Wiegand26 - Buffer size fault");
}
if (bitRead(state, PARITY_FRST))
{
Serial.println("Wiegand26 - First parity fault");
}
if (bitRead(state, PARITY_SCND))
{
Serial.println("Wiegand26 - Second parity fault");
}
}
// Print received Wiegand key
void wiegandKey(uint8_t value)
{
Serial.print("Wiegand26 - Key: 0x");
Serial.println(value, HEX);
Serial.print("Wiegand26 - Key: 0b");
Serial.println(value, BIN);
Serial.print("Wiegand26 - Key: ");
Serial.println(value, DEC);
Serial.println();
}
// Print received Wiegand code
void wiegandCode(unsigned long value)
{
Serial.print("Wiegand26 - Code: 0x");
Serial.println(value, HEX);
Serial.print("Wiegand26 - Code: 0b");
Serial.println(value, BIN);
Serial.print("Wiegand26 - Code: ");
Serial.println(value, DEC);
Serial.println();
}
// Print received Wiegand data
void wiegandData(unsigned long value)
{
Serial.print("Wiegand26 - Data: 0x");
Serial.println(value, HEX);
Serial.print("Wiegand26 - Data: 0b");
Serial.println(value, BIN);
Serial.print("Wiegand26 - Data: ");
Serial.println(value, DEC);
Serial.println();
}
// Setup
void setup()
{
// Serial line
Serial.begin(115200, SERIAL_8N1);
Serial.setTimeout(15);
delay(1000);
// Wiegand RFID
wiegand.onKey(wiegandKey);
wiegand.onCode(wiegandCode);
wiegand.onData(wiegandData);
wiegand.onState(wiegandState);
wiegand.begin(wiegandD0, wiegandD1, true, false);
// Data0 Data1 false == Send state only on change
// true == Send state on each data reading
// false == non-swap data (125kH readers)
// true == swap data (some 13.56MHz readers)
// Interrupt for Wiegand data pin
attachInterrupt(digitalPinToInterrupt(wiegandD0), wiegandPinChanged, FALLING);
attachInterrupt(digitalPinToInterrupt(wiegandD1), wiegandPinChanged, FALLING);
}
// Main loop
void loop()
{
// Manually invoke Wiegand state
// wiegand.readState ();
delay(250);
}Debug Message
rst:0x1 (POWERON_RESET),boot:0x1b (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:12784
load:0x40080400,len:3032
entry 0x400805e4
[��mum����2-hal-cpu.c:214] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
Wiegand26 - Inicialized
Wiegand26 - Data: 0xE28244
Wiegand26 - Data: 0b111000101000001001000100
Wiegand26 - Data: 14844484
Wiegand26 - Inicialized
WieGuru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x4008c8c8 PS : 0x00060d35 A0 : 0x8008bb1a A1 : 0x3ffbec2c
A2 : 0x3ffb9068 A3 : 0x3ffc68c8 A4 : 0x00000004 A5 : 0x00060d23
A6 : 0x00060d23 A7 : 0x00000001 A8 : 0x3ffc68c8 A9 : 0x00000019
A10 : 0x3ffc68c8 A11 : 0x00000019 A12 : 0x3ffc380c A13 : 0x00060d23
A14 : 0x007beeb8 A15 : 0x003fffff SAR : 0x00000009 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4008841d LEND : 0x4008842d LCOUNT : 0xfffffff9
Core 1 was running in ISR context:
EPC1 : 0x400e842b EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace:0x4008c8c5:0x3ffbec2c |<-CORRUPTED
#0 0x4008c8c5:0x3ffbec2c in vListInsert at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/list.c:166 (discriminator 1)
Core 0 register dump:
PC : 0x4008ca49 PS : 0x00060035 A0 : 0x8008b743 A1 : 0x3ffbe80c
A2 : 0x3ffbeeb8 A3 : 0xb33fffff A4 : 0x0000abab A5 : 0x00060023
A6 : 0x00060021 A7 : 0x0000cdcd A8 : 0x0000abab A9 : 0xffffffff
A10 : 0x00000000 A11 : 0x00000000 A12 : 0x3ffc28d8 A13 : 0x00000007
A14 : 0x007beeb8 A15 : 0x003fffff SAR : 0x0000001a EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Backtrace:0x4008ca46:0x3ffbe80c |<-CORRUPTED
#0 0x4008ca46:0x3ffbe80c in compare_and_set_native at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_hw_support/include/soc/compare_set.h:25
(inlined by) spinlock_acquire at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_hw_support/include/soc/spinlock.h:103
(inlined by) xPortEnterCriticalTimeout at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port/xtensa/port.c:288
ELF file SHA256: 0000000000000000
Rebooting...
### Other Steps to Reproduce
_No response_
### I have checked existing issues, online documentation and the Troubleshooting Guide
- [X] I confirm I have checked existing issues, online documentation and Troubleshooting guide.
Metadata
Metadata
Assignees
Labels
Type
Projects
Status
Done