Description
I'm on macOS 11.0.1. My Arduino IDE is installed in /Applications, my Arduino sketchbook path is /Volumes/Daten/myuser/Documents/Programmierung/Arduino. I added the ESP8266 support via board manager.
After unpacking the ZIP from https://github.com/esp8266/arduino-esp8266fs-plugin/releases/tag/0.3.0 to /Volumes/Daten/myuser/Documents/Programmierung/Arduino/tools/ and restarting the IDE the menu item ESP8266 Sketch Data Upload was displayed. Clicking it gives the following error (and nothing more, that's the only content of the console):
SPIFFS Error: esptool not found!
I then tried two different locations to unpack the ZIP to:
- /Volumes/Daten/myuser/Documents/Arduino (as mentioned in the README
- /Volumes/Daten/myuser/Library/Arduino15/packages/esp8266 because I thought the ESPTool should be placed somewhere there
UPDATE:
I now tried https://github.com/esp8266/arduino-esp8266fs-plugin/releases/tag/0.4.0 and unpacked it to /Volumes/Daten/myuser/Documents/Programmierung/Arduino/tools/. With this the IDE is doing some stuff, that's the output of the console:
[SPIFFS] data : /Volumes/Daten/myuser/Documents/Programmierung/Arduino/210405_ESP8266_Webserver/data
[SPIFFS] size : 64
[SPIFFS] page : 256
[SPIFFS] block : 4096
/style.min.css
[SPIFFS] upload : /var/folders/ts/x85rx6416cx5nly2kl7qgbw80000gn/T/arduino_build_530417/210405_ESP8266_Webserver.spiffs.bin
[SPIFFS] address : 0xEB000
[SPIFFS] reset : --before default_reset --after hard_reset
[SPIFFS] port : /dev/cu.usbserial-02QRSP1H
[SPIFFS] speed : 115200
[SPIFFS] python : python
[SPIFFS] uploader : /Volumes/Daten/myuser/Library/Arduino15/packages/esp8266/hardware/esp8266/2.7.4/tools/upload.py
usage: esptool [-h] [--chip {auto,esp8266,esp32}] [--port PORT] [--baud BAUD]
[--before {default_reset,no_reset,no_reset_no_sync}]
[--after {hard_reset,soft_reset,no_reset}] [--no-stub]
[--trace] [--override-vddsdio [{1.8V,1.9V,OFF}]]
{load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2image,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify_flash,erase_flash,erase_region,version}
...
esptool: error: unrecognized arguments: --end
SPIFFS Upload failed!
In the end nothing worked for me. So: How do I install this plugin properly?