Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...

Documentation/ABI/testing/sysfs-bus-auxiliary

@@ -0,0 +1,9 @@
+What:		/sys/bus/auxiliary/devices/.../irqs/
+Date:		April, 2024
+Contact:	Shay Drory <shayd@nvidia.com>
+Description:
+		The /sys/devices/.../irqs directory contains a variable set of
+		files, with each file is named as irq number similar to PCI PF
+		or VF's irq number located in msi_irqs directory.
+		These irq files are added and removed dynamically when an IRQ
+		is requested and freed respectively for the PCI SF.

Documentation/bpf/libbpf/libbpf_overview.rst

@@ -219,6 +219,14 @@ compilation and skeleton generation. Using Libbpf-rs will make building user
 space part of the BPF application easier. Note that the BPF program themselves
 must still be written in plain C.
 
+libbpf logging
+==============
+
+By default, libbpf logs informational and warning messages to stderr. The
+verbosity of these messages can be controlled by setting the environment
+variable LIBBPF_LOG_LEVEL to either warn, info, or debug. A custom log
+callback can be set using ``libbpf_set_print()``.
+
 Additional Documentation
 ========================
 

Documentation/bpf/standardization/abi.rst

@@ -23,3 +23,6 @@ The BPF calling convention is defined as:
 
 R0 - R5 are scratch registers and BPF programs needs to spill/fill them if
 necessary across calls.
+
+The BPF program needs to store the return value into register R0 before doing an
+``EXIT``.

Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml

@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en7581-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The frame engine ethernet controller can be found on Airoha SoCs.
+  These SoCs have multi-GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - airoha,en7581-eth
+
+  reg:
+    items:
+      - description: Frame engine base address
+      - description: QDMA0 base address
+      - description: QDMA1 base address
+
+  reg-names:
+    items:
+      - const: fe
+      - const: qdma0
+      - const: qdma1
+
+  interrupts:
+    items:
+      - description: QDMA lan irq0
+      - description: QDMA lan irq1
+      - description: QDMA lan irq2
+      - description: QDMA lan irq3
+      - description: QDMA wan irq0
+      - description: QDMA wan irq1
+      - description: QDMA wan irq2
+      - description: QDMA wan irq3
+      - description: FE error irq
+      - description: PDMA irq
+
+  resets:
+    maxItems: 8
+
+  reset-names:
+    items:
+      - const: fe
+      - const: pdma
+      - const: qdma
+      - const: xsi-mac
+      - const: hsi0-mac
+      - const: hsi1-mac
+      - const: hsi-mac
+      - const: xfp-mac
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^ethernet@[1-4]$":
+    type: object
+    unevaluatedProperties: false
+    $ref: ethernet-controller.yaml#
+    description:
+      Ethernet GMAC port associated to the MAC controller
+    properties:
+      compatible:
+        const: airoha,eth-mac
+
+      reg:
+        minimum: 1
+        maximum: 4
+        description: GMAC port identifier
+
+    required:
+      - reg
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/en7523-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@1fb50000 {
+        compatible = "airoha,en7581-eth";
+        reg = <0 0x1fb50000 0 0x2600>,
+              <0 0x1fb54000 0 0x2000>,
+              <0 0x1fb56000 0 0x2000>;
+        reg-names = "fe", "qdma0", "qdma1";
+
+        resets = <&scuclk 44>,
+                 <&scuclk 30>,
+                 <&scuclk 31>,
+                 <&scuclk 6>,
+                 <&scuclk 15>,
+                 <&scuclk 16>,
+                 <&scuclk 17>,
+                 <&scuclk 26>;
+        reset-names = "fe", "pdma", "qdma", "xsi-mac",
+                      "hsi0-mac", "hsi1-mac", "hsi-mac",
+                      "xfp-mac";
+
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mac: ethernet@1 {
+          compatible = "airoha,eth-mac";
+          reg = <1>;
+        };
+      };
+    };

Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7622-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC built-in Bluetooth
+
+description:
+  This device is a serial attached device to BTIF device and thus it must be a
+  child node of the serial node with BTIF. The dt-bindings details for BTIF
+  device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7622-bluetooth
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ref
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/mt7622-power.h>
+
+    serial {
+        bluetooth {
+            compatible = "mediatek,mt7622-bluetooth";
+            power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+            clocks = <&clk25m>;
+            clock-names = "ref";
+        };
+    };

Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml

@@ -31,6 +31,9 @@ properties:
       This property depends on the module vendor's
       configuration.
 
+  firmware-name:
+    maxItems: 1
+
 required:
   - compatible
 
@@ -42,5 +45,6 @@ examples:
         bluetooth {
             compatible = "nxp,88w8987-bt";
             fw-init-baudrate = <3000000>;
+            firmware-name = "uartuart8987_bt_v0.bin";
         };
     };

Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml

@@ -62,6 +62,9 @@ properties:
   vdddig-supply:
     description: VDD_DIG supply regulator handle
 
+  vddbtcmx-supply:
+    description: VDD_BT_CMX supply regulator handle
+
   vddbtcxmx-supply:
     description: VDD_BT_CXMX supply regulator handle
 
@@ -74,6 +77,9 @@ properties:
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
 
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
   vddrfa1p2-supply:
     description: VDD_RFA_1P2 supply regulator handle
 
@@ -86,6 +92,12 @@ properties:
   vddasd-supply:
     description: VDD_ASD supply regulator handle
 
+  vddwlcx-supply:
+    description: VDD_WLCX supply regulator handle
+
+  vddwlmx-supply:
+    description: VDD_WLMX supply regulator handle
+
   max-speed:
     description: see Documentation/devicetree/bindings/serial/serial.yaml
 
@@ -176,14 +188,27 @@ allOf:
               - qcom,wcn7850-bt
     then:
       required:
-        - enable-gpios
-        - swctrl-gpios
-        - vddio-supply
+        - vddrfacmn-supply
+        - vddaon-supply
+        - vddwlcx-supply
+        - vddwlmx-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6390-bt
+    then:
+      required:
+        - vddrfacmn-supply
         - vddaon-supply
-        - vdddig-supply
+        - vddbtcmx-supply
         - vddrfa0p8-supply
         - vddrfa1p2-supply
-        - vddrfa1p9-supply
+        - vddrfa1p7-supply
 
 examples:
   - |

Documentation/devicetree/bindings/net/can/xilinx,can.yaml

@@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title:
-  Xilinx Axi CAN/Zynq CANPS controller
+  Xilinx CAN and CANFD controller
 
 maintainers:
   - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>

Documentation/devicetree/bindings/net/cdns,macb.yaml

@@ -146,6 +146,7 @@ patternProperties:
 
       magic-packet:
         type: boolean
+        deprecated: true
         description:
           Indicates that the hardware supports waking up via magic packet.