creat session error when use serial mode

[peak0924]

Using the example code of ShapeDemoClient, I encountered the above errors on client side.

Agent side

ShapeDemoClient side

[peak0924]

I use xrce version 2.1.1 and serial rs232

[pablogs9]

Could you paste here the whole commands you are using?

[peak0924]

agent: ./MicroXRCEAgent serial -b 115200 -D /dev/ttyUSB0 -v 6 -r agent.refs
client: ./ShapeDemoClient --serial /dev/ttyUSB0 。when it start I use command " create_session"

[pablogs9]

Where do you have both the client and the agent running? Which serial port are you using?

[peak0924]

I have Tow computer
1 computer is agent .IP 192.168.3.202 serial dev is /dev/ttyUSB0 .system is ubuntu 20.04
2 computer is client . IP 192.168.3.203 serial dev is /dev/ttyUSB0 .system is ubuntu 20.04
I use usb to serial device like this to link this tow comouter

[pablogs9]

Have you checked the proper operation of the serial link without the XRCE environment?
Are you opening the port with any other software at the same moment you are running client/agent?

[peak0924]

yes I have checked.
client computer I use command: echo "hello" > /dev/ttyUSB0
agent computer I use command: cat /dev/ttyUSB0 . then I get "hello" at this computer

[pablogs9]

Are you opening the port with any other software at the same moment you are running client/agent?

[peak0924]

no

[pablogs9]

client computer I use command: echo "hello" > /dev/ttyUSB0
agent computer I use command: cat /dev/ttyUSB0 . then I get "hello" at this computer

If you send something from the agent to the client-side it also works?

[peak0924]

yes I just try.
client-side to agent-side or agent-side to client-side are also works well

[pablogs9]

How are you connecting the RS232 side of the adaptor to the Raspberry Pi?

[peak0924]

[pablogs9]

Well it seems that the communication from the client to the agent is working since the agent creates the session but the client is not receiving the agent's session confirmation.

Please try another serial connection or use another transport layer.

[peak0924]

Well it seems that the communication from the client to the agent is working since the agent creates the session but the client is not receiving the agent's session confirmation.

Please try another serial connection or use another transport layer.

UDP and TCP is works well.what is "another serial connection" RS485?